A New Method for Parameterized Design of Metallic Doors and Windows

According to the graphics characteristics of metallic doors & windows design and based on the research of graphics dimension restriction problems. This paper provides a new method for parameterized design of metallic doors & windows in virtue of expression solution. In this method, the restrictions of graphic elements have been changed into the parameter expressions of sizes and positions of graphic elements. Through the calculation of such expressions, the parameter driven method has been reached. Thus the parameterization of graphics can be easier and quicker than before. It can be used to setup the open parameterized graphics libraries.     

基于KPCA-WLSSVM的建筑能耗预测模型

为降低建筑能耗影响因素间复杂相关性对模型性能的影响,建立了一种基于KPCA-WLSSVM的建筑能耗预测模型。利用核主元分析(KPCA)对输入变量进行数据压缩,消除变量之间的相关性,简化模型结构;进一步采用加权最小二乘支持向量机(WLSSVM)方法建立建筑能耗预测模型,同时结合一种新型混沌粒子群-模拟退火混合优化(CPSO-SA)算法对模型参数进行优化,以提高模型的预测性能及泛化能力。通过将KPCA-WLSSVM模型方法应用于某办公建筑能耗的预测中,并与WLSSVM、LSSVM及RBFNN模型相比,实验结果表明,KPCA-WLSSVM模型方法能有效提高建筑能耗预测精度。     

Analysis on the Grain Growing Characters in Wheat under Different Seedling Density

通过对不同密度处理的小麦子粒生长过程的分析表明：小麦开花后子粒鲜重、体积均呈“低—高—低”的变化,鲜重的变化略滞后,开花后含水量则不断下降,下降速率最快时期与灌浆速率最高时基本吻合。用logistic方程拟合了不同密度小麦子粒灌浆过程,快增期的天数和灌浆速率比较稳定;缓增期天数和灌浆速率的变异系数较大。因此,在提高缓增期灌浆速率的基础上,延长灌浆缓增期是目前增加粒重的关键。     

不同降解阶段填埋垃圾体的气体渗透特性研究

通过对不同降解阶段填埋垃圾体渗透系数的测定，研究了在不同压实密度、不同含水率条件下垃圾体渗透特性的变化情况，实验表明：1.对不同降解阶段的填埋垃圾体，新鲜垃圾及混和垃圾的渗透系数接近，腐熟垃圾明显高于前两者；随压实密度增加，其气体渗透系数均呈指数规律递减；2.随着垃圾体含水率的增加，腐熟与新鲜垃圾的渗透系数均呈线性规律递减，含水率对渗透系数的影响要远小于压实密度的影响；3.新垃圾、混合垃圾、腐熟垃圾均具有较显著的各向异性特征，在典型压实密度下，水平方向的气体渗透系数Kh为垂直方向渗透系数Kv的3.5-27.3倍。     

基于SOLID EDGE的EBOM表的生成

论述了BOM的分类和组成方法，介绍了基于Solid edge的EBOM的生成过程，即在Access2002中构建EBOM表，利用Visual Basic编写应用程序，并把在Solid Edge基础上建立的产品模型的物料数据自动生成到EBOM表中。     

Effects of planting density on the productivity and water use of tea (Camellia sinensis L.) clones: I. Measurement of water use in young tea using sap flow meters with a stem heat balance method

Sap flow meters based on the stem heat balance method were used to measure the mass flow rates or water use in young potted tea (Camellia sinensis L.) plants of clones AHP S15/10 and BBK35. The meters were constructed on site and installed onto the stem or branch sections of field growing plants in an experiment originally designed to study the effects of plant population density and drought on the productivity and water use of young tea clones. The objective of the study was to use the SHB method as a first attempt to use sap flow meters for determining the water use of young tea growing in the field under well watered conditions in Tanzania. The results are reported and recommendation made for further work on using the technique.     

春小麦高产叶龄模式的研究

本研究根据春小麦的叶龄进程，对水、肥、密等影响产量的主要因素进行优化组合，提出了旨在提高春小麦的产量及获得最佳效益的高产模式，为指导我国北方春小麦的生产提供了科学依据。     

渠道密度与渠系水利用系数关系研

为了研究灌区渠道密度与渠系水利用系数之间的关系，首先从分析渠道水的渗漏情况入手,分析了渠系水利用系数与渗漏之间的关系,建立了在相同衬砌条件下渠道密度与渠系水利用系数之间的数学关系。然后提出有关渠道密度概念，这一概念的提出有利于灌区渠道分布合理性的进一步评价。渠道密度与渠系水利用系数两者之间关系式的确立，有助于从理论上评价渠道分布对渠系水利用系数的影响。