Influence of death struggle on the structural changes in chub mackerel muscle during chilled storage

ABSTRACT: Chub mackerel (34–35 cm, approximately 500 g), which were caught by fishing with a rod and line at the Bungo Channel, Oita prefecture, were rested overnight in a fish preserve and either killed by decapitation (control group) or allowed to struggle in air for 30 min (struggled group). Muscle samples were excised every 4 h, and measurements on breaking strength and histological observations were done for both groups. The breaking strength of muscle in the control group was significantly higher than that in the struggled group, whereby a decrease in breaking strength was delayed for 12 h compared to the struggled group. Light microscopy showed space extension among muscle cells in association with a decrease in breaking strength. Especially in the struggled group, the extended area was larger and the difference in area was significant at the time when breaking strength showed a significant difference. Using electron microscopy, the extended area showed cut and/or disappeared collagen fibrils. From these results, it was demonstrated that struggling to death promoted the degradation of collagen fibrils and the weakening of connective tissue and, resultantly, led to the faster softening of muscle of chub mackerel.     

Application of acoustic Doppler current profiler combined with a scientific echo sounder for krill Euphausia pacifica density estimation

ABSTRACT:   An application of the acoustic Doppler current profiler (ADCP, 153.6 kHz) in combination with a scientific echo sounder (EK60, 38 and 200 kHz) was investigated to estimate the density of krill Euphausia pacifica . The acoustic backscattering strength from sound scattering layers was compared with biomass estimates from midwater trawls. Euphausia pacifica was targeted among mixed species populations in the sound scattering layer in the offshore Funka Bay area of Hokkaido, Japan. The frequency characteristics of acoustic backscattering by krill were calculated using a distorted wave Born approximation scattering model at three frequencies. Krill aggregations identified from the EK60 data were extracted as the mean volume backscattering strength difference between two frequencies. They were then used to identify similar aggregations in the ADCP data by matching observation times and depths for the two methods, which were applied simultaneously. Results from the comparison of the mean volume backscattering strength and the density calculated from the ADCP and EK60 showed that ADCP can be used to measure density and spatial–temporal distribution of krill aggregations. Current speed and direction at the study site were found to be 16.1 cm/s and 187.0°, respectively, and krill speed and direction (including the current component) were found to be 19.8 cm/s and 172.2°, respectively. Based on the ADCP data, the net speed and direction of the krill aggregations were found to be 5.9 cm/s and 128.0°, respectively.     

Evaluation of Five Most Commonly Grown Cotton Cultivars (Gossypium hirsutum L.) Under Mediterranean Conditions: Productivity and Fibre Quality

Studies were conducted in four regions of central Greece (Larisa, Karditsa, Livadia, Thiva), to evaluate the productivity and fibre properties (fibre strength and fibre length) of the five most commonly grown cotton cultivars in these regions. The experiments lasted for 6 years (1995–2000). All the characteristics tested were strongly influenced by the factors ‘year’, ‘cultivar’ and ‘region’. Significant cultivar × region, year × cultivar, region × year and cultivar × region × year interactions occurred for all the characteristics studied. The cultivar Alegria had the highest seed‐cotton and lint yield, while Aria had the lowest ones. Both cultivars gave the highest mean lint percentage but the lowest mean boll weight (MBW). Alegria had the lowest fibre strength, while Aria had the highest. The Acala‐type cultivars, Acala SJ2 and Zeta 2, had intermediate seed‐cotton and lint yield, while Vered 171 had high seed‐cotton and satisfactory lint yield. The three cultivars mentioned above had the highest MBW and very good fibre strength. Positive correlation was observed between fibre strength and length. In spite of the fact that mean fibre length was statistically the same in all cultivars, it was influenced by the factor ‘year’, as a result of different weather conditions. The year 1996 was the most unfavourable one for seed‐cotton yield and MBW, because it was characterized by lower than average air temperatures and rather dry conditions for all study sites. The factor ‘region’, a combination of different climatic conditions and cultural practices, influenced significantly all the parameters studied.     

