Automatic Generation of Curvilinear Grid for Finite Difference Method with Many Inner Objects

In this paper the partial differential equation of coordinate transformation is computed by the finite difference formulations and some examples were computed and illustrated in pictures.     

Analysis of Structure with Tuned Mass Damper under Earthquake

The analysis of vibration response of structure with TMD is carried out under earthquake ,considering the ground-structure interaction. The varying rule of square difference of displacement of structure with the TMD on or off by changing the first inherent frequency is also presented .It has been proved by comparing and analyzing that a TMDstructure with optimum parameters can efficiently reduce the vibration of structure under strong wind and earthquake,when the main frequency of the ground motion is within the range of TMD vibration reducing frequency.     

RECREATING SMALL SEAMLESS TUBE MILLS BY PIERCING INSFEAD OF ROLLING

This paper discuss the effects of automatic plug mills in small seamless tube mills. Far from traditional ideas,the auther comes rp with mew ideas, which adot the mew process of replacing rolling by piercing,a huge sum of economical interests and great social benefits will be gained.     

Simulation Propagation of Partial Discharge UHF Signals in Transformer

Many factors affect the propagation of ultra high frequency(UHF) signals caused by partial discharge(PD) on the waveforms and energy of signals in transformer.To investigate the relationshi Pof factors and UHF signals,simulation model of transformer for PD study are established.UHF signals in simulation model of transformer caused by PD are calculated using finite difference time domain method.By means of amplitude and cumulative energy plot of simulation signals,and combing the measured result,the following factors:distance between PD source and detection position,different metallic conductor position around detection position and iron core and winding are researched,which contribute to comprehend the propagation characteristic of UHF signals and detect UHF signals accurately.     

Around Body Flow Computation with Vortex-Flow-streamFunction in Boundary Fitted Coordinates

In this paper, partial differential equations of vortex flow-stream function in boundary fitted coordinates and related ADI equations were listed. The flow around a cylinder in quadrilateral area by auto control boundary was computed. The diagram of distribution of speed arrow, constant lines of flow-stream function, vortex, two speed parts and pressure were studied.     

A MATHEMATICAL MODEL OF FUZZY EVALUATION METHOD FOR ENVIRONMENTAL POLLUTION

The problem of fuzzy evaluation of environmental pollution is importantboth in environment science and in environmental protection.Usual evaluationmethods have their own characteristics.This paper puts forward a mathematicalmodel of fuzzy evaluation method in grades by means of systematic analysisfor environmental pollution.At the same time,it assigns weighted values byordering based on paired comparison.     

平行动轴少齿差传动多齿接触问题研究

以有限元弹性接触分析理论为基础，建立了平行动轴少齿差内啮合齿轮多齿接触时的有限元模型，提出了一种对平行动轴少齿差内齿轮副啮合过程中实际接触齿对数、齿间载荷的分配及齿面载荷分布的分析计算方法。以SH－350型平行动轴少齿差双环减速器为例，分析了其在额定载荷工况下的实际接触齿对数、齿间载荷分配及齿面载荷分布规律等，并利用应变测试方法进行了相应的实验，验证了理论分析计算的结论，为平行动轴少齿差内啮合齿轮传动承载能力的估算，齿轮几何参数的确定及零部件的强度分析计算提供了理论依据。     

宽顶堰平板压差式量水闸过流规律

灌区水量的测量问题正日益受到关注。对于平原灌区，研究利用以淹没出流为主的工作闸门进行渠道量水具有现实意义。基于孔板式流量计的测流原理，提出一种平板压差式量水闸门。选择不同闸门开度e与闸门上游水深H组合，通过室内试验研究分析了闸孔淹没出流的相关测流规律，得出实用的流量系数经验公式。结果表明，该型闸门结构简单，取压方便，量水精度较高，集水位流量调控与测量为一体，适合应用于平原灌区。     

汇流口水流水力特性研究综述

综述了60多年来对汇流口水流的研究成果，提出汇流口分为“Y”型汇流口与“非对称型”汇流口两类。汇流口水流存在水流停滞区、流速偏向区、分离区、流速加速区、混合层区等。影响汇流口的主要控制因素有：汇流比、汇流角、河床高差、宽深比、汇流口下游干流弗劳德数等。尽管对汇流口水流的研究已经获得了丰硕的成果，但依然存在不少的问题：1、对“Y”型汇流口研究较少；2、汇流口水面形态的研究存在争论；3、有无螺旋流及螺旋流形式存在争议；4、实验室研究成果与野外实测成果存在差异。     

不同沙棘品种在定西的生长情况对比分析

通过对引进的7个沙棘品种的种子育苗及成苗定植，并对成活率、保存率、生长情况进行了观测，初步分析了引进的各沙棘品种类型在定西的适应性。