基于云计算技术和3D渲染的农机虚拟制造技术研究

为了提高农机现代化和批量化生产效率,实现基于个性化需求农机设计和制造,提出了面向机加工的云技术农机制造服务候选资源的发现方法,并设计了农机虚拟制造的云计算平台。在农机部件云制造虚拟平台中,首先利用云存储技术存放大量的候选制造企业资源样本数据,然后利用智能分类算法KNN对候选资源进行分类,根据农机部件制造需求的客户对候选资源进行优选,最后得到最佳的候选资源。基于云计算和3D渲染技术,构建了面向工序级和零件级服务的仿真环境,并通过仿真实验,得到了优选后服务方的服务时间、费用和合格率,为现代农机的批量生产和个性化加工服务提供了新的解决方案。     

花前氮亏缺对水稻叶片氮代谢酶活性的影响

以籼型杂交稻中浙优1号和籼粳型杂交稻甬优12为材料,试验分析了花前不同时期氮亏缺处理对水稻叶片氮代谢酶活性的影响。结果表明,花前氮亏缺导致植株上3叶氮浓度、NR、GS、GOGAT、GOT和GPT酶活性大幅下降,GDH活性显著增长,且各叶位对花前氮亏缺敏感度总体上表现为剑叶倒2叶倒3叶;破口期亏氮对籼型杂交稻中浙优1号上3叶氮同化酶活性的影响远小于减数分裂期处理,与之相比,籼粳杂交稻甬优12对破口期亏氮胁迫仍较敏感,表明中浙优1号植株氮代谢酶的亏氮敏感性由减数分裂期至破口期逐步下降,对土壤速效氮的需求同步降低,甬优12则对土壤供氮存在更高需求。     

Development of a kompetitive allele‐specific PCR marker for selection of the mutated Wx‐D1d allele in wheat breeding

Waxy (Wx) protein is a key enzyme for synthesis of amylose in endosperm. Amylose content in wheat grain influences the quality of end‐use products. Seven alleles have been described at the Wx‐D1 locus, but only two of them (Wx‐D1b, Wx‐D1e) were genotyped with codominant markers. The waxy wheat line K107Wx1 developed by treating ‘Kanto 107’ seeds with ethyl methanesulphonate carries the Wx‐D1d allele. However, no molecular basis supports this nomenclature. In the present study, DNA sequence analysis confirmed that a single nucleotide polymorphism in the sixth exon of Wx‐D1 changed tryptophan at position 301 into a termination codon. Based on this sequence variation, a PCR‐based KASP marker was developed to detect this point mutation using 68 BC₈F₁ plants and 297 BC₈F₂ lines derived from the cross ‘Ningmai 14’*9/K107Wx1. Combined with codominant markers for the Wx‐A1 and Wx‐B1 alleles, waxy and non‐waxy near‐isogenic lines were distinguished. The KASP marker was efficient in identifying the mutant allele and can be used to transfer waxiness to elite lines.     

Molecular mapping of soybean seed tocopherols in the cross ‘OAC Bayfield’ × ‘OAC Shire’

Soybean (Glycine max [L.] Merr.) is cultivated primarily for its protein and oil in the seed. In addition, soybean seeds contain nutraceutical compounds such as tocopherols (vitamin E), which are powerful antioxidants with health benefits. The objective of this study was to identify molecular markers linked to quantitative trait loci (QTL) that affect accumulation of soybean seed tocopherols. A recombinant inbred line (RIL) population derived from the cross ‘OAC Bayfield’ × ‘OAC Shire’ was grown in three locations over 2 years. A total of 151 SSR markers were polymorphic of which a one‐way analysis of variance identified 42 markers whereas composite interval mapping identified 26 markers linked to tocopherol QTL across 17 chromosomes. Individual QTL explained from 7% to 42% of the total phenotypic variation. Significant two‐locus epistatic interactions were identified for a total of 122 combinations in 2009 and 152 in 2010. The multiple‐locus models explained 18.4–72.2% of the total phenotypic variation. The reported QTL may be used in marker‐assisted selection (MAS) to develop high tocopherol soybean cultivars.     

