抛物线形混凝土衬砌渠道标准化结构形式研究

通过实例比较了2种常用的抛物线形渠道水力最佳断面参数,得出二次抛物线渠道的水力性能优于半立方抛物线形渠道,并推导出了二次抛物线渠道实用经济断面的计算公式,提出了详细的计算步骤,给出了二次抛物线渠道实用经济断面水力计算表以供设计人员使用。同时,根据渠道工程实际应用情况和现行规范要求,提出了抛物线形混凝土衬砌渠道标准化结构形式,计算得出了常用抛物线形混凝土渠道结构尺寸、不同比降流量表,在实际工程应用中可根据设计渠道的具体情况进行选用。     

基于Lasso和支持向量机的组合预测及其应用

针对Lasso方法与支持向量机两者的联系与各自的优势，给出了基于Lasso与支持向量机的串联型、并联型和嵌入型三种组合预测，并将它们运用到我国粮食价格预测中.实证结果表明，与单一预测方法的预测结果相比，基于Lasso方法与支持向量机的串联型组合预测和嵌入型组合预测具有更高的预测精度.     

瘦肉型猪组合配套杂交效果研究

为探索瘦肉型猪组合配套杂交方法和效果而进行试验。试验采用HN121（温氏杜洛克猪）、HN212（法系皮特兰♂×温氏杜洛克♀）为父本,以HN204（温氏大白♂×美系长白♀）为母本,对HN323（HN121×HN204）和HN424（HN212×HN204）两个组合配套进行研究。结果表明,HN424组合与HN323组合相比母猪的窝产仔数、窝产活仔数、仔猪初生窝重、21日龄仔猪成活率、21日龄窝重等繁殖性状差异不显著（P>0.05）;HN424组合仔猪的体重、背膘厚降低5.63%（P<0.05）,瘦肉率提高4.95%（P<0.05）,眼肌面积增大33.08%（P<0.01）,肉色评分降低7.19%（P<0.05）,大理石纹评分降低11.30%（P<0.01）,滴水损失率提高10.63%（P<0.01）,其他遗传性状差异不显著;HN424组合与HN204二元母系相比,日增重提高9.26%（P<0.05）,背膘厚减少16.41%（P<0.01）,料肉比减少8.02%（P<0.05）;HN323组合与HN204二元杂交母系相比,日增重提高7.20%（P<0.05）,背膘厚减少11.43%（P<0.01）,料肉比降低5.35%（P<0.05）。说明采取四元杂组合和三元杂交组合均对“大×长”（HN204）二元杂交有显著的遗传改良作用,“皮×杜×长×大”四元杂组合可显著提高猪的瘦肉率、眼肌面积,但肉色、大理石纹、滴水损失率等肉质指标变差,建议在“皮×杜×长×大”四系组合配套杂交中加入能改良肉质基因的猪种。     

Heavy Metal Immobilization in Contaminated Soils using Phosphogypsum and Rice Straw Compost

The application of soil amendments to immobilize heavy metals is a promising technology to meet the requirements for environmentally sound and cost‐effective remediation. The present study was carried out to evaluate the result of phosphogypsum (PG) used alone and in combination with compost (CP) at a mix ratio of 1:1 wet weight ratio (PG + CP) at 10 and 20 g dry weight kg⁻¹ dry soil, on heavy metal immobilization in contaminated soil and on canola growth. The results revealed that the Pb, Cd and Zn uptake of canola plants was reduced by the application of PG alone and when it was mixed with CP as compared with untreated soil. At an application rate of 10 g dry weight kg⁻¹ dry soil of (PG + CP) the dry weight of canola plants increased by 66·8% was increased in comparison with its weight in the untreated soil. The addition of PG alone resulted in more pronounced immobilization of heavy metal as compared with PG mixed with CP. Plant growth was improved with CP addition, but heavy metals immobilization was the greatest in PG alone treatments. Results suggest that PG may be useful for the immobilization of heavy metals in contaminated soils. Copyright © 2014 John Wiley & Sons, Ltd.     

平原丘陵地区水土资源联合优化配置

通过对区域水资源和土地资源概况进行研究,利用大系统递阶优化思想,以供水对象相对缺水率最小和农业经济效益最大为目标,建立了区域水土资源联合优化配置模型,并以句容市为例,对平原丘陵地区的水资源在时间和区域上进行了合理安排、设计、组合和布局,对农业种植结构进行了调整。研究结果表明:水资源是土地资源发挥最大优势的基本条件,水资源利用合理与否,直接影响到土地资源的生产效率;而土地资源的利用程度也影响着水资源的变化,土地资源利用效率高,则为水资源的合理开发利用创造条件。     

豫西丘陵地区果牧结合立体生态园设计的探讨

根据豫西丘陵地区生态、经济、社会条件以及目前农牧业生产中存在的突出问题，提出果牧结合立体生态园建设是该地区生态农业发展的重要途径。并在调查和初步研究基础上设计了“畜（禽）—果”、“畜（禽）—沼—果”等果牧结合模式，分析了生态园建设研究中要探讨的具体内容。     

Determination to Weighting Coefficient of Combination Forecast Based on Rough Set Theory

The problem of determination to weighting coefficient is a key and difficulty for combination forecast. A method of determining weighting coefficient based on rough set theory is showed in this paper. Determining weighting coefficient is translated into estimating significance of attributes among rough set. A relation data model about combination forecast is established. Knowledge systems are built through making attribute value into eigenvalue. Under data moving, the weighting coefficients of a combination forecast model are computed by analyzing the dependence and significance of forecasting method for the predicted object. The proposed approach overcomes the subjectivity of traditional determination to weighting coefficient, avoids computing linear or nonlinear extremum problem and makes combination forecast more objective. The validity of the proposed approach is verified with a case.     

Two-dimensional Optimum Cutting Stock Method Based on Internet and Its Implementing Technique

Two dimensional Optimum Cutting Stock is a NP complicated problem. Each of optimum software gets the cutting results by using proximate and heuristic methods. But different optimum methods and their optimum software may not realize perfect effect according to certain data framework. Furthermore, enterprises can not buy lots of optimum software to choose the most optimized plan. Because of such problems, this paper provides a two dimensional optimum cutting stock method based on Internet and offers the real implementing technique of such method. The experiments, show that this method promotes the general optimum effect of two dimensional optimum cutting stock greatly.     

The Monitoring Measurements and Country Rock Control of NATM in Tunnel of Express Road during Construction

In this paper the author' s study on the monitoring measurement technique of NATM,the regularity and conditions of the country rock deformation are analysed based on the site measurement data in the west section of Zhongliangshan tunnel. The regression analysis of measure data for different measure lines of vavious country rock is done by the use of self-compiled CRAP program. The stability criterion for various rockmass and optimum time for primary and permanent support are provided. The conclusion available could conduct the theoretical research of NATM deeply as well as tunnel design and construction.     

A STUDY ON HEAT AND MOISTURE STATE OF HULL LAYER FOR THERMAL INSTULATION OF A COLD STORAGE

This paper analyses the thermal moist characteristics of the hull layer beside an air layer at lower temperature in an envelope for a cold storage and presents a new method of waterproof by air layer. With test data from engineering practice, the theory on the barrier of self moisture proof at the surface sublayer of the hull layer in an attic on a cold storage is proven. The dried zone about three phase point is confirmed. It is a new knowledge for thermophysics on thermal design of a cold storage with an optimum thermal performance.