四端法土壤电导率传感器恒流源设计与试验

土壤信息对于指导农业生产有着极为重要的作用,土壤电导率反映了土壤含水量、盐分、粘粒含量和类型等土壤信息,准确获取土壤电导率对于实现农业精细化生产意义重大。在各种土壤电导率测量方法中,四端法因其成本低、精度高、测量快速和操作简便而大量应用于实际测量;恒流源是四端法测量仪器的重要组成部分,其性能直接决定着测量仪器的精度以及测量范围。本文对比了3种恒流源对测量仪器测量性能的影响,发现采用Howland恒流源的四端法测量仪器高电导率测量能力强而低电导率测量范围较小,测量精度最高;采用改进型Howland恒流源的四端法测量仪器低电导率测量范围有所扩大,测量精度良好;采用基于差动放大器的恒流源的电导率仪低电导率测量范围最大,高电导率测量范围较优,测量精度良好。     

不同热加工方式对翼柄柔鱼品质的影响

探究煮制、油炸、烤制3种热加工方式对翼柄柔鱼(Sthenoteuthis pteropus)色泽、质构、硫代巴比妥酸值、生物胺及挥发性组分等指标的影响。结果表明：热加工处理后,翼柄柔鱼色泽发生明显改变,油炸处理组色泽与其他处理组差异性显著;鱿鱼的硬度和咀嚼性发生了显著变化,煮制与其他处理组相比,弹性存在显著差异;样品经不同热加工方式后的氧化程度：煮制>油炸>烤制。热加工对6种生物胺的影响存在差异：亚精胺、酪胺及精胺总体含量较低,差异不显著;生鲜鱿鱼中组胺含量为(3.23±0.20) mg/kg,经热加工分别增加了1.29倍(煮制)、3.68倍(油炸)、2.89倍(烤制)。采用SPME-GC-MS方法对生鲜、煮制、油炸、烤制翼柄柔鱼进行挥发性化合物检验,分别检出46、52、61、70种挥发性化合物。不同热加工方式对翼柄柔鱼色泽、质地、风味等食用品质的影响存在差异。研究结果为鱿鱼的热加工提供了理论指导。     

连续式秸秆捆烧锅炉设计与供暖工程减排潜力分析

针对连续式捆烧设备在连续进料过程中,秸秆捆连续稳定燃烧性能差、挥发分气体燃烧不充分、秸秆捆难燃尽,而导致热效率低、排放高的问题,该研究基于分级燃烧原理与秸秆捆燃烧特性,在设计计算过程中,对燃烧、换热、配风系统等较为重要设计参数给出了合理的参考值,并通过烟气预热干燥秸秆捆、增加挥发分二次燃尽的三级风、往复炉排增加捆间间隙等方式提高秸秆捆的燃烧性能。设备试制后,利用玉米秸秆捆为燃料开展了热工与排放性能试验。试验结果表明,连续式秸秆捆烧锅炉的平均热效率为80.37%,颗粒物、NOx、SO2平均排放质量浓度分别为48、197、7 mg/m3,环保与能效指标均符合设计要求与国家标准。并对建立的采暖示范工程进行排放、污染物等测算,结果表明采用秸秆捆烧供暖单位面积可减少标煤使用量23.1 kg/m2,CO2当量排放量58 kg/m2。该研究能为秸秆能源化利用与北方清洁区域供暖提供技术支撑,助力农业农村领域碳达峰、碳中和的目标实现。     

基于无人机遥感影像的玉米冠层温度提取及作物水分胁迫监测

针对当前无人机热红外遥感提取冠层温度不准确、监测作物水分胁迫状况精度不高的问题,该研究以不同水分处理的拔节期夏玉米为研究对象,利用无人机获取试验区域热红外和可见光图像资料,分别采用Otsu算法、EXG-Kmeans算法和Otsu-EXG-Kmeans算法获取冠层区域图像,并对提取结果进行精度评价,而后采用最优算法求得对应作物水分胁迫指数（Crop Water Stress Index,CWSI）,通过分析CWSI同土壤含水率相关关系以及CWSI日平均变化趋势来监测玉米水分亏缺状况。结果表明：1）相比于其他方法,Otsu-EXG-Kmeans算法对冠层温度提取精度更高（用户精度为95.9%）,提取的冠层温度更接近实测温度（r=0.788）,可以准确获取图像冠层温度。2）相比于冠层温度,CWSI与土壤含水率的相关性更高（r= -0.738）,CWSI日平均变化趋势更符合实际情况,可更加精确地监测玉米缺水状况。该研究为无人机遥感精准监测作物水分胁迫状况提供参考。     

