Serum C-reactive protein concentration as an indicator of remission status in dogs with multicentric lymphoma

BACKGROUND: The acute-phase protein C-reactive protein (CRP) is used as a diagnostic and prognostic marker in humans with various neoplasias, including non-Hodgkin's lymphoma. OBJECTIVE: To evaluate if CRP could be used to detect different remission states in dogs with lymphoma. ANIMALS: Twenty-two dogs with untreated multicentric lymphoma. METHODS: Prospective observational study. Blood samples were collected at the time of diagnosis, before each chemotherapy session, and at follow-up visits, resulting in 287 serum samples. RESULTS: Before therapy, a statistically significant majority of the dogs (P = .0019) had CRP concentrations above the reference range (68%, 15/22). After achieving complete remission 90% (18/20) of the dogs had CRP concentrations within the reference range, and the difference in values before and after treatment was statistically significant (P < .001). CRP concentrations of dogs in complete remission (median, 1.91; range, 0.2-103) were significantly different (P = .031) from those of dogs with partial remission (median, 2.48; range, 0-89), stable disease (median, 1.77; range, 1.03-42.65), or progressive disease (median, 8.7; range, 0-82.5). There was profound variation of CRP measurements within each dog. CONCLUSIONS: CRP is useful in determining complete remission status after treatment with cytotoxic drugs. However, the individual variation between dogs means CRP concentration is not sufficiently different in other remission states to permit its use in monitoring progression of the disease. Greater reliability in determining remission status might be achieved by combining CRP concentration with other serum markers.     

膜孔灌溉田面综合糙率系数的确定

根据膜孔灌溉田面水流运动特性 ,建立了膜孔灌溉田面水流运动零惯性量数学模型 ,并将其与优化理论相结合 ,提出了确定膜孔灌溉田面综合糙率系数的优化模型。实例计算与方法验证表明 ,该方法能够简单而有效地确定膜孔灌溉田面综合糙率系数。该研究成果为膜孔灌溉理论与技术的进一步研究奠定了基础     

Hydrolysis and Condensation of Silane Agent for Metallic Surface Treatment

Novel surface treatment technique by silane film is developing for metallic anti corrosion and coat improvement. The key points, hydrolysis and condensation, for the stability of the Silane agent(SA) solution is investigated, and the effective factors of stability for silane agent solution and the relative rule are discussed. It is found that stability of SA solution is related to the temperature, pH, solvents, SA concentration and additive by studying the state of the solution and the conductivity-time curve of SA solution. Meanwhile, controlling factors and improving methods for SA stability are proposed to guide the practical application of metallic surface anti-corrosion treatment by SA.     

Calculating the Hollowing-center Grounding Device Resistance Based on the Surface Charge Simulation Method

An equivalent model for hollowing-center grounding device is proposed, the hollowing-center grounding device resistance is calculated with the surface charge simulation method and the computer programme is programmed based on this model. The accuracy of the model and method is validated by experimentation.     

Dropwise Condensation Heat Transfer Coefficient on the Horizontal Circular Surface with Radial Gradient Surface Energy

A theoretical model is developed for the dropwise condensation heat transfer on the horizontal circular surface with radial gradient surface energy based on the heat transfer model of individual condensate drop and the size distribution model of condensate drop on homogeneous condensation surface.The effect of variation of contact angle on the gradient surface on condensation heat transfer and condensate drop size distribution is taken account of in this model.The theoretical calculation method was obtained to predict the dropwise condensation heat transfer coefficient on the horizontal circular surface with radial gradient surface energy under various wall subcooled temperature,contact angle profile on wall surface,and working fluid.The effects of surface energy gradient,wall subcooled temperature,and thermophysical properties of condensate on the condensation heat transfer are discussed respectively.The calculation results show that the condensation heat transfer coefficient increases slightly with the increase of wall subcooled temperature.As latent heat and surface tension increasing,the condensation heat transfer coefficient increases.A larger surface energy gradient induces a larger condensation heat transfer coefficient.     

Penetration behavior of bath induced by top-blown gas jets for steelmaking converter

The cavity induced by top-blow gas jets impinging on the bath surface is one of most important parameters, which has overwhelming influence on the rate of slag formation and metallurgical performance. Water model experiments are conducted through a 1/10 scaled-down top-blown convertor. Effects of lance height and gas flow rate on penetration behavior are studied, and also the influence mechanism of liquid surface tension on penetration depth is addressed based on the experiments and theory analysis. An energy utilization index (EUI) is defined to reflect how much the impinging kinetic energy of gas jets are transferred into bath for formation of cavity, and an improved model is proposed to predict penetration depth of jets. The results show that penetration depth increases with lowering lance height and increasing gas flow rate, and impact diameter increases with increasing lance height, but is little affected by gas flow rate. Influence of liquid surface tension on penetration depth is enhanced with increasing surface tension and penetration depth. The EUI increases with increasing lance height, and a function relationship of it with lance height is obtained based on the experiments.     

New Method of Founding Profile Equations and Pressure Angle Formula to the Cylindrical Cam Mechanism with Slide Roller-Follower

According to existent problems on design and application of the cylindrical cam mechanism with the slide roller-follower, the one correct concept about profile design and pressure angle is presented. Based on this concept, the theoretical profile,practical profile,meshing surface equations and pressure angle formula of the cam mechanism are built up by using opp.rotation analysis and offset surface principle. This method is very simple and clear, and avoids the abstract analysing process in meshing principle. The mathematic models built by this paper can be used to design,manufacture and check this type of cam mechanism correctly, and also create conditions to make deeply meshing property analysis of this mechanism.