Expression of the high mobility group A1 (HMGA1) and A2 (HMGA2) genes in canine lymphoma: analysis of 23 cases and comparison to control cases

Overexpression of high mobility group A (HMGA) genes was described as a prognostic marker in different human malignancies, but its role in canine haematopoietic malignancies was unknown so far. The objective of this study was to analyse HMGA1 and HMGA2 gene expression in lymph nodes of canine lymphoma patients. The expression of HMGA1 and HMGA2 was analysed in lymph node samples of 23 dogs with lymphoma and three control dogs using relative quantitative real‐time RT‐PCR. Relative quantity of HMGA1 was significantly higher in dogs with lymphoma compared with reference samples. HMGA2 expression did not differ between lymphoma and control dogs. With the exception of immunophenotype, comparison of disease parameters did not display any differences in HMGA1 and HMGA2 expression. The present findings indicate a role of HMGA genes in canine lymphoma. This study represents the basis for future veterinary and comparative studies dealing with their diagnostic, prognostic and therapeutic values.     

乙酸钠对油酸诱导的BRL-3A细胞脂肪变性的影响及机制分析

通过向油酸诱导的大鼠肝成纤维细胞(BRL-3A)脂肪变性模型中添加不同浓度(2、4、8 mmol·L^-1)的乙酸钠,探讨其对脂肪变性细胞模型脂代谢的调控机理及细胞损伤的修复作用。试验方法：1)用不同浓度的油酸(0、0.03、0.06、0.12、0.24、0.48) mmol·L^-1刺激BRL-3A细胞24 h后,分别检测细胞相对活力、总脂滴面积、三酰甘油(TG)含量、天门冬氨酸氨基转移酶(AST)及丙氨酸氨基转移酶(ALT)活性,建立脂肪变性细胞模型;2)向BRL-3A细胞中添加不同浓度的乙酸钠,通过流式细胞术检测细胞凋亡率;3)用不同浓度的乙酸钠和0.12 mmol·L^-1油酸共同孵育BRL-3A细胞,试验分为4组,分别为油酸处理组、2 mmol·L^-1乙酸钠+油酸处理组、4 mmol·L^-1乙酸钠+油酸处理组和8 mmol·L^-1乙酸钠+油酸处理组,分别对细胞脂滴、TG含量、AST、ALT活性、AMPK信号通路蛋白以及脂代谢关键基因进行检测。结果显示:1)用0.12 mmol·L^-1油酸处理BRL-3A细胞24 h,成功建立BRL-3A细胞脂肪变性模型。2)不同浓度的乙酸钠对BRL-3A细胞凋亡率没有影响;3)4、8 mmol·L^-1乙酸钠处理脂肪变性细胞模型后,与油酸处理组相比,细胞总脂滴面积、每平方毫米脂滴数、TG含量、AST和ALT活性均显著(P<0.05)或极显著(P<0.01)下降,P-AMPK表达水平显著(P<0.05)或极显著(P<0.01)上升;脂合成代谢相关基因ACC、FAS以及SCD-1 mRNA表达水平均有一定程度下降;脂分解代谢相关基因CPT-1、CPT-2以及ACO mRNA表达水平均有一定程度上升。本研究表明,乙酸钠会通过AMPK通路激活脂分解代谢,减轻肝细胞脂质蓄积,并且对油酸诱导的BRL-3A细胞脂肪变性模型的损伤具有一定缓解作用。     

畜群规模的结构决策研究

结构和规模是影响草地放牧生态系统功能实现的重要因素。本文通过建立和分析畜群种群动态模型, 揭示了母畜结构参数是影响畜群规模唯一因素的一般规律：（１） 当１２ ∑ｒｉ＝ １ｂｉ ∏ｉｊ＝ １ ｑｉ,ｊ－ １ｐｉ,ｊ－ １ （１ － ｓｉ,ｊ－ １）（１ － （１ － ｑｉ,ｊ－ １） ｐｉ,ｊ－ １ （１ － ｓｉ,ｊ－ １）） ＝ １ 时, 畜群规模稳定, 基本保持不变;（２） 当１２ ∑ｒｉ＝ １ｂｉ ∏ｉｊ＝ １ ｑｉ,ｊ－ １ｐｉ,ｊ－ １ （１ － ｓｉ,ｊ－ １）（１ － （１ － ｑｉ,ｊ－ １） ｐｉ,ｊ － １ （１ － ｓｉ,ｊ－ １）） ＜ １ 时, 畜群规模呈下降趋势,最终趋近于零;（３） 当１２ ∑ｒｉ＝１ｂｉ ∏ｉｊ＝ １ ｑｉ,ｊ－ １ｐｉ,ｊ－ １ （１ － ｓｉ,ｊ－ １）（１ － （１ － ｑｉ ,ｊ－ １） ｐｉ,ｊ－ １ （１ － ｓｉ,ｊ－ １）） ＞ １ 时, 畜群规模随年度不断膨胀, 并最终突破系统的承载能力。     