反光膜对育肥羔羊生理指标和生长性能的影响

该研究对单彩钢屋顶外表面铺设反光膜,以解决实际生产中单彩钢屋顶育肥羊舍热应激严重的问题。选择两栋建筑结构相同的敞棚羊舍,其中一栋单彩钢屋顶外铺反光膜（铺膜舍）,另一栋单彩钢舍作为对照（对照舍）。利用红外热像仪对夏季（6－8月份）屋顶内表面温度进行阶段性（前期第1～7 天、中期第8～37天和后期第38～67天）热成像分析,同时计算各阶段屋顶内表面辐射热,并通过测定育肥羔羊生长性能和生理指标评价反光膜缓解育肥羔羊热应激的效果。结果表明：1）试验期间对照舍屋顶内表面温度、屋顶内表面辐射热均在11:30达到最高值,铺膜舍则在14:00达到峰值;整个试验期铺膜舍屋顶内表面温度较对照舍平均降低7.31 ℃,尤其每天9:00-16:30降低显著（P<0.05）,此外,铺膜舍屋顶内表面辐射热较对照舍降低8.85%。2）试验全期铺膜舍环境温度较对照舍平均降低0.55 ℃,尤其前期9:00-13:00显著降低,达1.78 ℃（P<0.05）。 另外,舍内环境温度与屋顶内表面温度、屋顶内表面辐射热均表现出显著线性正相关关系（P<0.01）;3）试验全期铺膜舍羔羊日均质量增重较对照舍显著提高10.97%（P<0.05）,试验中期和后期两舍育肥羔羊的饮水量存在显著差异（P<0.05）,分别较对照舍提高15.58%和12.66%;呼吸频率较对照舍降低5.31%（P<0.05）。可见,单彩钢屋顶外铺反光膜可有效改善屋顶的隔热性能,改善育肥羔羊的生理指标和生长性能,缓解其热应激。     

热胁迫对白梭吻鲈鳃组织结构及抗氧化指标的影响

温度是导致鱼类生理变化的最重要的环境因素之一。热应激导致氧化应激,破坏抗氧化防御系统,并导致脂质和组织病理学的损害。白梭吻鲈(Sander lucioperca)属于亚冷水性鱼类,最适生长水温20～24℃。近年来,由于夏季气温极高,中国池塘出现了大量的白梭吻鲈死亡,白梭吻鲈的水产养殖业一直面临着高温的严峻挑战。鱼鳃参与鱼类许多重要功能,如呼吸,渗透调节和排泄,与外部环境保持密切接触,对水质变化特别敏感。为探究热胁迫对白梭吻鲈鳃组织结构及抗氧化指标的影响,将100尾鱼暴露于28℃,31℃,34℃,36℃热应激2h,以23℃作为对照组。收集鳃用于石蜡切片制备,并将苏木精伊红（HE）染色用于一般组织学观察。测定超氧化歧化酶（SOD）、过氧化氢酶（CAT）、谷胱甘肽过氧化物酶（GPX）活性和丙二醛（MDA）等抗氧化指标。结果显示,28 ℃组鳃小片发生充血,31 ℃组部分鳃小片末端卷曲变形、上皮细胞水肿,34 ℃组鳃小片变形加重,且有少量融合,上皮细胞水肿加重、明显隆起,鳃小片之间粘液细胞肥大、增生,36 ℃组相邻鳃小片大量融合且严重变形,卷曲混乱排列,大量上皮细胞坏死、脱落,鳃丝粘液细胞增生、肥大;随着胁迫温度升高,鳃中SOD、CAT、GPX、MDA均整体呈现先升高、后降低的变化趋势,且在36℃时显著下降。这表明在热应激后,鱼体内ROS增加,脂质过氧化增加。由于体内产生大量的ROS和H2O2,机体也增加了GPX和CAT的合成。当暴露在36℃时,胁迫强度超过白梭吻鲈的适应能力,抗氧化系统功能无法正常进行。表明热胁迫对白梭吻鲈鳃组织有损伤,且随着热胁迫温度的升高,其鳃受损情况越发严重。     

Chemical and Thermal Properties of Freshwater Prawn (Macrobrachium rosenbergii) Meat

Chemical compositions and thermal properties of cultured freshwater prawn meat (FPM) were studied. FPM contained 83.2% protein (dry basis), 62.7% of which was myofibrillar protein. Pepsin-soluble collagen (PSC) and insoluble collagen (ISC) contents were 0.63 and 0.32%, respectively. Both collagens were similar to type V collagen from porcine placenta. Glutamic acid/glutamine, arginine, aspartic acid/?asparagine, and lysine were abundant amino acids in FPM. Glycine, proline, hydroxyproline, and aspartic acid/?asparagine were predominant in both collagens. FPM exhibited thermal transition temperatures (T_max) of 48.3 and 64.7°C, whereas T_max of PSC and ISC were 43.0 and 46.0°C, respectively. Textural changes in FPM during post-mortem storage on ice are plausibly dependent upon its compositional and thermal properties.     

