文山州出口烟叶质量特点及可用性综述

阐述了英美烟草公司(BAT)与云南省文山州烟草合作历程,从烟叶物理质量特征、化学成分、感官评吸质量、安全性等方面介绍了文山州出口烟叶的质量特点及其等级与可用性,以供参考。     

Radiation interception and radiation use efficiency of potato affected by different N fertigation and irrigation regimes

Three years of field experiments were carried out to explore the response of potato dry matter production, accumulated intercepted photosynthetic active radiation (Aipar) and radiation use efficiency (RUE) to five N levels providing 0, 60, 100, 140 and 180 kg N ha⁻¹ and three drip irrigation strategies, which were full, deficit and none irrigation. Results showed that, irrespective of years, dry matter production and Aipar were increased by prolonged N fertigation, even though N fertigation was carried out from middle to late growing season. The highest total and tuber dry matter and accumulated radiation interception in all three years were obtained when potatoes were provided with 180 kg N ha⁻¹. RUE on the other hand was not affected by N regime. Thus, increases in total dry matter production with increasing N levels were essentially caused by higher Aipar. The strongest response to N fertilization occurred when most N was applied early in the growing season and the latest N fertilization should be applied no later than 41–50 days after emergence. Deficit irrigation, which received ca.70% of irrigation applied to full irrigation, did not reduce radiation interception and radiation use efficiency.     

Dense planting with less basal nitrogen fertilization might benefit rice cropping for high yield with less environmental impacts

Dense planting and less basal nitrogen (N) fertilization have been recommended to further increase rice (Oryza sativa L.) grain yield and N use efficiency (NUE), respectively. The objective of this study was to evaluate the integrative impacts of dense planting with reduced basal N application (DR) on rice yield, NUE and greenhouse gas (GHG) emissions. Field experiments with one conventional sparse planting (CK) and four treatments of dense planting (increased seedlings per hill) with less basal N application were conducted in northeast China from 2012 to 2013. In addition, a two-factor experiment was conducted to isolate the effect of planting density and basal N rate on CH₄ emission in 2013. Our results show that an increase in planting density by about 50% with a correspondingly reduction in basal N rate by about 30% (DR1 and DR2) enhanced NUE by 14.3–50.6% and rice grain yield by 0.5–7.4% over CK. Meanwhile, DR1 and DR2 reduced GWP by 6.4–12.6% and yield-scaled GWP by 7.0–17.0% over CK. According to the two-factor experiment, soil CH₄ production and oxidation and CH₄ emission were not affected by planting density. However, reduced basal N rate decreased CH₄ emission due to it significantly reduced soil CH₄ production with a smaller reduction in soil CH₄ oxidation. The above results indicate that moderate dense planting with less basal N application might be an environment friendly mode for rice cropping for high yield and NUE with less GHG emissions.     

In-field management of corn cob and residue mix: Effect on soil greenhouse gas emissions

In-field management practices of corn cob and residue mix (CRM) as a feedstock source for ethanol production can have potential effects on soil greenhouse gas (GHG) emissions. The objective of this study was to investigate the effects of CRM piles, storage in-field, and subsequent removal on soil CO₂ and N₂O emissions. The study was conducted in 2010–2012 at the Iowa State University, Agronomy Research Farm located near Ames, Iowa (42.0°′N; 93.8°′W). The soil type at the site is Canisteo silty clay loam (fine-loamy, mixed, superactive, calcareous, mesic Typic Endoaquolls). The treatments for CRM consisted of control (no CRM applied and no residue removed after harvest), early spring complete removal (CR) of CRM after application of 7.5 cm depth of CRM in the fall, 2.5 cm, and 7.5 cm depth of CRM over two tillage systems of no-till (NT) and conventional tillage (CT) and three N rates (0, 180, and 270 kg N ha⁻¹) of 32% liquid UAN (NH₄NO₃) in a randomized complete block design with split–split arrangements. The findings of the study suggest that soil CO₂ and N₂O emissions were affected by tillage, CRM treatments, and N rates. Most N₂O and CO₂ emissions peaks occurred as soil moisture or temperature increased with increase precipitation or air temperature. However, soil CO₂ emissions were increased as the CRM amount increased. On the other hand, soil N₂O emissions increased with high level of CRM as N rate increased. Also, it was observed that NT with 7.5 cm CRM produced higher CO₂ emissions in drought condition as compared to CT. Additionally, no differences in N₂O emissions were observed due to tillage system. In general, dry soil conditions caused a reduction in both CO₂ and N₂O emissions across all tillage, CRM treatments, and N rates.     

