薄型高密度纤维板生产设备的要求分析

对薄型中高密度纤维板生产设备的要求作了简要分析。

Abstract：

A brief analysis is made of the requirements for thin medium high density fiberboard product manufacturing equipment.     

种植密度对滴灌马铃薯生长、产量的影响

为了了解耕培土滴灌条件下种植密度对马铃薯生长、产量以及水分利用效率的影响.试验共设密度分别为7.28×10⁴ 株/hm²(RS25),6.67×10⁴ 株/hm²(RS35),5.55×10⁴ 株/hm²(CK)3个处理.结果表明:随着种植密度的增加,株高、茎粗、干物质积累量以及商品薯率均有降低的趋势;产量、水分利用效率随种植密度的增加表现出先增大后减少,其中RS35处理产量和水分利用效率均表现最高,分别达到47 325 kg/hm²和12.05 kg/m³;在马铃薯品质方面,种植密度对马铃薯粗蛋白含量的影响不具有统计学意义;淀粉和维生素C随着密度的大幅增加而降低,其中RS25处理的淀粉较CK降低了5.57%,RS25处理的维生素C较CK降低了7.96%,同时RS35与CK处理不具有统计学意义.综上所述,种植密度为6.67×10⁴ 株/hm²的RS35处理马铃薯高产优质,且水分利用效率最高,为黑龙江地区滴灌马铃薯较为适宜的种植密度.     

史密斯桉造林密度与施肥模式研究

针对史密斯桉造林密度与施肥模式进行了研究，对试验地设置3种造林密度作主区，4种施肥模式作副区。对17个月生史密斯桉的试验调查进行分析，结果表明：造林密度对树高生长量的影响差异不显著，而对胸径影响差异显著，适宜密度为2000株·hm^-2。施肥对史密斯桉幼树树高、胸径生长的影响极显著，不同的施肥模式对史密斯桉幼林生长的效果是：桉树专用肥>复混肥+微肥>复混肥+磷肥+微肥>复混肥+磷肥。     

密度与环境因子对蒙古黄芪育苗影响研究

为了明确育苗时密度与环境因子对蒙古黄芪生长特征影响,本试验以蒙古黄芪为研究对象,通过单因素田间随机区组试验,测定蒙古黄芪株高、茎粗、根粗和根长4个指标。结果表明,密度对蒙古黄芪影响最大,其次是湿度,最后是光照和电导率。密度与蒙古黄芪株高、茎粗、根粗呈现负相关性,与根长呈正相关性(P<0.05),密度为400株/m ²时,株高、茎粗及根粗最大,密度为1000株/m ²时根长最大。     

Short time effects of biological and inter-row subsoiling on yield of potatoes grown on a loamy sand,and on soil penetration resistance,root growth and nitrogen uptake

Soil compaction, especially subsoil compaction, in agricultural fields has increased due to widespread use of heavy machines and intensification of vehicular traffic. Subsoil compaction changes the relative distribution of roots between soil layers and may restrict root development to the upper part of the soil profile, limiting water and mineral availability. This study investigated the direct effects of inter-row subsoiling, biological subsoiling and a combination of these two methods on soil penetration resistance, root length density, nitrogen uptake and yield. In field experiments with potatoes in 2013 and 2014, inter-row subsoiling (subsoiler) and biological subsoiling (preceding crops) were studied as two potential methods to reduce soil penetration resistance. Inter-row subsoiling was carried out post planting and the preceding crops were established one year, or in one case two years, prior to planting. Soil resistance was determined with a penetrometer three weeks after the potatoes were planted and root length density was measured after soil core sampling 2 months after emergence. Nitrogen uptake was determined in haulm (at haulm killing) and tubers (at harvest). Inter-row subsoiling had the greatest effect on soil penetration resistance, whereas biological subsoiling showed no effects. Root length density (RDL) in the combined treatment was higher than in the separate inter-row and biological subsoiling treatments and the control, whereas for the separate inter-row and biological subsoiling treatments, RLD was higher than in the control. Nitrogen uptake increased with inter-row subsoiling and was significantly higher than in the biological subsoiling and control treatments. However, in these experiments with a good supply of nutrients and water, no yield differences between any treatments were observed.     

