基于离散元法的深松作业玉米秸秆运动规律

东北垄作区玉米秸秆还田条件下,针对垄台播种带秸秆残茬易导致深松铲以及后续机具缠草堵塞和阻力增加等问题,建立深松铲-土壤-秸秆-根茬的离散元模型,分析仿真因素秸秆距垄台中心距离、秸秆与机具前进方向夹角、根茬状态（根茬中间切割、根茬一侧切割、根茬挑起和无根茬）和秸秆之间相互影响对深松作业过程中秸秆拨离垄台的影响。进一步探究深松铲作用下垄上秸秆运动规律并分析其扰动比阻（秸秆扰动力矩与深松铲阻力之比）。仿真结果表明：秸秆距垄台中心距离对秸秆位移中的水平侧向运动的影响最大;秸秆水平侧向位移随着秸秆与机具前进方向夹角增大呈减小趋势;根茬状态影响秸秆位移的主次顺序依次为：根茬挑起、根茬一侧切割、无根茬、根茬中间切割;当秸秆距垄台中心距离为60 mm时,秸秆之间相互影响对秸秆位移中的前进方向运动的影响最大;当秸秆距垄台中心距离大于60 mm,秸秆前进方向位移呈增大趋势。秸秆运动的力矩变化趋势为平稳变化,后产生峰值,最后又趋于平稳;影响秸秆力矩的主次顺序依次为：根茬状态、秸秆之间相互影响、秸秆距垄台中心距离、秸秆与机具前进方向夹角。深松过程中,秸秆扰动比阻在切割根茬一侧时达到最大值0.152 mm。田间对比试验结果表明,仿真模型得到的秸秆总位移、水平侧向、前进方向和垂直方向位移与田间试验值的误差分别为0.36%～9.67%、0.16%～12.31%、0.56%～10.11%和0.43%～4.63%,秸秆力矩的误差为0.16%～11.06%。研究结果可为深松铲设计以及优化提供一定的理论依据。     

基于SD-SVD-Burg的玉米叶片铜铅污染甄别与程度诊断

为研究一种快速甄别作物受重金属污染的元素类别和所受污染程度的方法,于2017年设置不同梯度铜(Cu)、铅(Pb)胁迫下的玉米盆栽实验,对玉米的紫谷、绿峰和红边3个光谱特征区间的高光谱数据进行光谱一阶微分和奇异值分解处理,并结合Burg算法绘制功率谱密度曲线,同时利用2014年采集的光谱数据作为验证组检验该模型的稳定性。结果表明:健康玉米叶片与不同浓度Cu、Pb胁迫下玉米叶片光谱信号的功率谱密度曲线的波峰数及波峰坡度均不相同。功率谱曲线平均功率和玉米叶片中Cu、Pb含量的相关系数最高可达0.9958,证明该方法在对玉米进行污染元素种类辨别和污染程度诊断方面具有可行性,不同年份Cu与Pb胁迫下绿峰功率谱曲线平均功率与玉米叶片中Cu、Pb含量的相关系数分别为0.9213和0.9915,进一步验证该算法在玉米Cu、Pb污染诊断方面具有稳定性与普适性。     

Analysis of static structural mechanics of vertical axis wind turbine with lift-drag combined starting structures

In this paper the finite element analysis was carried out for a composite vertical axis wind turbine with lift-drag combined starting structures to ensure the structure safety of a vertical axis wind turbine(VAWT). The static and modal analysis of rotor of a composite vertical axis wind turbine was conducted by using ANSYS software. The relevant contour sketch of stress and deformation was obtained. The analysis was made for static structural mechanics, modal analysis of rotor and the total deformation and vibration profile to evaluate the influence on the working capability of the rotor. The analysis results showed that the various structure parameters lie in the safety range of structural mechanics as given in the relative standards. The analysis showed the design safe to operate the rotor of a vertical axis wind turbine. The methods used in this study can be used as a good reference for the structural mechanics′ analysis of VAWTs.     

Effects of supplemental phytic acid on the apparent digestibility and utilization of dietary amino acids and minerals in juvenile grass carp (Ctenopharyngodon idellus)

A feeding trial was conducted for 8 weeks to evaluate the effects of supplemental phytic acid (PA) on the apparent digestibility and utilization of dietary amino acids (AAs) and minerals in juvenile grass carp. Five experimental diets consisted of graded levels of PA (0.2, 4.7, 9.5, 19.1 and 38.3 g kg^?1, named as P0, P5, P10, P20 and P40). Triplicate groups of fish (initial weight, 22.37 ± 0.16 g) were fed twice daily (08:00 and 16:00 h). The crude protein content in whole body significantly (p < .05) decreased in fish fed with 19.1 and 38.3 g PA kg^?1 diet. Supplemental PA (>4.7 g kg^?1) significantly reduced the apparent digestibility coefficient (ADC) of AAs (Asp, Thr, Ser, Glu, Gly, Ala, Cys, Val, Met, Ile, Leu, Phe, Lys, Pro, His and Arg) and the ADC of minerals (P, Ca, Mg, Zn, Cu, Fe and Mn) in grass carp. The contents of minerals (P, Ca, Mg and Zn) in whole body and bone were also found to be significantly reduced in dietary PA > 4.7 g kg^?1, while the bone ash, serum Alkp and Zn contents were found to be significantly decreased when the PA supplementation level was above 9.5 g kg^?1, and the contents of serum Ca and Mg were found to be markedly altered in higher PA‐supplemented groups. The results indicated that supplemental PA decreased the apparent digestibility and utilization of AAs and minerals, and thus reduced the feed utilization of grass carp, suggesting that the level of total PA should be below 4.7 g kg^?1 in grass carp diet.     

