Approaches to enhance power density of gearboxes for wind turbines

Based on pitting strength, some approaches to enhance power density of gearboxes for wind turbines are discussed. The calculation load is greatly reduced by power division. Allowable stress numbers are effectively increased by improving property of quality materials, precision heat treatment or shot peening. Load capacities can be also obviously enhanced by improving the tooth shape of morphology optimization of tooth root, tooth correction or superfinishing of tooth surface. The center distance is effectively decreased by minishing minimum allowable safety factor or enlarging face width. The power density of gearbox can be further improved by means of structure optimization of planet carrier or uniform load of planetary gear transmission.     

Optimum Planting System for Energy Saving and Healthy Demanded

It is proved that planting is effective to improve environment both indoor and outdoor resulted from the functions of plants to clean air and save energy. So the contradiction between saving energy and comfort,healthy demanded by people can be solved by planting. The planting have being emphasized and expanded during recent years,but in the planting plan,just the function of beautifying the environment is concerned and the function of ecological and saving energy are neglected. The analysis on the ooptimum system of planting is to make the planting system as an organic composition in the effectiveness structure and space layout of the city. Based on the study on equivalent relation of different effects on environment, the optimum system of planting structure will be determined in order to achieve the integrated effects of planting on environment.     

Analysis on the Grain Growing Characters in Wheat under Different Seedling Density

通过对不同密度处理的小麦子粒生长过程的分析表明：小麦开花后子粒鲜重、体积均呈“低—高—低”的变化,鲜重的变化略滞后,开花后含水量则不断下降,下降速率最快时期与灌浆速率最高时基本吻合。用logistic方程拟合了不同密度小麦子粒灌浆过程,快增期的天数和灌浆速率比较稳定;缓增期天数和灌浆速率的变异系数较大。因此,在提高缓增期灌浆速率的基础上,延长灌浆缓增期是目前增加粒重的关键。     

北方粳稻“植生带”育秧设备定向排种装置的研制

为满足超级稻每穴(2±1)粒种子精量播种的特殊农艺要求,在纸夹定位水稻精密育秧设备研究基础上,研发出一种新型超级稻定向排种装置。初步排种试验表明,该装置可将种箱中杂乱无章的稻种分离出来后,在组合滑道上逐渐沿其长轴方向排列成连续的种子流,为超级稻植生带育秧设备的研制提供理论与实践依据。     

走系统工程之路加快玉米联合收获发展步伐

对玉米联合收获机推广应用较多的山东、山西及河北等省的玉米联合收获机试验情况进行了研究分析．其结果表明，影响玉米联合收获机推广的诸多因素中，最为关键的因素就是行距的适应性问题。为此，结合小麦联合收获机推广经验，指出了加快玉米联合收获机推广应用速度的关键是实现玉米生产过程机械化，而在小麦玉米一年两熟地区则要从小麦的种植规格入手，即实现小麦玉米全过程的机械化；并将系统工程的方法运用于种植收获的全过程，真正实现优质与高效的现代化农业生产。     

双环带种肥穴播器的设计

针对目前穴播机械的现状,设计了一种新型的双环带种肥穴播器,介绍了其基本结构和工作原理.从结构上分析了种肥穴播合理性,并推导出了穴播器的入土端方程.试验证明,机速在1.0m/s时,该穴播器投放种子与肥料可靠,穴粒数、穴距和播深合格率都能满足要求.鸭嘴强制后开式设计有效解决了堵土问题,播种精度较高,可广泛应用于花生、棉花、玉米与小麦等农作物的播种.     

湖南省水稻种植环节的机械化选择

目前湖南水稻生产机械化的发展势头喜人,但其种植环节的机械化发展较慢,水平还很低,成为水稻生产机械化最突出、最薄弱的环节,是提高水稻综合生产能力的重点和难点,也是各级农机管理、推广部门一直以来不断研究、探索、寻求解决的重要课题.为此,概述了湖南省水稻种植机械化发展历史,分析了当前抛秧、直播、插秧三种方式的利弊,因此区域水稻生产的特点,决定其在今后一段时间内,不论是哪种种植方式都不可能完全淘汰,想用其中任何一种方式包打天下,都是不现实的.但因水稻机械化插秧技术具有省工节本,减轻劳动强度;增产、增效;避病避虫;高产稳产的优势,从长远发展来看,机械化插秧代替人工将势在必行.     

垄膜沟种涌泉灌溉技术要素的试验研究

在垄膜沟种农田进行了涌泉灌灌水试验，通过对水流推进过程观测，分析了田面水流运动特性，研究了沟宽对田间灌水均匀度的影响，并对垄膜沟种涌泉灌溉技术要素进行了探讨。结果表明，涌泉灌田面水流推进曲线可用幂函数表示。随着沟宽的增大，灌水均匀度呈下降趋势。从灌水质量和管网成本两方面综合考虑，试验条件下灌水技术要素的入沟流量、沟宽和灌水器间距分别以80～100L/h、20-30cm和4～5m为宜。     

不同降解阶段填埋垃圾体的气体渗透特性研究

通过对不同降解阶段填埋垃圾体渗透系数的测定，研究了在不同压实密度、不同含水率条件下垃圾体渗透特性的变化情况，实验表明：1.对不同降解阶段的填埋垃圾体，新鲜垃圾及混和垃圾的渗透系数接近，腐熟垃圾明显高于前两者；随压实密度增加，其气体渗透系数均呈指数规律递减；2.随着垃圾体含水率的增加，腐熟与新鲜垃圾的渗透系数均呈线性规律递减，含水率对渗透系数的影响要远小于压实密度的影响；3.新垃圾、混合垃圾、腐熟垃圾均具有较显著的各向异性特征，在典型压实密度下，水平方向的气体渗透系数Kh为垂直方向渗透系数Kv的3.5-27.3倍。     

Effects of planting density on the productivity and water use of tea (Camellia sinensis L.) clones: I. Measurement of water use in young tea using sap flow meters with a stem heat balance method

Sap flow meters based on the stem heat balance method were used to measure the mass flow rates or water use in young potted tea (Camellia sinensis L.) plants of clones AHP S15/10 and BBK35. The meters were constructed on site and installed onto the stem or branch sections of field growing plants in an experiment originally designed to study the effects of plant population density and drought on the productivity and water use of young tea clones. The objective of the study was to use the SHB method as a first attempt to use sap flow meters for determining the water use of young tea growing in the field under well watered conditions in Tanzania. The results are reported and recommendation made for further work on using the technique.