He—Ne激光照射对牛超排效果的影响机理

试验采用Ｈｅ－Ｎｅ激光穴位照射供体母牛，并结合纯化ＦＳＨ超排处理，以研究激光照射对牛超排效果的影响机理。结果表明：①Ｈｅ－Ｎｅ激光照射可提高牛超排效果，增加胚胎数和可用胚胎数，试验组头均胚胎数比对照组多２．２枚，头均可用胚胎数比对照组多１．９枚，差异显著（ｐ〈０．０５）；②Ｈｅ－Ｎｅ激光照射通过神经和体液调节，可显著提高血浆中ＦＳＨ（促卵泡素）水平，而ＦＳＨ水平升高是促使供体母牛卵泡发育，增加胚胎     

Cutting weeds with a CO2 laser

Stems of Chenopodium album . and Sinapis arvensis . and leaves of Lolium perenne . were cut with a CO₂ laser or with a pair of scissors. Treatments were carried out on greenhouse-grown pot plants at three different growth stages and at two heights. Plant dry matter was measured 2 to 5 weeks after treatment. The relationship between dry weight and laser energy was analysed using a non-linear dose–response regression model. The regression parameters differed significantly between the weed species. At all growth stages and heights S. arvensis was more difficult to cut with a CO₂ laser than C. album . When stems were cut below the meristems, 0.9 and 2.3 J mm⁻¹ of CO₂ laser energy dose was sufficient to reduce by 90% the biomass of C. album and S. arvensis respectively. Regrowth appeared when dicotyledonous plant stems were cut above meristems, indicating that it is important to cut close to the soil surface to obtain a significant effect. When cutting L. perenne plants with 2-true leaves at a height of 2 cm from the soil surface with a laser, the biomass decreased significantly compared with plants cut by scissors, indicating a delay in regrowth. This delay was not observed for the dicotyledonous plants nor for the other growth stages of L. perenne .     

Treatment of equine glaucoma by transscleral neodymium:yttrium aluminum garnet laser cyclophotocoagulation: a retrospective study of 23 eyes of 16 horses

Contact neodymium:yttrium aluminum garnet (Nd:YAG) laser transscleral cyclophotocoagulation (TSCP) was performed on 23 eyes of 16 horses for treatment of glaucoma. The mean highest preoperative IOP was 51 ± 17 mmHg. Follow-up evaluation was available for 19 eyes 1 day after surgery, 14 eyes from 1 to 2 weeks, 16 eyes from 4 to 6 weeks, 9 eyes from 12 to 16 weeks, and 10 eyes greater than 20 weeks after laser treatment. The mean intraocular pressure (IOP) the day following surgery was 34 ± 13 mmHg. The mean IOP for each follow-up period was: one to two weeks postoperative, 23 ± 9 mmHg; four to six weeks, 24 ± 7 mmHg; 12–16 weeks, 28 ± 10 mmHg; and  20 weeks, 22 ± 9 mmHg. IOP measurements were significantly different from pretreatment values for all follow-up intervals except for weeks 12–16 ( P < 0.05). Treatment success was defined as maintenance of IOP < 30 mmHg. Treatment success was achieved in 93%, 88%, 78%, and 70% of the treated eyes at the 1–2 weeks, 4–6 weeks, 12–16 weeks, and the  20 weeks re-evaluation, respectively. No significant difference was found between the number of eyes visual at presentation (52.2%) and visual at 20 weeks (60%). The most common laser complications were conjunctival hyperemia (21.7%) and corneal ulcers (13.0%). Results of this study indicate that Nd:YAG TSCP is an effective method of controlling IOP and preserving vision in horses with glaucoma. An effective Nd:YAG laser protocol for TSCP in the equine glaucomatous eye is a power setting of 11 W, duration of 0.4 s, applied 5 mm posterior to the limbus at 60 sites, resulting in a total energy dose of 264 J.     

Comparison of methods to assess dog owners' therapeutic compliance

Objective To compare different methods for assessing the compliance of veterinary clients administering medication to their dogs.
Procedure Thirty-one owners whose dogs were prescribed amoxycillin-clavulanate, twice and thrice daily, for a duration of five to seven days were recruited from three Sydney veterinary hospitals. Compliance was assessed by electronic monitoring devices, return medication counts, client self-reports and veterinarians' estimation of likely compliance.
Results Electronic monitoring showed owners administered on average 84% (range 7 to 104%) of prescribed medication to their dogs. Both return medication counts and client self-reports tended to overestimate therapeutic compliance when compared with electronic monitoring. When questioned, the majority of owners (71%) claimed perfect compliance with the prescribed regimen. No correlation was found between veterinarians' estimates of owner compliance and that assessed electronically.
Conclusion Electronic monitoring provided valuable information on dose timing and variation, but proved costly and difficult to employ in veterinary practice. Simplicity and low cost of return medication counts makes this method attractive for use in veterinary compliance studies. Client self-reports reliably detected some noncompliers and permitted identification of individual problems or errors. For practical purposes a combination of return medication counts and client self-reports may have merit in future veterinary compliance studies.     