便携式木材绞盘机新型卷筒离合器设计

在利用便携式木材绞盘机进行木材生产试验过程中,发现卷筒离合器在分离与接合过程中易出现卡阻现象,从而影响集材生产效率。在对牙嵌式离合器结构进行受力分析和卡阻原因分析的基础上,基于Solid Works的建模分析设计方法,设计了一种新型多孔旋转圆柱式卷筒离合器,该方法有效缩短了新型卷筒离合器的设计周期。新型卷筒离合器采用圆柱销与圆孔的嵌合,代替牙嵌式离合器牙嵌轴与牙嵌套的嵌合,同等试验条件下,旋转柱销式卷筒离合器平均分离时间分别比柱销式卷筒离合器节省3.71 s、比牙嵌式卷筒离合器节省8 s,改善了便携式木材绞盘机卡阻后离合器分离困难的现象,节约了离合器分离时间,从而有效提高了便携式木材绞盘机在集材作业中的生产效率。     

施氮量和采收时期对油蔬两用型油菜菜薹维生素合成的影响

为明确施氮量和采收时期对油蔬两用型油菜薹维生素含量的影响,以富硒1号为材料,采用裂区试验设计,设置3个施氮量(120、180和240 kg·hm^-2)和4个采收时期(以株高20、30、40和50 cm表示),分析了油菜薹维生素C、维生素E、维生素B₁和维生素B₆含量的变化;比较了半乳糖内酯脱氢酶(GalLDH)、抗坏血酸氧化酶(AAO)、抗坏血酸过氧化物酶(APX)、脱氢抗坏血酸还原酶(DHAR)和单脱氢抗坏血酸还原酶(MDHAR)活性,并分析了维生素家族基因在菜薹中的表达量。结果表明,随着施氮量的增加,油菜薹还原型维生素C(AsA)含量降低;氧化型维生素C(DHA)含量在株高20 cm采收时增加,但在30 cm及以上株高采收时则降低;维生素E和维生素B₆含量先增加后降低;维生素B₁含量增加;维生素C合成关键酶GalLDH活性先略增加后降低;AAO和DHAR活性增加,APX和MDHAR活性则整体表现为先增加后降低。且施氮量增加后,维生素家族各基因在株高30和40 cm采收的菜薹中主要表现为正向调控,而在株高20和50 cm采收的菜薹中主要表现为负向调控。就采收时期而言,菜薹中的维生素含量在株高30~40 cm时高于其他时期;在同一施氮量下,随着菜薹采收株高的增加,维生素家族基因的表达量主要呈上调模式。综合分析可知,GalLDH活性的降低以及AAO/DHAR和APX/MDHAR代谢平衡是增施氮肥导致菜薹维生素C含量降低的重要原因。本研究结果为油蔬两用型油菜薹优质栽培技术提供了理论依据。     

Agronomic traits at the seedling stage,yield, and fiber quality in two cotton (Gossypium hirsutum L.) cultivars in response to phosphorus deficiency

ABSTRACT

Cotton is critical for phosphorus demands and very sensitive for its deficiency. However, identifying the effect of low-phosphorus tolerance on cotton growth, yield, and fiber quality by reducing phosphorus consumption. This may help to develop phosphorus-tolerant high-yielding cotton cultivars. In a two-year repeated (2015 and 2016) hydroponic experiment (using 0.01 and 1 mM KH₂PO₄), two cotton cultivars with phosphorus sensitivity (Lu 54; a low-phosphorus sensitive and Yuzaomian 9110; a low-phosphorus tolerant) were screened on the base of agronomic traits and physiological indices through correlation analysis, cluster analysis and principal component analysis from 16 cotton cultivars. Low phosphorus nutrition reduced the plant height, leaf number, leaf area, phosphorus accumulation and biomass in various organs of seedlings. The deficiency negatively affected the morphogenesis of seedlings, as well as yield and fiber quality. Further, these screened cultivars were tested in a pot experiment with 0, 50, 100, 150, 200 kg P₂O₅ ha^?1 during 2016 and 2017. It was found to have a significant (P< 0.05) difference in boll number, lint yield, fiber strength, and micronaire at the harvest. Furthermore, after collectively analyzed the characteristics of Lu 54 and Yuzaomian 9110, there were six key indices that could improve the low phosphorus tolerance of cotton cultivars. These were root phosphorus accumulation, stem phosphorus accumulation percentage, leaf and total biomass of seedlings, seed cotton weight per boll and fiber length.     

