毛竹材材性变异的研究

通过对毛竹材纤维形态，组织比量、纤维素含量和基本的分析测定，研究了不同年龄、不同胸径、竹秆不同部位栲生性状的变异特点结果表明，竹材纤维长度主要受竹秆部位的影响，与年龄和胸径无显著相关，组织比量与年龄无显著相关，与胸径有一定相关；纤维素含量和基本密度与年龄、胸径、竹秆部位均有关系，从材性变异特点来看，经营培育小径级毛竹对制浆造纸更有利。     

The effects of within-species and between-species variation in wood density on the photodegradation depth profiles of sugi (Cryptomeria japonica) and hinoki (Chamaecyparis obtusa)

Low density wood is more rapidly eroded than denser wood when exposed to the weather, possibly because it is more susceptible to photodegradation. Fourier transform infrared microscopy was used to examine: (1) the depth of photodegradation in earlywood and latewood of sugi (Japanese cedar) and earlywood of hinoki (Japanese cypress) exposed for up to 1500 h to artificial sunlight emitted by a xenon lamp (375 W/m² within the 300 to 700 nm spectral range); and (2) the relationship between the density of wood tissues and depth of photodegradation. The depth of photodegradation varied between species (sugi and hinoki) as well as within a growth ring (sugi earlywood and latewood), and there was an inversely proportional relationship between depth of photodegradation and wood density. These findings may explain why low density earlywood is more rapidly eroded than latewood during weathering, and more generally, why there is an inverse relationship between the density of wood species and their rate of erosion during artificial and natural weathering. Part of this work was presented at the 54th Annual Meeting of the Japan Wood Research Society, Sapporo, August 2004     

Predicting moisture content and density distribution of Scots pine by microwave scanning of sawn timber II: evaluation of models generated on a pixel level

The purpose of this study was to use images from a microwave sensor on a pixel level for simultaneous prediction of moisture content and density of wood. The microwave sensor functions as a line-scan camera with a pixel size of 8mm. Boards of Scots pine (Pinus sylvestris), 25 and 50mm thick, were scanned at three different moisture contents. Dry density and moisture content for each pixel were calculated from measurements with a computed tomography scanner. It was possible to create models for prediction of density on a pixel level. Models for prediction of moisture content had to be based on average values over homogeneous regions. Accuracy will be improved if it is possible to make a classification of knots, heartwood, sapwood, etc., and calibrate different models for different types of wood. The limitations of the sensor used are high noise in amplitude measurements and the restriction to one period for phase measurements.     

Veneer strand flanged I-beam with MDF or particleboard as web material II: effect of resin type,application rate,strand dimension,and pressing time on the basic properties

Optimization of the manufacturing conditions of the veneer strand flanged I-beam invented in the previous study was investigated using different combinations of strand dimensions, resin types between web and flange, different pressing times, and different wood–resin moisture contents under conventional hot pressing conditions. The main results revealed that the strand dimensions have no effect on the bending properties of the flange part and the dimensional stability of the I-beam. Increasing the resin application rate between strands was found to improve the dimensional stability of the I-beams. The use of isocyanate (MDI) resin between web and flange significantly improved the bond strength between web and flange, the modulus of rupture of the I-beam, and the modulus of rupture of the flange part. Dimensional stability was also improved. Shortening the pressing time from 20 to 12min was found to be feasible. Using low wood-resin moisture content was found to interfere with the curing of the phenol–formaldehyde (PF) resin at the flange part resulting in poor quality beams. Of the three moisture content levels tested, 12% was found to be the optimal level for producing I-beams with balanced mechanical properties and dimensional stability.Part of this work was presented at the 53rd Annual Meeting of the Japan Wood Research Society, Fukuoka, March 2003     

再生聚丙烯与木刨花复合材料的密度和木塑比对复合材料主要性能的影响

研究了用异氰酸酯树脂为胶粘剂,木材刨花与回收聚丙烯为主要材料的复合材料的主要力学性能和尺寸稳定性。结果表明,密度对复合材料的性能有很大的影响,密度越大,力学强度越高,吸水厚度膨胀率基本越低;木塑配比对复合材料的力学性能有一定的影响,力学性能均随着配比的增加呈现不同程度的下降趋势;配比对吸水厚度膨胀率影响明显,配比越大,吸水厚度膨胀率越低,且密度大时,影响就越显著。     

不同密度对旱地藜麦产量性状的影响

为了确定藜麦在白银市种植的适宜密度,以品种银藜1号为试验材料,采用方差分析和处理间多重比较差异显著性分析,试验观察了不同定植密度对藜麦生育期、主要性状以及产量的影响。结果表明,定植密度为株距40 cm、行距50 cm时,银藜1号的性状、产量表现最好,折合产量为1 791.67 kg/hm2,建议推广应用。     

种植密度对不同茴香品种生长和产量的影响

以9个民勤地方茴香品种为试验材料,研究了不同种植密度对不同茴香品种株高、茎粗、分枝数、结实花序数、千粒重和产量的影响,确定不同民勤地方茴香品种的最佳密度。结果表明,大粒高秆晚熟茴香和割茬茴香的最适种植密度均为13.35万株/hm²,产量分别为3 819.05、3 990.48 kg/hm²;东润大粒高秆晚熟茴香、大粒高秆早熟茴香、小粒高秆晚熟茴香和小粒高秆早熟茴香的最适种植密度均为14.85万株/hm²,产量分别为4 361.90、5 238.10、4 695.24、3 980.95 kg/hm²;酒泉小粒高秆早熟茴香、东湖大粒高秆早熟茴香和大粒矮秆早熟茴香的最适种植密度为16.50万株/hm²,产量分别为5 228.57、4 180.95、4 352.38 kg/hm²。     

玉米品种密度试验研究

作物品种是影响作物产量的主要因素。通过研究在子洲的川地上,7个玉米品种在3 000株·667m^-2、4 000株·667m^-2、5 000株·667m^-2和6 000株·667m^-2这四个密度的农艺性状和产量等。研究表明：陕单8806在4 000株·667m^-2下获得较高产,陕单636、陕单650、郑单958、陕单609在5 000株·667m^-2的密度下产量最高,登海9号和东单60在6 000株·667m^-2下产量最高。     

油松建筑材密度管理图的编制及其应用

针对建筑材目的油松人工林经营措施,探讨不同生长发育阶段油松人工林密度调控下蓄积变化,为森林可持续经营提供科学依据。对河北平泉阳坡中土、阴坡中土和阴坡厚土3种主要立地类型的全生命周期油松人工林编制密度管理图,得出培育小、中、大径级建筑材措施。结果表明:河北油松建筑材林的培育,阳坡中土培育小径材、阴坡中土和阴坡厚土培育中大径材,期间经过2~3次间伐以达到高效培育的目的。阳坡中土林分,初植密度3 000~3 300株/hm2,10年生间伐强度12%,15年生强度20%,25年生强度25%,主伐时树高级为9~11 m,培育小径材。阴坡中土林分,初植密度2 700~3 000株/hm2,9年生间伐强度25%,19年生强度30%,主伐时树高级为9~11 m,培育中径材;初植密度2 200~2 500株/hm2,9年生间伐强度20%,17年生强度25%,27年生强度30%,主伐时树高级为11~13 m,培育大径材。阴坡厚土林分,初植密度2 000~2 300株/hm2,7年生间伐强度20%,15年生强度30%,主伐时树高级为11~13 m,培育中径材;初植密度1 000~1 200株/hm2,7年生间伐强度20%,13年生强度20%,23年生强度25%,主伐时树高级为13~15 m,培育大径材。