Assessment of stiffness and strength of 4 different implants available for equine fracture treatment: a study on a 20 degrees oblique long-bone fracture model using a bone substitute

OBJECTIVE: To compare the mechanical properties of 4 stabilization methods for equine long-bone fractures: dynamic compression plate (DCP), limited contact-DCPlate (LC-DCP), locking compression plate (LCP), and the clamp-rod internal fixator (CRIF--formerly VetFix). STUDY DESIGN: In vitro mechanical study. SAMPLE POPULATION: Bone substitute material (24 tubes) was cut at 20 degrees to the long axis of the tube to simulate an oblique mid-shaft fracture. METHODS: Tubes were divided into 4 groups (n=6) and double plated in an orthogonal configuration, with 1 screw of 1 implant being inserted in lag fashion through the "fracture". Thus, the groups were: (1) 2 DCP implants (4.5, broad, 10 holes); (2) 2 LC-DCP implants (5.5, broad, 10 holes); (3) 2 LCP implants (4.5/5.0, broad, 10 holes) and 4 head locking screws/plate; and (4) 2 CRIF (4.5/5.0) and 10 clamps in alternating position left and right of the rod. All constructs were tested in 4-point bending with a quasi-static load until failure. The implant with the interfragmentary screw was always positioned on the tension side of the construct. Force, displacement, and angular displacement at the "fracture" line were determined. Construct stiffness under low and high loads, yield strength, ultimate strength, and maximum angular displacement were determined. RESULTS: None of the implants failed; the strength of the bone substitute was the limiting factor. At low loads, no differences in stiffness were found among groups, but LCP constructs were stiffer than other constructs under high loads (P=.004). Ultimate strength was lowest in the LCP group (P=.01), whereas yield strength was highest for LCP constructs (409 N m, P=.004). CRIF had the lowest yield strength (117 N m, P=.004); no differences in yield strength (250 N m) were found between DCP and LC-DCP constructs. Differences were found for maximum angular displacement at the "fracture" line, between groups: LPC相似文献   

Closed system anaesthesia in dogs using liquid sevoflurane injection; evaluation of the square-root-of-time model and the influence of CO2 absorbent

Objective To determine whether predictable alveolar concentrations of sevoflurane are reliably produced in dogs when liquid sevoflurane is injected into closed circuit breathing systems, as calculated by Lowe's square‐root‐of‐time anaesthetic uptake model, and to confirm the validity of the model using soda lime and calcium hydroxide lime. Study design Prospective clinical study. Animals Eleven healthy dogs with a mean body mass of 34 ± 9 kg scheduled for pelvic limb orthopaedic surgery. Materials and methods Following pre‐anaesthetic medication, anaesthesia was induced with propofol and maintained with sevoflurane in a closed circle system. Epidural anaesthesia was performed with morphine and bupivacaine. Liquid sevoflurane was injected into the circuit by syringe, using dosages and time intervals derived from Lowe's square‐root‐of‐time anaesthetic uptake model. The target alveolar concentration chosen was 1.1 × MAC (2.6% end‐tidal sevoflurane). Either soda lime (group S; n = 6) or calcium hydroxide lime (Amsorb; group A; n = 5) were used for CO₂ absorption. Sevoflurane concentration and the respiratory gas composition were measured with an infrared gas analyser. Results End‐tidal sevoflurane concentrations were close to the predicted value of 2.6% at 9 minutes (2.53 ± 0.1% group S; 2.60 ± 0.26% group A) and 16 minutes (2.55 ± 0.30 group S; 2.52 ± 0.28% group A) but declined thereafter to reach 50% (group S) and 64% (group A) of the predicted value at 121 minutes. There was a constant trend towards higher end‐tidal sevoflurane concentrations in group A but the difference was not statistically significant. Conclusions The square‐root‐of‐time model leads to significantly lower alveolar concentrations than expected, suggesting that the rate of sevoflurane uptake in dogs declines less rapidly than predicted. The use of Amsorb tends to reduce the deviation from predicted concentrations. Clinical relevance The model used in this study provided only an approximate guide to the volume of liquid sevoflurane required. Consequently, the definitive dose schedule must be based on measured anaesthetic concentrations and clinical monitoring.     

