木瓜剖分原理研究及新机型设计

针对我国目前对木瓜剖半设备研究较少,剖切方式不合理,切割效果差等问题,设计开发了新型木瓜剖半机。该机切割方式选用滑切切割的方式,由运料系统、切割系统、出料系统组成,设计合理,结构简单。为此,计算了滑切角、切割角等主要切割参数,并给出了新型剖半机的主要技术参数。试验表明:该机切割效果好,能够有效提高生产效率。     

Residue management for reducing evaporation in relation to soil type and evaporativity1

Abstract. Usual residue-management options are to remove the residue, use it as mulch with or without undercutting or to incorporate it into the soil. While the role of surface mulch in evaporation has been widely studied, the information on the effect on evaporation of mulch with undercutting or residue incorporated into soil, particularly in relation to soil type and evaporativity (E_o) is lacking. We studied the effect of wheat straw used in various ways on the course of evaporation loss from soil columns with three soils at Ludhiana, India and one soil at Bushland, Texas, USA, under two E_o's Energy-limited evaporation rates under mulch (E_om) followed the soil-specific relation E_om/E_o= a e^(bRes+cEo), where Res is residue rate t/ha and a, b and c are constants; E_o, is expressed in mm/d. In an effort to model the total evaporation (CE) during the energy-limited stage ‘U’ was obtained from appropriate CE versus time curves and (CE-U) was regressed over (t - ti)^0.5 to obtain the slope ‘α’ (Ritchie 1972) for the soil-limited evaporation stage. The observed ‘U’ was independent of mulch rate and E_o but was strongly affected by soil type, Values of ‘α’ decreased with increase in mulch rate and decrease in E_o and coarseness of soil. The otherwise short lived benefit of evaporation reduction with mulch per se, which peaked after a few days was maintained when residue was mixed with soil at the stage when evaporation reduction reached a maximum; this benefit continued for several weeks. Cumulative evaporation values computed from ‘U’ and ‘α’ agreed closely with the observed values under straw mulch for loamy sand and clay loam soils and for ‘undercut’ and ‘residue mixed’ treatments on all soils regardless of E_o, and for all situations under small E_o. However, for sandy loam and silt loam soils under E_o of 10 mm/d, the modified square root of the time function of Jalota et al. (1988) gave a better fit.     

西宁市鲜切花产业现状浅谈

通过对西宁市鲜切花产业发展的现状和存在的问题进行分析,提出了今后鲜切花发展的对策。     

改善树体结构对提高龙眼产量和品质的影响试验

通过培育不同树形,并对郁闭的龙眼果园进行疏枝、间伐试验。结果表明,建立高光效树体结构,减少郁闲果园株数,能有效改善果园通风透光条件、提高产量和果实品质;林华果场试验因疏枝改造后树高降低,冠径扩大,单株产量比对照增加121kg,果实品质显著提高;密龙果场试验园间伐后,虽然总产量略有降低,但是667m2产值比对照增加687．8元。通过调查不同果园的龙眼产量和树体结构,得到龙眼产量与树体结构相关性回归方程为Y=-60．98＋0．28X1＋3．90x2＋2．29X3。     

湿加松扦插繁殖配套技术

文章从扦插繁殖基地建设和技术环节两方面来阐述湿加松扦插繁殖配套技术。在基地建设方面,提出分区建设思路,将基地区分为生产区和配套设施两大部分,其中生产区包括采穗圃、扦插圃、炼苗圃,配套设施包括7个部分,并就基地总体布局、各区建设要点和使用设施等作了详细说明。以年产100万株扦插苗的规模为例,对基地的建设投资进行了概算。在技术方面,重点介绍了采穗母株培育技术、采穗圃营建技术、扦插繁殖技术和出圃苗木的管理技术。并对营建湿加松扦插繁殖基地的投资收益与风险作了分析。对新建湿加松扦插繁殖苗圃具有指导意义。     

3种生长素对蓝叶忍冬枝条扦插生根的影响

以蓝叶忍冬(Lonicera korolkowi‘Zabclii’)为材料,研究了2种不同浓度(50、100 mg·L-1)的生长素吲哚乙酸(IAA)、吲哚丁酸(IBA)和萘乙酸(NAA)在不同处理时间(30、60 min),对蓝叶忍冬生根部位、根数和根长的影响。结果表明,3种生长素对蓝叶忍冬枝条扦插生根都产生了一定的影响,IAA处理增加蓝叶忍冬的生根率和根数,但抑制根的伸长。NAA处理对蓝叶忍冬生根效果不明显,仅对根长有一定的促进作用。与对照相比,50 mg·L-1IBA处理60min显著增加了蓝叶忍冬的生根率和根数(P0.05)。另外,3种生长素对蓝叶忍冬枝条生根部位也有影响,3种生长素处理都可以增加皮层生根数,对切口愈伤组织的生根有一定的抑制作用。其中IBA处理对生根部位影响的效果最明显,100 mg·L-1处理30 min可以显著提高皮层生根数并抑制愈伤组织生根(P0.05)。综合比较3种生长素促进生根的效果,IBA最好,IAA和NAA次之。     

银中杨人工林抚育采伐技术研究

采用标准地调查方法,对初植密度为2 m×2m的银中杨人工林的抚育采伐开始期和采伐强度进行调查研究,确定抚育采伐开始期为8年生时,采伐强度为50%。研究确定了银中杨人工林的经营密度表,以期为生产经营提供依据。     

A Study on the Mathematical Models for Two Dimensional Guillotine Cullting-stock

Based on the analysis and study on some existed models for two-dimensional Guillotine Cutting-Stock problem, it is pointed out that some kinds of the models may miss some good cutting patterns,and some may result in inadequate solutions because of only considering the patterns with the smallest waste. A kind of revised two-dimensional cutting-stock models are developed,which transform the two-dimensional problem into the one-dimensional one using the dimension-decreasing heuristic method and whose initial patterns are considered comprehensively. In this kind of models, not only the least waste,but also the other constraints,such as the demands and the relative area of the order plates are considered.     

Two-dimensional Optimum Cutting Stock Method Based on Internet and Its Implementing Technique

Two dimensional Optimum Cutting Stock is a NP complicated problem. Each of optimum software gets the cutting results by using proximate and heuristic methods. But different optimum methods and their optimum software may not realize perfect effect according to certain data framework. Furthermore, enterprises can not buy lots of optimum software to choose the most optimized plan. Because of such problems, this paper provides a two dimensional optimum cutting stock method based on Internet and offers the real implementing technique of such method. The experiments, show that this method promotes the general optimum effect of two dimensional optimum cutting stock greatly.     

A Study on the Practical Algorithm for One Dimensional Equal Stock Cutting Problem

Based on alalysing the mathematical models for one dimensional equal stock cutting problem,a knapsack column generation algorithm has been constructed,which is a successive approximate algorithm for the practical engineering.In the end of this paper,some computational examples have been presented,which show that the convergence and optimum results of the algorithm are quite good.