不同因素影响下层状土壤水分入渗特征及水力学参数估计

层状土壤是自然界常见的土体结构,其水分运移规律不同于均质土;大气降水、灌溉水等水分的入渗是土壤水文过程的一个重要环节,同时它也与地下水补给、污染物运移等过程紧密相关。土壤初始含水量、土体构型及供水强度等因素均会影响水分的入渗过程。为探究积水深度、土体构型、初始含水量三种因素对层状土壤水分运移的影响,通过室内积水入渗试验对湿润锋、累积入渗量、土壤剖面压力水头进行观测,并利用Hydrus-1D模型反演水力参数并对相应条件下的水分运移规律进行模拟和分析。结果表明,层状土壤中湿润锋随时间的推进方式由非线性过渡至线性,入渗率逐渐减小。三种因素作用下,层状土壤水分运移特征有明显差异:积水深度、土壤初始含水量增加时,湿润锋运移速率和入渗率均增大,且各观测点压力水头升高加快,土壤不饱和程度降低;上砂壤下粉砂壤构型较上粉砂壤下砂壤构型而言,整体湿润锋推进速率和入渗率较大,出流快,且入渗后期界面处的压力水头高于其他观测点。且结果表明,反演的水力学参数较拟合实测的参数更适用于层状土壤入渗的模拟和预测。该研究旨在揭示和掌握层状土壤水分运移规律和影响因素的作用机制,并进一步为农田灌溉措施的合理制定提供科学依据。     

缺硼条件下两种不同砧木“纽荷尔”脐橙矿质元素含量变化的比较

采用溶液培养试验,研究了缺硼对两种不同砧木纽荷尔脐橙硼、锌、钙、镁和钾元素含量变化。结果表明,缺硼显著降低了枳壳砧木纽荷尔脐橙体内硼含量而对锌含量影响不大; 相反,缺硼对枳橙砧木脐橙体内硼含量的影响不是很大,而显著降低了其叶片中锌的含量。这可能是缺硼条件下枳壳砧木脐橙容易出现缺硼症状,而枳橙砧木脐橙容易出现缺锌症状的原因之一。与对照相比,缺硼处理的枳壳砧木脐橙叶的钙含量明显增加; 而根的钾含量明显高于枳橙砧木橙根。这些结果与枳壳砧木脐橙对硼更敏感有一定的关系。缺硼对镁含量的影响两种砧木间基本没有差异。     

养分缺乏下外源有机酸对暗棕壤磷有效性及落叶松幼苗吸收积累磷的影响

用不同比例A1和B层暗棕壤混合(A1∶B=1∶2)制造土壤养分缺乏条件,栽植落叶松幼苗,通过模拟我国东北林区代表性森林凋落物淋洗液中有机酸的种类和数量,系统研究养分缺乏下,不同浓度外源有机酸对暗棕壤磷有效性和落叶松幼苗吸收、运输磷素养分的影响及机理,以探讨利用有机酸提高养分缺乏下落叶松幼苗抗土壤贫瘠能力的可行性及机制。结果表明,A1层与B层混合土壤速效磷含量降低,落叶松幼苗根系和叶片磷累积量和磷吸收效率降低,但磷利用效率增加。外源有机酸处理后,混合土壤的速效磷含量有不同程度提高,3种有机酸的作用强弱表现为琥珀酸>柠檬酸>草酸,一般以浓度5.0mmol/L和处理20d时提高效果最显著。有机酸不同程度提高了根系和叶片的磷累积量和磷吸收效率,但降低了磷利用效率。有机酸对磷累积量和磷吸收效率的提高程度因处理时间、有机酸浓度和种类而异:对于根系,20d和30d的结果高于10d,叶片则为10d和20d的结果高于30d,说明处理前期磷被吸收后向叶片的转移量较多,而后期则更多地在根中积累;3种有机酸大多在浓度为10.0mmol/L时提高幅度最大;不同有机酸的促进程度为琥珀酸>柠檬酸>草酸。因此,外源有机酸能通过提高落叶松幼苗对养分缺乏土壤中磷的吸收能力,促进磷的积累,进而提高苗木对养分缺乏土壤的耐性和适应能力。