Determination of Normal Values Using an Automated Coagulation Timer for Activated Coagulation Time and its Application in Dogs with Hemophilia

The present study was performed to determine normal values for the Medtronic HemoTec automated activated coagulation time (ACT) analyzer (Medtronic HemoTec Inc, Parker, CO, distributed in Switzerland by Convergenza AG, Vaduz, Liechtenstein), and to evaluate its ability to detect dogs with hemophilia. ACT was measured in 43 healthy dogs presented to the Companion Animal Hospital, University of Bern, Bern, Switzerland, with the Medtronic HemoTec ACT analyzer to determine normal values. The mean +/- 2 standard deviations (SDs) of the values obtained was defined as the normal range. ACT was measured 8-10 times on the same day in 6 dogs to determine repeatability. ACT also was measured in 11 dogs with hemophilia and compared with a conventional visual ACT measurement test and with the activated partial thromboplastin time (APTT). ACT values of the 43 dogs used to determine normal values ranged from 66.5 to 97.0 seconds (mean, 79.3 seconds; SD, 7.35 seconds; median, 78.5 seconds). A range of 64-95 seconds (mean +/- 2 SDs) was defined as the normal range for the tested device. Repeatability was poor (r = 0.256). ACT values measured with the automated device did not correlate with ACT values measured with a conventional visual test or with APTT Sensitivity of the test was 90.9%, specificity was 98.0%, and accuracy was 96.7%. Variability in the test results was large and may lead to incorrect results. The automated measurement device was not superior to the conventional visual method in evaluating dogs with hemophilia.     

Murine xenograft model demonstrates significant radio-sensitising effect of liposomal doxorubicin in a combination therapy for Feline Injection Site Sarcoma

Therapy of cats suffering from feline injection site sarcomas (FISS) is still a challenging problem, as the recurrence rate after surgery is up to 70%. Four FISS-derived primary tumour cell lines and corresponding xenograft tumour mouse models were established to evaluate the efficacy of a concomitant chemo-/radiation therapy with doxorubicin. In vitro, strongly depending upon the timing of administration, pre-treatment with 0.25 µmol doxorubicin resulted in a significant enhancement of radiation-induced (3.5 Gy) tumour cell death. This result was confirmed in vivo, where only the combined chemo-/radiation therapy resulted in a significant reduction in tumour growth compared to the respective mono-therapies with either doxorubicin or radiation. These results support the use of the concomitant chemo-/radiation therapy for adjuvant treatment of FISS, particularly in advanced or recurrent disease where surgery alone is no longer feasible.     

乳牛体型性状线性评定数学模型的指导和应用

本文说明了乳牛体型性状线性评定的常规方法,在此基础上推导出了该评定方法的数学模型。该模型的提出,极大地简化了常规评定方法的繁琐计算,值得在乳牛业生产实践中推广使用。     

Genetic parameters for abnormal sucking traits in Austrian Fleckvieh heifers

Cross‐sucking and intersucking are considered abnormal behaviours in cattle and constitute a common problem in dairy farming. Cross‐sucking in calves is defined as sucking any body parts of another calf whereas intersucking in heifers and cows is defined as sucking the udder or udder area. The aim of this study was to determine the genetic variability for abnormal sucking behaviour by estimating genetic parameters and examining individual differences between sires with large progeny groups. By means of a questionnaire, cattle breeders in the federal state Lower Austria were requested to identify all currently kept animals which are known of either inter‐ or cross‐sucking (both defined as the same binary trait ‘sucking’ with 0 and 1 referring to the absence and presence of this abnormal behaviour) or allowing sucking (also treated as a binary trait, scored as 1 if an animal was known of allowing herd mates to suck and 0 otherwise). Records of 1222 farms and 13 332 dual purpose Simmental females aged between 21 and 700 days were investigated applying a linear animal model with fixed herd × year × season and random genetic animal effect and a threshold sire model with the herd × year × season effect being treated as random. In total, 8.6% and 4.1% of all calves/heifers were observed sucking and allowing sucking, respectively. Heritabilities of 0.040 ± 0.014 and 0.007 ± 0.006 (linear animal model) and 0.116 ± 0.041 and 0.026 ± 0.024 (threshold model) were found for the traits sucking and allowing sucking, respectively. Breeding values were estimated applying the same models for the trait sucking. Taking all 254 sires into account, the Pearson and Spearman correlation coefficients between breeding values estimated by linear animal and sire threshold model were 0.86 and 0.80. Thus, little difference was observed between the two methods.     

牧草-鹅-鲜食葡萄循环生态种养模式的构建与实践

为了提高葡萄园资源利用率和综合效益,构建了牧草-鹅-鲜食葡萄循环生态种养体系。实践表明,在设施葡萄园推广套种牧草养鹅、鹅粪生产有机肥料、有机肥料种植葡萄和牧草等高效配套技术,取得了良好的经济效益、生态效益和社会效益。实施牧草-鹅-鲜食葡萄循环生态种养是江苏沿海地区发展现代农业的一种有效生产模式。