大菱鲆生长和耐高温性状的遗传参数估计

对来自40个家系的753尾大菱鲆个体进行耐高温实验,测定其生长和耐高温性状.基于是否考虑全同胞家系效应,建立了两种动物模型,用于估算大菱鲆生长和耐高温性状的遗传参数.利用WOMBAT程序采用平均信息约束极大似然法估计各模型中性状的方差组分,用似然比检验法进行不同模型的差异检验.方差组分分析结果显示,估计体质量遗传参数时,采用模型Ⅰ效果较好,相应遗传力为(0.22±0.09);估计肥满度时,两模型间差异不显著,其遗传力范围为(0.21±0.18)～(0.39±0.11);估计耐热性时,采用模型Ⅰ比较理想,遗传力为(0.026±0.034).表型和遗传相关分析结果表明,体质量与肥满度、耐热性的表型相关系数分别为0.13和0.04,肥满度与耐热性的表型相关系数为0.13;体质量与肥满度、耐热性遗传相关系数分别为0.01和-1.00,肥满度与耐热性的遗传相关系数为0.05.研究结果表明,没有考虑全同胞家系效应的模型Ⅰ是估计大菱鲆生长和耐高温性状遗传参数的较好模型.     

Effect of thermal stress on Hsp70 gene expression and female reproductive performance of giant freshwater prawn,Macrobrachium rosenbergii

Using Hsp70 as a biomarker, thermal stress impinges on reproductive organs, ovary and hepatopancreas were being analyzed by determining the expression of Hsp70 mRNA inside the organs after the adult inter‐molt females were subjected to thermal treatment at 35, 30 and 28°C (Control). Results showed the expression of Hsp70 mRNA under thermal treatment of 35°C after 2 hr recovery in ovary were upregulated at 2, 4, 6, 12, 24 hr and 30 days compared to control whereas in hepatopancreas under similar treatment, the expression of Hsp70 mRNA were significantly higher than control at 6, 24 hr and 30 days. Frequency of reproductive molt at 35°C showed the ovary of females were failed to develop and only entered common molt along three consecutive molt cycles. For 30°C thermal treatment, the expression of Hsp70 mRNA was significantly higher than control after 2 hr recovery but returned to normal afterwards until 30 days’ thermal treatment. Maternal heat shock for 2 hr at 35°C were found to give significantly lower frequency of reproductive molt and longer duration of ovarian development and incubation period whereas maternal heat shock for 2 hr at 30°C gave lower frequency of reproductive molt, slower development of embryo and lower hatching success compared to untreated control. This study suggests that short and long‐term thermal stress at 30 and 35°C were found to affect the induction of Hsp70 mRNA in reproductive organs of Macrobrachium rosenbergii and also influence their reproductive performance.     

Thermal preference and tolerance of green abalone Haliotis fulgens (Philippi, 1845) and pink abalone Haliotis corrugata (Gray, 1828)

The thermoregulatory behaviour of green abalone Haliotis fulgens and pink abalone H. corrugata was investigated. Haliotis fulgens juveniles ranging in wet weight from 3.0 to 3.3 g and from 28.7 to 30.5 mm shell length and of H. corrugata 2.0 g and 25.7 mm in shell length were exposed to 19°C for 30 days in a flow‐through water system. Temperature preference was determined in a horizontal thermal gradient and was found to be 25.4°C for green abalone and 25.0°C for pink abalone. Displacement velocity was 4.3 cm h⁻¹ for H. fulgens and 12.8 cm h⁻¹ for H. corrugata. The optimum temperature for growth calculated for both abalone species was 24.6 and 24.5°C respectively. The critical thermal maxima (CTMax) of H. fulgens and H. corrugata were determined as a measure of thermal tolerance. Abalones were subjected to increasing water temperatures at a rate of 1°C on 30 min until they detached from the substrate. The CTMax at 50% were 33.6 and 32.0°C for green and pink abalone respectively. The results are discussed in relation to site selection and commercial rearing.