AM80-0.2Sr-1.5Ca镁合金高温压缩过程动态再结晶模拟

在Gleeble-1500热压缩实验机上对AM80-0.2Sr-1.5Ca镁合金进行高温压缩实验，得到了该合金在温度为300~450 ℃、应变速率为0.01~1 s-1条件下的流变应力曲线.结合改进的Laasraoui-Jonas（L-J）位错密度模型和Kock-Mecking（K-M）位错密度模型，获得AM80-0.2Sr-1.5Ca镁合金在改进的L-J位错密度模型中的应变硬化参数和应变软化参数，建立该合金的动态再结晶模型.利用DEFORM-3D软件，实现了对AM80-0.2Sr-1.5Ca镁合金在450 ℃热压缩实验时微观组织演变和位错密度变化过程的有限元模拟，并与实际热压缩实验微观组织进行对比.研究结果表明：在相同的温度和应变量下，应变速率较低时，AM80-0.2Sr-1.5Ca镁合金组织粗大且晶粒分布不均，随着应变速率增大，再结晶组织细小均匀模拟与实验结果一致，说明求解的应变硬化参数和应变软化参数准确，所建立的动态再结晶模型能准确预测该合金高温压缩过程动态再结晶过程.     

Dense planting with less basal nitrogen fertilization might benefit rice cropping for high yield with less environmental impacts

Dense planting and less basal nitrogen (N) fertilization have been recommended to further increase rice (Oryza sativa L.) grain yield and N use efficiency (NUE), respectively. The objective of this study was to evaluate the integrative impacts of dense planting with reduced basal N application (DR) on rice yield, NUE and greenhouse gas (GHG) emissions. Field experiments with one conventional sparse planting (CK) and four treatments of dense planting (increased seedlings per hill) with less basal N application were conducted in northeast China from 2012 to 2013. In addition, a two-factor experiment was conducted to isolate the effect of planting density and basal N rate on CH₄ emission in 2013. Our results show that an increase in planting density by about 50% with a correspondingly reduction in basal N rate by about 30% (DR1 and DR2) enhanced NUE by 14.3–50.6% and rice grain yield by 0.5–7.4% over CK. Meanwhile, DR1 and DR2 reduced GWP by 6.4–12.6% and yield-scaled GWP by 7.0–17.0% over CK. According to the two-factor experiment, soil CH₄ production and oxidation and CH₄ emission were not affected by planting density. However, reduced basal N rate decreased CH₄ emission due to it significantly reduced soil CH₄ production with a smaller reduction in soil CH₄ oxidation. The above results indicate that moderate dense planting with less basal N application might be an environment friendly mode for rice cropping for high yield and NUE with less GHG emissions.     

新疆甜菜丸粒化单粒种高密高产高糖栽培模式

在新疆适宜种植甜菜的生态区,通过选择甜菜丸粒化单粒种,在高密度种植条件下,依据不同栽培管理阶段特点采用合理的管理措施,以实现甜菜单产97.5～105.0t/hm2、含糖率15%以上的目标,从而构建甜菜丸粒化单粒种高密高产高糖栽培模式。     

桑叶养猪实用技术

桑叶养猪实用技术分为桑树种植技术和桑叶干粉发酵养猪技术两个部分。利用荒地种植桑树,降低生猪养殖饲养成本,桑叶养猪种养结合,成为生态农业典范。桑叶干粉发酵技术,提高了桑叶干粉的可消化率和饲料功能。桑叶干粉发酵料占配方6%~10%,做成桑叶猪饲料,替代3%~5%鱼粉、豆粕等蛋白质饲料,节约了饲料成本。桑叶喂养猪(简称桑叶猪,下同)的猪肉中含有肌苷酸等风味物质,显著提高猪肉胴体品质和猪肉风味。设计猪尿处理,采用红泥膜沼气池降解工程工艺应用后,降解水兑2倍清水对桑树喷灌工艺,减少人工处理劳力和成本费用。设计10%抗非洲猪瘟中药饲料添加剂+桑叶饲料,预期防治非洲猪瘟总效果85%以上。桑叶养猪实用技术可行,供同行参考。     

防洪堤施工中筑堤粗粒土控制干密度的合理性分析

文章对相对密度控制问题进行分析,并提出几点建议。