淮安区水稻测土配方施肥配方校正与示范对比试验报告

为验证肥料配方的准确性,发挥配方肥料施用的最大效益。通过田间校验,示范对比测土配方施肥的增产效果,进一步验证并完善淮安区的肥料配方,优化测土配方施肥技术参数。     

不同施肥处理对油茶生长及土壤肥力的影响

为探究不同施肥处理对油茶生长及土壤肥力的影响,连续3年在广西柳州市对5年生油茶人工林进行施肥试验研究。结果表明,施肥后,处理Ⅱ的树高、地径和冠幅的增长量明显高于其它处理,即有机—无机复混肥料直接施入油茶林地最有利于营养生长,而处理CK(不施肥)各项生长指标的增长量最低。不同施肥处理对油茶林地土壤养分各指标的影响差异较大,经灰色关联度法分析得出土壤综合肥力的高低顺序,其中处理Ⅲ(即无纺布包装有机—无机复混肥)施肥后对油茶林地土壤综合肥力的提高最显著,其次为处理Ⅰ(即有机栽培肥料),不施肥处理CK的土壤综合肥力则显著降低,土壤质量退化严重。     

桑叶养猪实用技术

桑叶养猪实用技术分为桑树种植技术和桑叶干粉发酵养猪技术两个部分。利用荒地种植桑树,降低生猪养殖饲养成本,桑叶养猪种养结合,成为生态农业典范。桑叶干粉发酵技术,提高了桑叶干粉的可消化率和饲料功能。桑叶干粉发酵料占配方6%~10%,做成桑叶猪饲料,替代3%~5%鱼粉、豆粕等蛋白质饲料,节约了饲料成本。桑叶喂养猪(简称桑叶猪,下同)的猪肉中含有肌苷酸等风味物质,显著提高猪肉胴体品质和猪肉风味。设计猪尿处理,采用红泥膜沼气池降解工程工艺应用后,降解水兑2倍清水对桑树喷灌工艺,减少人工处理劳力和成本费用。设计10%抗非洲猪瘟中药饲料添加剂+桑叶饲料,预期防治非洲猪瘟总效果85%以上。桑叶养猪实用技术可行,供同行参考。     

选举观察的制度引入与基层选举监督的创新路径——基于村委会选举观察员制度运行的分析

国内村委会选举观察员制度运行的成效和问题为选举观察制度的普遍引入提供了发展方向和问题警示。总结国内村委会选举观察员制度运行的得失,认为当今我国基层民主监督在理论与实践上的双重弱化状态和地方政治发展的实际需要是选举观察制度引入的基本条件,公众和媒体的参与、专家学者的推动等多重社会力量是促使选举观察制度运行的动力。选举观察制度的法制建设、政府部门的相对淡出、民间观察的介入与激励是选举观察制度完善与基层选举监督创新的基本路径。     

努力提高农科院所党的建设科学化水平

该文结合中国农科院及其所属研究所党建工作的情况,按照提高党的建设科学化水平的新要求,以科学发展观为指导,深刻理解和正确把握党的建设的科学化内涵,进一步深化对党的建设和执政规律的认识。此外,该文联系实际,分析农科院所党建工作的新特点,找准党建工作着力点,坚持以人为本,加强组织建设,深化创先争优,构建和谐院所,充分发挥党组织的政治核心作用等方面提高党建工作的科学化水平。     

我国金银花产质量影响因素及轻简化施肥推荐

金银花是我国一种用途广泛的传统大宗中药材，年需求量大，影响其产量和质量的因素也较多。本文通过文献检索，从产地特点、品种特性、土壤性质和施肥管理措施及后期加工等方面对影响金银花产质量的主要因素进行了综述。并通过引入结构方程模型，对不同因素对金银花产量的相对影响程度进行了探索性分析，对于某一产地的具体品种，单株产量的主要影响因素是土壤有机质、pH和速效钾含量等土壤因素，和氮肥用量等施肥因素。在此基础上，针对当前施肥现状，借鉴根区施肥法，进行了以干花重为基准的施肥量推荐,并提出了将全年所需肥料一次性施于根区的轻简施肥法，旨在为金银花的轻简化高产高效优质栽培提供思路与参考。