Histological investigation of stripe rust (Puccinia striiformis f.sp. tritici) development in resistant and susceptible wheat cultivars

The wheat cultivar Kariega expresses complete adult plant resistance against stripe rust, whereas cv. Avocet S is susceptible. Using confocal laser scanning microscopy, initial fungal penetration into flag leaves was identical in both cultivars, with directional germ-tube growth towards stomata that were penetrated without the formation of an appressorium, followed by differentiation of a substomatal vesicle, infection hyphae, haustorial mother cells and haustoria. During the following 4 days, further fungal development occurred more quickly in the resistant than in the susceptible cultivar. However, by 7 days postinoculation (dpi) the situation changed, with exponential growth of the pathogen occurring only in the susceptible line. Induced cellular lignification, a typical defence reaction of cereals, was observed at 4 dpi in the resistant cultivar, and 2 days later lignified tissue completely surrounded the fungal colonies. In the susceptible cultivar, isolated lignified host cells occurred at 6 dpi, and long, unbranched fungal hyphae outgrowing the resistance reaction were observed.     

A spatially-explicit method to assess the dry deposition of air pollution by urban forests in the city of Florence,Italy

Urban forests (UF) provide a range of important ecosystem services (ES) for human well-being. Relevant ES delivered by UF include urban temperature regulation, runoff mitigation, noise reduction, recreation, and air purification. In this study the potential of air pollution removal by UF in the city of Florence (Italy) was investigated. Two main air pollutants were considered – particulate matter (PM₁₀) and tropospheric ozone (O₃) – with the aim of providing a methodological framework for mapping air pollutant removal by UF and assessing the percent removal of air pollutant.The distribution of UF was mapped by high spatial resolution remote sensing data and classified into seven forest categories. The Leaf Area Index (LAI) was estimated spatially using a regression model between in-field LAI survey and Airborne Laser Scanning data and it was found to be in good linear agreement with estimates from ground-based measurements (R² = 0.88 and RMSE% = 11%). We applied pollution deposition equations by using pollution concentrations measured at urban monitoring stations and then estimated the pollutant removal potential of the UF: annual O₃ and PM₁₀ removal accounted for 77.9 t and 171.3 t, respectively. O₃ and PM₁₀ removal rates by evergreen broadleaves (16.1 and 27.3 g/m²), conifers (10.9 and 28.5 g/m²), and mixed evergreen species (15.8 and 31.7 g/m²) were higher than by deciduous broadleaf stands (4.1 and 10 g/m²). However, deciduous forests exhibited the largest total removal due to the high percentage of tree cover within the city. The present study confirms that UF play an important role in air purification in Mediterranean cities as they can remove monthly up to 5% of O₃ and 13% of PM₁₀.     

高功率激光系统中空间滤波器的程序编码

提出了建立大型激光装置的程序编码的初步方案及需要开展的计算机编码工作内容，并完成了空间滤波器系统的Ｆｏｕｒｉｅｒ编码模块，给出了计算图样 。     

Economic utility of 3D remote sensing data for estimation of site index in Nordic commercial forest inventories: a comparison of airborne laser scanning,digital aerial photogrammetry and conventional practices

ABSTRACT

Forest productivity is a crucial variable in forest planning, usually expressed as site index (SI). In Nordic commercial forest inventories, SI is commonly estimated by a combination of aerial image interpretation, field assessment and information obtained from previous inventories. Airborne laser scanning (ALS) and digital aerial photogrammetry (DAP) data can alternatively be used for SI estimation, however the economic utilities of the inventory methods have not been compared. We compared seven methods of SI estimation in a cost-plus-loss analysis, by which we added the expected economic losses due to sub-optimal treatment decisions to the inventory costs. The methods comprised direct and indirect estimation from combinations of ALS, DAP and stand register data, and manual interpretation from aerial imagery supported by field assessment and information from previous inventories (conventional practices). The choice of method had great impact on both the accuracy and the economic value of the produced estimates. Direct methods using bitemporal ALS and DAP data gave the best accuracy and the smallest total cost. DAP was a suitable and low-cost data source for SI estimation. Estimation from single-date ALS and DAP data and age obtained from the stand register provided practical alternatives when applied to even-aged stands.     

Crack formation due to weathering of radial and tangential sections of pine and spruce

The development of cracks and changes in appearance have been investigated on radial and tangential sections of pine (Pinus sylvestris L.) and spruce (Picea abies Karst.) after exposure outdoors for 61 months. The degradation of the sections has also been studied at the micro-level. The annual ring orientation was the most important factor affecting crack development on weathering. After 61 months of outdoor exposure, the tangential sections of spruce had 1.7-2.2 times greater mean total crack length per area unit than the corresponding radial sections. In pine, the total crack length per area unit on the tangential sections was 2.2-2.6 times greater than that on the radial sections. Tangential and radial sections show the same colour change as a result of weathering. Tangential sections have more and deeper cracks than radial surfaces. The cracks on the tangential sections occur frequently in both earlywood and latewood. On radial sections, cracks occur primarily at the annual ring borders, but to a certain extent also in the earlywood. Decomposition of the cell wall takes place in both radial and tangential cell walls, and cracks tend to follow the fibril orientation in the S2-layer of the cell wall. The radial cell wall of the earlywood has a large number of pits which are degraded at an early stage.