12份燕麦品种在阿鲁科尔沁旗地区的生产性能研究

【目的】筛选适宜内蒙阿鲁科尔沁旗地区种植的燕麦品种。【方法】对12份燕麦(Avena sativa)品种的生育期、草产量、茎叶比、营养特性等进行测定和分析,并运用灰色关联度分析法对各品种的生产性能进行综合评价。【结果】12份供试燕麦品种均能在阿鲁科尔沁旗地区完成整个生育期,表现出较好的适应性,生育期为83～94 d,其中枪手的生育期最短(83 d),爱沃的生育期最长(94 d)。贝勒二代和牧王的株高均达到100 cm以上。枪手、贝勒二代和牧王的干草产量较高,分别为9.99,8.69和8.59 t/hm~2。贝勒二代的茎叶比最低(1.12),适口性最好;美达的茎叶比最高(3.19)。爱沃和贝勒二代的粗蛋白含量(质量分数)较高,分别为12.20%和11.90%;太阳神、贝勒二代和领袖的中性洗涤纤维及酸性洗涤纤维含量较低,领袖和贝勒二代的相对饲喂价值较高。灰色关联度分析表明,综合评价排在前2位的燕麦品种为贝勒二代和牧王,其加权关联度分别为0.838 2和0.799 1。【结论】燕麦品种贝勒二代和牧王综合表现最好,适宜在阿鲁科尔沁旗地区推广种植。     

海水中规模化培养西藏拟溞的技术优化研究

为了给北方海水鱼虾蟹类育苗增添一种新的生物活饵料,利用循环水培养装置研究了西藏拟溞Daphniopsis tibetana Sars在稀释海水(盐度为18~20)中规模化培养的技术工艺参数,即起始放养密度、充纯氧和日采收率。结果表明:起始放养密度对西藏拟溞种群增长和日产量影响显著(P0.05),不同起始放养密度(200、550、900、1250 ind./L)培养试验中,放养密度为1250ind./L时,培养第33天时种群密度达最高,为(9500±550.73)ind./L,平均日产量为(125.00±8.35)g/(m3·d);充纯氧与充空气相比较,充纯氧能显著提高种群密度和日产量(P0.05),当放养密度为1250 ind./L、充纯氧时,西藏拟溞种群密度最高达(11 600±560.45)ind./L,平均日产量为(156.82±8.49)g/(m3·d);日采收率对西藏拟溞的种群增长和日产量也有显著影响(P0.05),日采收率为20%时最佳,放养密度为1250ind./L、日采收率为20%时,西藏拟溞种群密度最高为(12 900±995.04)ind./L,平均日产量为(176.52±15.08)g/(m3·d)。     

浅谈林业生产中的造林及抚育技术

在林业生产的过程中,采用正确、合理的造林技术和抚育技术,能够提高造林成活率,确保林木健康生长,并在短时间内构建完善的林分结构。而科学的抚育管理,又能进一步挖掘林业发展潜力,提升林地质量和产量,为林业发展创造更多的空间。同时做好造林和森林抚育工作,能够有效地促进林业科学发展,更好地应对全球气候变化的挑战。     

木工平刨床安全事故浅析

以木工平刨伤手为顶上事件,利用事故树法进行评价,提出有针对性的预防措施,对安全生产可起到积极的作用。     

产甲壳素酶菌株的筛选与诱变

以胶体甲壳素作为惟一碳源,从自然界微生物中筛选并诱导到一株产甲壳素酶活性较高的菌株,经16S r DNA鉴定为Aeromonas sp.。并以该菌株作为出发菌株,经过一次紫外诱变,酶活是初筛菌株的1.48倍。再经过二次紫外诱变或者紫外-Li Cl复合诱变,酶活分别是初筛菌株的3.16和3.87倍,最高酶活达到3.48 U/m L。最后通过连续传代培养,确定了菌株HMX-16经过紫外和复合诱变后突变性状稳定性良好。     