室内型胶合板天然耐久性的初步研究

作为一项反映材料优劣的重要的评价指标,天然耐久性直接决定了材料的使用寿命.笔者通过对胶合板胶合强度性能连续14年的跟踪测定,讨论和分析了胶合板的天然耐久性.最后总结出了胶合板在使用过程中随时间迁移其胶合强度性能随外界变化的规律,以期为胶合板的生产制备、生产工艺的改进及其应用领域的拓宽等方面起到一定的指导作用.     

川西粉质黏土-衬砌接触面冻结强度规律研究

为揭示川西灌渠粉质黏土-衬砌接触面间冻结强度规律,针对川西地区灌渠渠基土开展了冻结作用下冻结温度、冻结时间、初始含水率、法向荷载4种影响因素在不同条件下的剪切试验.结果 表明:接触面间峰值抗剪强度与冻结温度、初始含水率变化呈负相关,与冻结时间、法向荷载变化呈正相关.此外,利用正交分析,揭示了4种因素对峰值抗剪强度影响的...     

中蜂越夏及秋季繁殖试验

在贵州锦屏进行的中蜂越夏及秋繁试验表明，４框以上的群势越夏较为安全。越夏期间每框足蜂约需补喂白糖１．５公斤。越夏后，蜂群群势约下降１／３左右。蜂群在越夏期间飞逃的主要原因是缺蜜及巢虫危害。当地中蜂在秋季大流蜜初期发生分蜂，分蜂群势均为８框足蜂以上，７框左右不分群。为控制不同起繁群势的蜂群在秋季大流蜜初期正好繁殖到７框左右，不致因分蜂影响秋冬蜜的采集，应分期起步秋繁。根据本试验所建秋季起繁群势（ｘ）与达７框群势所需繁殖天数（ｙ）之间的回归直线方程推算，在起繁群势为１～５框蜂量时，最适的秋繁开始期，１框群为７月３１日，２框群８月１０日……蜂群的基础群势每增加一框，则秋繁开始期应相应推迟１０～１１天。     

不同日粮组成对蛋鸡生产性能及鸡蛋品质的影响

选用５７６只１５４日龄海赛克斯蛋鸡探讨不同日粮组成对蛋鸡生产性能及鸡蛋品质的影响。共计３个处理，每个处理４个重复，每个重复４８只鸡，全阶梯三层笼养，自由采食、饮水，进行产蛋率大于８０％的饲养试验。试验期为４周。试验结束后，对各处理的产蛋率、只日产蛋量、料蛋比、破蛋率、每千克蛋耗料成本及蛋的品质指标进行统计分析。试验结果表明，采食３种日粮的试鸡在产蛋量、破蛋率、采食量等指标差异不显著（Ｐ＞０．０５），但采食无鱼粉日粮的试鸡料蛋比、死淘率最低，每千克蛋饲料成本最低（Ｐ＜０．０５），且产蛋率最高（Ｐ＜０．０５）。蛋形指数、蛋壳厚度、蛋壳强度、哈氏单位４项指标上３个处理间无明显差异（Ｐ＞０．０５）。     

Wolf公式在乳品礼盒箱结构设计中的应用

为研究Wolf公式在乳品礼盒箱结构设计中的应用,以350 mL莫斯利安为例,根据内装物的数量、排列方式预设计5种礼盒箱,依据Wolf公式对各规格礼盒箱进行理论抗压计算,并运用抗压公式对相同贮存环境中、堆码10层的条件下计算礼盒箱最低应达到的抗压值,综合长宽比、周边长等礼盒结构设计元素对二者的结果进行了比较和分析研究,同时对礼盒箱进行抗压实验验证,进而得出最适合350 mL莫斯利安结构设计的礼盒箱.结果表明:350 mI礼盒箱在纸箱材质、高度一致的条件下,排列为3×3、长宽比为1、周边长为74 mm时,礼盒箱4的抗压强度提供的市场价值最优.