中华卵索线虫人工室内培养技术

为室内大量繁殖中华卵索线虫Ovomermis sinensis,采用个体由大到小的斜纹夜蛾Spodoptera litura、棉铃虫Helicoverpa armigera和黏虫Mythimna separata作为宿主,测定被中华卵索线虫寄生后3种宿主的体长和体重,研究宿主种类对中华卵索线虫有效率、雌雄比和体长的影响以及寄生强度对线虫雌雄比的影响。结果显示,被中华卵索线虫寄生后,斜纹夜蛾、棉铃虫和黏虫生长减缓。在相同感染比例下（除宿主与线虫比为1∶15外）,3种宿主的线虫有效率之间差异不显著。当寄生强度为5时,3种宿主体内脱出的中华卵索线虫均为雌线虫;当寄生强度从10增到40时,斜纹夜蛾、棉铃虫和黏虫所脱出的雌性比分别由100.0%、90.0%、83.9%降为0;相同寄生强度下,从斜纹夜蛾体内脱出的雌性比显著高于从棉铃虫与黏虫体内脱出的雌性比。斜纹夜蛾、棉铃虫和黏虫体内脱出雌线虫和雄线虫平均体长分别为14.8、13.8、12.8 cm和8.0、7.5和7.5 cm。当中华卵索线虫与宿主按照比例20∶1～25∶1侵染斜纹夜蛾、按照15∶1侵染棉铃虫和黏虫时,能获得线虫最适雌雄比（1∶1...     

Chronic tuberculosis caused by Mycobacterium bovis in a domestic donkey in Central Europe

Bovine tuberculosis is a contagious and zoonotic disease of animals and humans. In Europe, the number of reported cases of tuberculosis has decreased. Equidae are relatively rarely infected even in endemic areas. The presented report describes a case of chronic Mycobacterium bovis tuberculosis in a 30-year-old female donkey. The donkey initially presented with persistent lymphadenopathy; however, as the disease progressed, weight loss became apparent. To the authors' knowledge, this is the second confirmed case of tuberculosis in a donkey in Europe.     

A Study of the Vertical Vibration of the 4200 Thick Plate Rolling Mills

In this paper,the mill stand and the rolled piece were studied as a system. Based on the disoreted masses and the deformation of bending curve of the roller and roll housing, according to Rayleigh method,the equivalent mass and and the equivalent stiffness of the mode were solved,and set up a multiple degree of freedom vibration dynamic model. And also did theoretical analysis and calculation with an exapmle of the 4200 thick plate rolling mills.     

A Globally Convergent Algorithm for Nonlinear Programming

A new globally convergent algorithm was presented for a continuous differen-tiable nonlinear programming by defining a measure function deviating from the Kuhn-Tucker point. With this algorithm which can be used to get the optimum solution of the problem,the optimal lagrangian multiplier corresponding the optimal solution of the problem was also obtained. A new iterative algorithm for quadratic programming is obtained when applying the general algorithm to quadratic programming. Finally,a numerical example was given.     

直墙拱形巷道围岩应力场分析

为得出直墙拱形巷道围岩应力分布规律,应用复变函数弹性理论推导了直墙拱形巷道围岩应力分布的解析表达式。对直墙拱形巷道边界的围岩应力和巷道水平线方向的围岩应力分布规律进行分析,并考虑直墙拱形巷道断面高宽比和侧压系数对其影响规律。研究表明：在不同巷道断面高宽比、侧压系数下,直墙拱形巷道围岩应力集中区域主要集中在直墙底部底角处、拱形顶板中点附近和底板中部3个位置。不同巷道断面高宽比下,直墙拱形巷道沿水平线的应力分布规律基本相同。侧压系数大于1时,采用巷道断面高宽比小于1较有利于巷道稳定;侧压系数小于等于1时,采用巷道断面高宽比大于1较有利于巷道稳定。     

棉花冠层叶面积的动态模拟

根据试验资料,在系统分析棉花冠层叶面积时空分布规律的基础上,充分考虑叶面积空间垂直分布的异质性,以生育期内累积的每日相对热效应为预报因子,构建了棉花叶面积垂直分布和叶面积指数的动态模拟模型。利用不同年份不同播期的试验资料对模型进行了验证,累积叶面积指数L（z）的模拟结果与1∶1直线之间的R^2和均方根误差分别为0.969和0.257,叶面积指数LAI的模拟结果与1∶1直线之间的R^2和均方根误差分别为0.936和0.305。结果说明模型具有较好的预测性和实用性。模型的模拟结果可作为冠层结构参数,用于冠层辐射传输模型和光合作用模型。     

大型悬吊井筒抽芯式泵机组安装质量控制

由于悬吊井筒抽芯式泵机组结构不同于传统的苏式泵，按原有的规范和要求不能保证该型机组安装检修质量．仅以厂家提供的说明书要求进行安装，因制造工艺、精度等原因，运行过程中，机组稳定性差，故障率高等一直困扰着使用单位．为保证机组安装质量，消除机组运行中常见的不正常现象和故障，以64LKXA-24．5型立式泵机组为例，针对该型机组结构形式的特殊性，根据规范的安装要求，结合安装检修过程中存在的问题，介绍了该形式泵机组的主要安装方法，提出了相应的注意事项．