Influence of terminal rig configuration on the anatomical hooking location of line-caught yellowfin bream, Acanthopagrus australis

Abstract  Experiments were carried out to test the dependence of anatomical hooking location on terminal rig configuration, and identify strategies by which hook ingestion can be minimised to reduce post-release mortality of angled yellowfin bream, Acanthopagrus australis (Günther). Eighty-five anglers targeted yellowfin bream using different designs and sizes of circle and J hooks and recorded technical, environmental and biological data for each landed fish. Considerably fewer fish (16.6 and 8.5%, respectively) ingested hooks than those hooked in the mouth (82.1 and 88.6%), and a greater percentage of J hooks were ingested than circle hooks or a J hook modified with a 15-mm horizontal bar. Irrespective of hook type, the rate of ingestion also declined with increasing hook weight and decreasing fish size. In cage experiments, significantly more hooks baited with natural soft baits (e.g. intestines and cephalopods) were ingested than those baited with artificial baits, crustaceans or teleosts, while in the field fewer hooks were ingested using artificial bait (e.g. bread and pellets) than terrestrial animals, teleosts, crustaceans, teleost or terrestrial animal intestines, cephalopods or polychaetes. Similarly, rigs with floats, short traces or a sinker only on the hook, along with angling in environments with at least some current reduced ingestion. Based on this study, anglers targeting yellowfin bream should be encouraged to use circle or modified J hooks and, regardless of the hook design, the largest hook size possible attached to short traces or a sinker only and hard baits.     

氧氟沙星缓释药栓的研制及体外药物释放实验研究

研究可植入眼内的氧氟沙星缓药栓的体外药物缓释过程和效果。方法：将分子量各为６１２０和１２５５０的聚乳酸分别混载５％和１０％氧氟沙星制成药栓，并体外药物释放以及高效液相色谱法药物浓度测定。结果３０ｄ内氧氟沙星体外释放率为７０％－９０％，释药时间与滞物分子量呈正相关，结论：由氧氟沙星和聚乳酸制成的缓释药栓满足眼内炎治疗的基本要求。     

低甲醛释放脲醛树脂研究进展

从脲醛树脂胶粘剂的合成工艺、使用时加入添加剂、人造板的后处理等几个方面,综述了近几年来脲醛树脂及其胶接制品降低甲醛释放研究的新进展。     

微囊化沙门菌SP4噬菌体的制备及其缓释特性分析

通过采用阳离子醚化淀粉/海藻酸钠/黄原胶/纳米TiO₂/壳寡糖为原料制备微囊化SP4噬菌体,为控制沙门菌感染提供生物制剂。选用沙门菌SP4噬菌体,采用液滴法来制备微囊化SP4噬菌体,并对其效价、阳离子醚化淀粉浓度、海藻酸钠浓度、黄原胶浓度、壳寡糖浓度、pH稳定性、热稳定性、模拟胃液稳定性、模拟肠液释放行为以及保存稳定性进行分析。结果显示,当阳离子醚化淀粉浓度为2.4%、海藻酸钠浓度为2%、黄原胶浓度为1%、壳寡糖浓度为0.6%时,微囊化SP4噬菌体微球外形规则,包封率为97.5%,在pH5.0~8.0、温度10~30℃、模拟胃液pH2.0、0~30 min和pH3.0、0~150 min噬菌体保持较高的生物学活性,模拟肠液中4 h,噬菌体完全释放,4℃环境下保存6周噬菌体效价无明显降低。综上表明,微囊化沙门菌SP4噬菌体显著提高了噬菌体的稳定性和缓释性能,其耐酸特性利于抵御胃酸的分解,具有应用于生物防治的潜力,为进一步采用多因素试验制备微囊化沙门菌SP4噬菌体奠定了基础。     

E_1级麻屑板用脲醛树脂胶的研究

根据亚麻屑的胶接特性,从脲醛胶的固体含量、粘度、游离甲醛、耐水性、固化时间、施工胶液特性及经济效益等方面系统地研究了适合低甲醛释放量麻屑板生产用脲醛树脂胶的物理力学及化学性能。研究结果表明,使用改进的脲醛树脂胶(命名为DN—9号和DN—11号低毒腮醛胶)可以压制出甲醛释放量小于10mg/100g的E1级麻屑板,其物理力学性能达到GB 4896—4905—35标准     

Leaf-litter decomposition of 15 tree species in a lowland tropical rain forest in Sarawak: dynamics of carbon,nutrients, and organic constituents

The effects of tree species on the dynamics of nutrient transformations during leaf-litter decomposition are not well understood in tropical rain forests. To examine differences in the dynamics of C, nutrients, and organic constituents during decomposition among tree species, the leaf-litter decomposition of 15 trees was assessed using a litter-bag method in a lowland tropical rain forest in Sarawak. The dynamics of C was parallel to that of weight loss. The dynamics of nutrients were grouped into three patterns. The dynamics of K was characterized by a high leaching loss in the initial stages, and that of Ca and Mg generally showed a gradual decrease over the course of decomposition. The dynamics of N and P showed highly different patterns with the weight loss, and was characterized by relatively higher remaining mass at the end of the experiment. The variations or exceptions of nutrient dynamics among tree species were considered to be related to the initial concentration of each nutrient. For the dynamics of organic constituents, water-soluble carbohydrates disappeared quickly at the initial stages, and acid-soluble carbohydrates were the second fastest decomposing fraction; the decomposition of acid-insoluble residue (AIS) was the slowest. The release of limiting nutrients (N and P) generally followed the disappearance of AIS, but was independent of the disappearance of AIS when the initial concentrations of these nutrients were very low.     

内应力释放对刨花板尺寸稳定性的影响分析

研究了热压过程中内应力的形成机理和板材内部应力状态,探讨了内应力释放对刨花板尺寸稳定性的影响,提出了减小内应力和提高尺寸稳定性的工艺措施.刨花板会发生变形,即尺寸不稳定,源于以下两个基本原因:(1)构成刨花板主体单元的木材有吸湿性;(2)刨花板在热压过程中产生了内应力即残余应力.刨花板内应力释放时,人们可以实实在在地感觉到,例如:刨花板热压结束后,卸板时板坯内会传出嘣、嘣、嘣的声音,或者是规整而无变形的刨花板在开料后会发现有翘曲变形出现.这就是残存在刨花板内部的应力在释放.本文根据木材传热传质的理论、应力松驰理论、相平衡理论对刨花板内应力形成机理和应力状态及内应力释放对刨花板尺寸稳定性的影响进行分析和研究,为生产提供理论指导.     

基于表面建模技术的数控车床动态加工仿真模型研究

在充分考虑数控车床加工表面特征的基础上,对以往仿真模型的不足进行了分析,提出了基于螺旋曲面的加工表面模型。该模型充分考虑了数控程序中主轴转速和进给速率两个重要参数,并提出了数控车床动态加工过程仿真的时间驱动机制。     

人造板游离甲醛释放量测定的主要影响因素的研究

试验表明，人造板在存放过程中，板材的游离甲醛释放量逐渐下降并趋于稳定。在测定中的萃取时间、样品大小、甲苯的重复使用对测定结果都有一定的影响。     

加速数控机床开发全面实现家具现代化生产

分析了我国家具生产数控技术应用的现状及存在的问题,提出木工机械制造业应抓住机遇充分利用现有科技资源,开发适合我国家具生产的数控木工机床,尽快普及数控技术,实现家具生产的现代化.