不同产量潜力甘薯光合产物的生产、运转与块根产量的关系

选取中国主栽的食用型甘薯品种龙薯9号、红香蕉、泰中6号、苏薯8号、遗字138和北京553进行大田试验,研究不同产量潜力甘薯品种光合产物的生产、运转及其与块根产量的关系。结果表明,高产品种整个生育期干物质积累快,光合产物向块根输送多,同化物在块根中的分配率较高,而且高产品种的标记叶合成的光合产物能够较多地运出。因此,叶片光合作用形成的光合产物能够及时地往外运输,是高产甘薯品种高产的重要保证。高产品种具有较高的经济系数。     

Dense planting with less basal nitrogen fertilization might benefit rice cropping for high yield with less environmental impacts

Dense planting and less basal nitrogen (N) fertilization have been recommended to further increase rice (Oryza sativa L.) grain yield and N use efficiency (NUE), respectively. The objective of this study was to evaluate the integrative impacts of dense planting with reduced basal N application (DR) on rice yield, NUE and greenhouse gas (GHG) emissions. Field experiments with one conventional sparse planting (CK) and four treatments of dense planting (increased seedlings per hill) with less basal N application were conducted in northeast China from 2012 to 2013. In addition, a two-factor experiment was conducted to isolate the effect of planting density and basal N rate on CH₄ emission in 2013. Our results show that an increase in planting density by about 50% with a correspondingly reduction in basal N rate by about 30% (DR1 and DR2) enhanced NUE by 14.3–50.6% and rice grain yield by 0.5–7.4% over CK. Meanwhile, DR1 and DR2 reduced GWP by 6.4–12.6% and yield-scaled GWP by 7.0–17.0% over CK. According to the two-factor experiment, soil CH₄ production and oxidation and CH₄ emission were not affected by planting density. However, reduced basal N rate decreased CH₄ emission due to it significantly reduced soil CH₄ production with a smaller reduction in soil CH₄ oxidation. The above results indicate that moderate dense planting with less basal N application might be an environment friendly mode for rice cropping for high yield and NUE with less GHG emissions.     

花生副产物在畜牧生产中的综合利用

花生在生产过程中产生大量副产物,其营养价值较高,是重要的饲料加工原料。文章主要针对花生生产过程中副产物营养价值及在畜牧生产中的利用进行综述。     

2种胃膜素制备方法的比较

[目的]比较分析制备胃膜素的2种方法，优化制备方法，为工业化规模生产提供试验依据。[方法]以猪胃黏膜为材料，采用单产工艺和联产工艺提取胃膜素，比较分析2种制备方法所得胃膜素的性状、得率、总氮含量和还原性物质含量的差异。[结果]2种方法提取的胃膜素在黏度、酸度、干燥失重和炽灼残渣等方面差异不大，总氮含量和还原性物质含量也无明显差异，均符合国家标准。单产工艺胃膜素得率较高，平均达3．5％，联产工艺得率偏低，仅有1．7％，但联产工艺可以得到副产品胃蛋白酶。[结论]单产工艺的得率高于联产工艺，联产工艺可以同时得到副产品。     

Efficient reduction of biomass,seed and season long pollen production of common ragweed (Ambrosia artemisiifolia L.)

Ragweed (Ambrosia artemisiifolia L.) is a noxious plant that not only is a troublesome agronomic weed that causes economic damage to agricultural crops but also − and even more importantly − causes severe health problems due to its severe allergenicity. The pollen of invasive ragweed has become a major allergenic risk factor in urban areas in newly occupied regions. Many urban areas prohibit herbicide application; thus, mowing is the most widely used control measure. Counting pollen is labour intensive; therefore, pollen production data are mainly based on estimations. Field experiments were conducted to determine the effects of different mowing scenarios, plant density and cutting height on the biomass, pollen production and seed production of common ragweed plants. Ragweed plants were mown twice: just before the flowering of terminal racemes (BBCH 59) and when the flowers of the re-sprouting lateral shoots reached BBCH 59. A 1- to 3-cm cutting height produced the greatest pollen reduction compared to that of intact control plants (94%) based on a season-long pollen collection. The number of female flowers also significantly decreased (97%). Compared to the control, the onset of pollen discharge was delayed by 5 weeks and the length of the pollen discharge period decreased from 9 to 4 weeks. The season-long unique and reproducible pollen production data can be integrated with airborne pollen modelling and population management strategies.