Tissue indicators of element status in Atlantic salmon (Salmo salar) post-smolts: effect of fasting

Two groups of Atlantic salmon post-smolts previously fed diets either unsupplemented or supplemented with Zn, Fe, Cu and Mn were fasted for 6 weeks in order to study the reliability of tissue indicators of element status during fasting. The fish were weighed at 2-week intervals and samples of whole fish liver, vertebrae, serum and eyes were taken for analyses of elements by atomic absorption spectrometry.
Body weight, per cent dry matter, condition factor and haematocrit values decreased during the fasting period. The concentration of elements in whole body remained constant, indicating that whole body is a stable indicator of element status during fasting. Other tissues seemed to be more sensitive (i.e. hepatic Fe concentration and vertebrae Zn and Mn concentrations). The serum concentrations of the elements generally decreased during fasting, especially for P and Zn. Element concentrations in whole body and most tissues during fasting were generally more dependent upon initial element status than on the fasting itself.
Care should be taken in drawing conclusions about the element status of fish based solely upon the examination of serum concentrations, and more than one tissue indicator should be used in the establishment of the element status of fish.     

种青养鱼模式下的草鱼肌肉营养成分和品质特性

为探究种青养鱼养殖模式对草鱼肌肉营养成分和品质特性的影响,随机选取以种青喂草为主养殖模式下养殖的草鱼(生态草鱼)和投喂人工配合饲料进行养殖的草鱼(饲料草鱼)各16尾,测定其肌肉系水力和质构特性指标,以及肌肉常规营养成分、矿物元素、氨基酸和脂肪酸含量。结果显示,生态草鱼和饲料草鱼肝体比和空壳率无显著性差异;生态草鱼肌肉系水力指标中滴水损失显著低于饲料草鱼,冷冻渗出率不显著地低于饲料草鱼,失水率不显著地高于饲料草鱼,p H值无显著性差异;肌肉的硬度、弹性、凝聚性、胶黏性和回复性均无显著性差异;生态草鱼粗脂肪含量显著低于饲料草鱼,水分、灰分、粗蛋白含量均无显著性差异;生态草鱼P和Fe含量均显著高于饲料草鱼,Mg、Mn和Cr含量均极显著高于饲料草鱼;生态草鱼和饲料草鱼肌肉氨基酸组成基本一致,均含有17种氨基酸,其中人体必需氨基酸总量分别为6.85%和6.27%。生态草鱼必需氨基酸指数(EAAI)为76.07,而饲料草鱼为77.29,饲料草鱼略高于生态草鱼。生态草鱼和饲料草鱼肌肉均含19种脂肪酸,其中棕榈酸、花生四烯酸(ARA)、亚油酸(LA)、油酸、二十二碳六烯酸(DHA)和硬脂酸含量较高,为主要脂肪酸,而花生五烯酸(EPA)+DHA含量分别为8.95%和10.70%,且差异显著。研究表明,生态草鱼和饲料草鱼在肌肉质构特性方面无显著性差异,与饲料草鱼相比,生态草鱼具有肌肉系水力强、低脂肪和矿物元素含量高的特点。     

钾素不同用量对莴苣硝酸盐积累的影响

以莴苣为试材,采用通用随机排列设计,利用基质培育方法,研究不同供应水平的钾素营养对莴苣硝酸盐积累的影响.结果表明:在供试条件下,硝酸盐含量与硝酸还原酶活性在一定浓度范围内都随着钾素浓度的增大而降低.     

滚动轴承摩擦力矩的非线性特

以混沌理论为基础,通过试验研究滚动轴承摩擦力矩时间序列的非线性特征评估问题,为精确计算滚动轴承摩擦力矩的动态性能奠定基础.用关联维数标准差刻画摩擦力矩的不确定性,用关联维数均值描述摩擦力矩非线性特征的演变历程.研究表明,滚动轴承属于确定的非线性动力学系统,但其摩擦力矩呈现出明显的不确定性.随着转速的增加,滚动轴承摩擦力矩关联维数标准差与均值都呈现出非线性增大的趋势.     

基于设计模板的快速变型设计方法

传统的变型设计方法存在变型过程复杂,容易产生约束冲突的问题.针对零部件之间依赖关系复杂,设计过程需要通过交互和人工干预的形式才能完成配置与变型的问题,提出了在模板框架下的快速变型设计方法.利用模板的灵活性和信息载体功能,提出了可变型单元的概念,通过可变型单元之间建立相互关联实现对象之间的参数联动,在模板定义域范围内实现产品零部件的快速变型.以变速箱为实例,通过产品的结构变型实现产品的系列化,在同系列产品中通过几何参数的变更实现产品的多样化.     

基于响应面法的板料成形工作模面几何参数优化

阐述了以响应面法建立板料成形参数与有限元模拟结果的代理模型的基本原理;介绍了板料成形中的设计变量、目标函数、约束条件,多目标优化的处理方法;基于响应面法.以汽车后桥悬架内板零件为研究对象,成形后最小板料厚度为优化目标,成形极限图为约束条件,建立了模面几何参数优化模型;对模面几何参数进行优化并获得最优参数组合;以最优几何参数组合进行了实际的冲压试验,验证了优化结果.