5HC-1型牧草保质干燥机的研制

采用钢丝带水平输送式结构,与混流、余热回收加热、气流翻铺等先进的干燥工艺对紫花苜蓿加工处理;并在试验的基础上,对牧草保质干燥机的主要结构及其性能参数进行研究,设计出了适合于农牧场及畜牧小区的机型.经性能测试与实践证明,该机烘后牧草品质好、生产效率高、成本低,促进了集约化畜牧业的快速发展.     

五轴数控加工叶片无干涉刀位轨迹的计算

根据微分几何特性，提出五坐标数控加工叶片时对叶片的工作面和背面的刀位轨迹计算分开予以讨论，对工作面而言，利用平头立铣刀加工时不存在干涉，而对背面而言，可能存在干涉。根据干涉的种类，分别对全局干涉和局部刀具干涉提出了快速判定依据，并对干涉点进行了修正。指出利用Iso-scallop法可获得最优的轨迹和蔗，并给出了实例。     

小流域的综合治理

1984年以来,舒城县采取工程和生物措施相结合的办法,对胡家河等6个小流域进行了综合治理。本文扼要地将在治理和管护工作中积累的经验、方法以及其成效、研究资料介绍给大家,以供参考。     

The River Wadu role play — ten years experience

This paper describes a role playing planning exercise that has been used for training agriculturists, engineers and agricultural economists for more than ten years. It sets out the objectives and key features of the exercise and the experience that has been gained in its use. The exercise has been found to successfully test and integrate subject matter expertise acquired from formal teaching. It also highlights the multiple and often conflicting objectives of irrigation planning, and the need for full evaluation of alternatives and sound technical judgements under conditions of inadequate data and time pressure. The exercise is also successful in developing professional personal skills such as group working, interviewing and presentation, and is recommended as an effective training aid.     

喷灌工程规划设计多方案选优的语言化与定量化相结合模糊综合评判数学模型

本文提出了喷灌工程规划设计多方案选优的语言化与定量化相结合的模糊综合评判数学模型,从而可得到比传统喷灌工程规划设计方案选优方法更为合理、满意的结果。     

保雨灌溉技术的研究与推广

保雨灌溉技术的核心是向天空要水,与蒸发夺水,充分利用自然降水和土壤水分,满足作物需要。在作物需水不足时,提取地下水补充灌溉。三年试验结果表明,保雨灌溉比常规井灌年均节水2091mm/hm~2,增产粮食2020kg/hm~2,促进了优质高效农业的发展。     

基于GIS技术的小型水库规划方法

在小流域治理中，为了提高水库规划的精确度和速度，提出了基于GIS技术来实现小型水库规划的方法。主要是基于GIS技术的库客曲线的制作方法；小型水库规划的可视化。在GIS中，真实地形在计算机中的表达用数字高程模型(DEM)表示，水库规划的三维可视化环境的实现需利用0penGL技术。     

抗旱保水剂应用特性的实验研究

应用抗旱保水剂是近年来发展较快的一种非工程节水灌溉措施，在实际应用中，土、肥、水等多种因素对保水剂持水能力有很大影响。通过大量试验，对保水剂在各种应用条件下的持水特性进行了定性研究，提出了应用保水剂应注意的问题及若干建议。     

海子水库灌区节水型灌溉制度的制定

本文介绍了中日双方专家团在海子水库灌区现场调查中,实测土壤水分特征值的方法,土壤水分曲线的制定和应用,负压计观测值的应用,计算节水型灌溉用水量和灌水间隔日数的方法,并用节水型频繁灌溉法制定了各作物的节水型灌溉制度,用这种方法制定的节水型灌溉制度要比我国过去用的常规法节水40%以上。     

Determining crop-water production functions using yield–irrigation gradient algorithms

Crop-water production functions (CWPFs) are a useful tool for irrigation planning, but derivation of CWPFs by field experimentation is expensive, and traditional analytical techniques are not well suited to derivation of CWPFs. Physiologically based crop models provide a useful tool for simulation of agricultural experiments, but they have not been extensively applied to the task of CWPF determination. A new algorithm type based upon differential crop yield response to irrigation (“yield–irrigation gradients” [YIG]) is presented that uses these crop models to determine planning-level irrigation schedules and CWPFs. Three specific algorithms are developed within this type, varying in complexity, performance, and computational costs. Performance of the YIG methods is compared against a standard reference evapotranspiration method. In particular, the randomized iterative YIG (RIYIG) algorithm provides near-optimal results but at the highest computational costs of all the methods specified. All of the techniques presented have general applicability and are not limited to any one crop or location.