新扬州鸡IGF-1基因多态性与早期生长速度关系的研究

以150只非同胞新扬州鸡为材料，采用PCR—RFLP法检测了该基因5’调控区DNA序列多态性，并运用线性模型统计方法分析了多态性与初生重和12周龄体重的关系。结果显示：新扬州鸡IGF-1基因5、调控区自然存在两种不同DNA序列，经。PstⅠ酶切后出现3种基因型(“-／-”、“-／ ”、“ ／ ”)，基因型分布符合哈代一温伯格定律。各基因型个体的初生重、12周龄体重的最小二乘均数存在“-／-”＞“ ／-”＞“ ／ ”的趋势，且“-／-”型个体的12周龄体重显著高于“ ／ ”型个体(P＜0．05)。     

美系杜洛克种猪体尺、体重测定与体型评定研究

统计分析了2001年引进的新美系杜洛克种猪及繁殖后代在6月龄、12月龄、24月龄和36月龄四个阶段的体尺、体重数据，结合品种特征、体型外貌总结研究出杜洛克种猪的百分制评分及等级标准。     

Changes in technical efficiency of the broiler production in Poland, 1994–2013

1. The effects of changes in technical efficiency on the increase of broiler production are presented for the period 1994–2013 based on the panel data from seven farms located in southern and central Poland. A total of 766 cycles were analysed.

2. The Cobb–Douglas production function was used to assess the changes of output elasticities as well as technical changes in broiler production, for 5-year sub-periods separately.

3. Technical indices of broiler production significantly improved between years 1994–2013: feed conversion ratio decreased from 2.50 kg/kg to 1.78 kg/kg, mortality rate from 8.8% to 4.0% and daily weight gain increased from 37.1 g/d to 58.7 g/d, respectively.

4. Before accession to the EU, there was a substantial increase of fixed capital connected with modernisation of buildings and equipment. In the period 1994–2013, inputs of fixed capital per kilogram of livestock increased by 72% and at the same time the input of labour decreased by 56%.

5. Technical changes in years 1994–1998 contributed to a rapid production increase at a rate of 4.6% annually and only by up to 0.7% annually during 2009–2013. The slowdown of production rate increase after 2009 was partially caused by decreasing the stocking density.     

Multimarker and rare variants genomewide association studies for bone weight in Simmental cattle

Bone weight, defined as the total weight of the bones in all the forequarter and hindquarter joints, can reflect somebody conformation traits and skeletal diseases. To gain a better understanding of the genetic determinants of bone weight, we used a composite strategy including multimarker and rare‐marker association to perform genomewide association studies (GWAS) for that character in Simmental cattle. Our strategy consisted of three models: (i) A traditional linear mixed model (LMM) was applied (Q+K‐LMM); (ii) single nucleotide polymorphisms (SNPs) with p‐values less than .05 from the LMM were selected to undergo the least absolute shrinkage and selector operator (Lasso) in the second stage (LMM‐Lasso); (iii) genes containing two or more rare SNPs were examined by performing the sequence kernel association test (gene‐based SKAT). A total of 1,225 cattle were genotyped with an Illumina BovineHD BeadChip containing 770,000 SNPs. After the quality‐control procedures, 1,217 individuals with 608,696 common SNPs and 105,787 rare SNPs (with 0.001 < minor allele frequency [MAF] <0.05) remained in the sample for analysis. A traditional LMM successfully mapped three genes associated with bone weight, while LMM‐Lasso identified nine genes, which included all genes found by traditional LMM. Only a single gene, EPHB3, surpassed the significance threshold after Bonferroni correction in gene‐based SKAT. In conclusion, based on functional annotation and results from previous endeavours, we believe that LCORL, RIMS2, LAP3, PRKAR2B, CHSY1, MAP2K6 and EPHB3 are candidate genes for bone weight. In general, such a comprehensive strategy for GWAS may be useful for researchers seeking to probe the full genetic architecture underlying economic traits in livestock.     

河南卫河流域脆弱性评价

结合卫河自身特点和地理环境建立13项指标体系,运用基于熵权的模糊数学模型对其脆弱性进行评价。结果表明,鹤壁的脆弱性为0.69,焦作为0.55,新乡为0.39,安阳为0.36,濮阳为0.23。最后针对评价结果分析了原因,提出了合理性建议和措施。     

基于案例推理的产品质量安全风险评估研究

为了建立健全产品质量安全风险管理体系，加强产品质量安全风险预警的要求，同时最大程度地利用过去成功的风险评估案例，构建了基于案例推理的产品质量安全风险评估系统。针对某种产品，根据专家的知识建立风险评估指标体系，并将每个评估指标赋权重，计算与案例库中的各个案例相似度，寻找出最大相似度案例，据此，辅助相关人员对目标案例进行风险分析与评估。     

基于相对熵排序的建筑工程项目投标决策

投标决策是施工企业面对的重要问题．在建筑工程项目投标问题上，先建立风险指标体系，再结合层次分析法和信息熵法求得风险指标的综合权重，然后借助相对熵排序法，对各个方案进行综合评价，得到有效反映各方案差异的评价模型，通过对比可知此法可行有效，且灵敏度高．     

铜仁烤烟单叶重现状与提升烟叶质量对策

根据铜仁烤烟单叶重的调查数据，认真梳理了铜仁烤烟单叶重的现状，分析了铜仁烤烟单叶重存在的问题，从烟叶收购政策和烟叶生产技术两个方面有针对性的提出提升铜仁烟叶质量的对策，为铜仁烤烟产业的持续健康发展提供理论指导。     

茶树小分子量热激蛋白基因CsHSP17.2的克隆与表达分析

[目的]进一步了解茶树小分子量热激蛋白基因CsHSP17.2在逆境胁迫条件下的分子生物学功能.[方法]利用RT-PCR技术从茶树‘迎霜’中克隆得到CsHSP1 7.2基因,运用生物信息学软件分析其核苷酸和编码蛋白,通过Real-timePCR分析其表达模式.[结果]该基因开放阅读框长度为453 bp,编码150个氨基酸,蛋白质相对分子质量为17.2×10a,理论等电点5.56;无信号肽位点,属于非分泌型蛋白;被定位于细胞质中.系统发育树分析表明,茶树CsHSP1 7.2与水稻(GenBank登录号:P27777)和花生(ABC41131)的进化关系较近,属于小分子量热激蛋白基因家族第Ⅰ亚族.qRT-PCR分析发现,茶树CsHSP17.2属于组成型基因;高温(38℃)处理1h能显著提高CsHSP17.2 mRNA的相对表达量(P＜0.05);干旱(100 g·L-1 PEG 6000)、高盐(200 mmol· L-1 NaCl)和外源脱落酸(200 mg· L-1 ABA)处理条件下,该基因的转录水平均出现不同程度的上调.[结论]克隆得到茶树‘迎霜’小分子量热激蛋白基因CsHSP17.2,其在花中表达量最高,且响应高温、干旱、高盐和外源脱落酸胁迫.