新型腐植酸有机肥对马铃薯茎基腐病的防效

马铃薯茎基腐病是影响马铃薯生产的重要病害,目前尚未有效的综合防控措施.试验的目的是通过新型腐植酸肥料与同等养分配方化肥的田间比较试验,探讨新型腐植酸有机肥对马铃薯茎基腐病预防效果.结果表明,5～15 g壤动FT/100 kg种薯配合腐植酸肥料对马铃薯生长发育安全,在出苗率、苗高、单株根数、最大根长、芽长分别优于配方化肥...     

基于离散元的柔性作物茎秆振动响应仿真

建立考虑柔性作物茎秆振动响应特性的动力学模型,对探索谷草分离机理、分析谷物分离过程和联合收获机参数优化具有重要意义。本文提出考虑柔性作物茎秆振动响应特性的动力学仿真模型,研究了作物茎秆的动力学响应特性。首先,给出了作物柔性茎秆的动力学模型和动力仿真方法;以成熟期小麦第3节间为例,测量了茎秆的内外径、单位质量密度和弹性模量等参数;对茎秆的横向弯曲振动和纵向拉伸振动进行仿真,研究茎秆的动力学响应特性,并与理论计算结果进行比较。通过仿真获得长度108mm、外径3.7mm、内径1.9mm、弹性模量5.27GPa的小麦茎秆的横向振动频率和纵向振动频率分别为164.28、7633.59Hz,与理论计算结果的相对误差分别为0.28%和0.12%。最后,通过谷草分离仿真实验,验证了柔性作物茎秆模型的实用性。     

利凉处理对大棚环境、秋番茄生长与结果及其茎基腐病的影响

为验证利凉的应用效果,采用大田试验方法,研究利凉处理下大棚环境、秋番茄生长、结果和茎基腐病的状况。结果表明：在晴天和阴天条件下,利凉处理棚膜均起到降低大棚内的地温、气温和光照强度的作用,同时可提高大棚内的空气相对湿度,为秋番茄生长提供良好的环境条件。与对照大棚相比,利凉处理大棚提高了秋番茄植株的生长速率,可使秋番茄第一花序坐果率提高18.51%,第一层果实产量提高82.66%,同时可降低大棚秋番茄茎基腐病的发病率达15.28%。综上,利凉可以在大棚秋番茄生产上应用。     

辣木的染色体制片优化及核型分析

以辣木分生组织为材料,采用酶解去壁低渗法制片,探讨不同取材部位、预处理方式和酶解时间对辣木染色体制片的影响,并对其进行核型分析,以期为辣木的起源、演化及遗传育种提供一定理论依据。结果表明:以辣木新枝茎尖为最佳取材部位,用饱和对二氯苯预处理2 h,再用4%纤维素酶和5%果胶酶混合物酶解4 h,制片所得染色体效果最佳。核型分析表明,辣木染色体属于小染色体,有28条,核型公式为2n=2x=2n=28m,属于1B类型,核型不对称系数60.29%,核型对称程度较高,这表明辣木在进化中可能处于比较原始类型。     

水肥一体化对山地鲜桑椹商品性状的影响

为探索不同为微地形条件下水肥一体化工程技术对干热河谷区桑园果桑商品性状的影响,以盐边县刚成熟、正成熟和过成熟的鲜桑椹为研究对象,对比坡面雨养区(DN)、沟道两旁雨养区(WN)、坡面（水肥一体化）灌溉施肥区(DF)和沟道两旁（水肥一体化）灌溉施肥区(WF)桑椹的果长、果径、体积、质量、密度、果形指数和糖度的差异。结果表明：（1）灌溉施肥可以影响桑椹结果的物候特征,加速桑椹成熟。（2）灌溉施肥、微地形、灌溉施肥和微地形的交互作用对鲜桑椹的果长、果径、体积和果形指数具有极显著影响。（3）成熟度可以显著影响鲜桑椹的果长、果径和体积,但对鲜桑椹果形指数的影响不显著。 （4）在灌溉施肥条件(DF、WF)下,桑椹的成熟度越高,其密度和质量越高;在DN区,过成熟桑椹的密度和质量显著高于刚成熟和正成熟的桑椹;而在WN区,正成熟桑椹的密度质量显著高于过成熟和刚成熟的桑椹密度。（5）平均糖度最高的为WF区的过成熟桑椹,平均糖度高达18.01%,而最低的为WN区的刚成熟桑椹,平均糖度仅为11.76%。（6）DN区和WN区桑椹的商品性状的差异主要是外形和糖度的差异,WN区的桑椹比DN区糖度低、外形大。（7）WF区桑椹与DF区桑椹的商品性状差异不大。上述结果揭示了水分和养分供给调控桑椹商品性状的内在机制,即水分供应可促进鲜桑椹变大变重,施肥可让鲜桑椹口味更甜。     

茎用芥菜新品种1年2代繁育研究初报

为了探索福建省茎用芥菜1年2代繁育技术,选择6个茎用芥菜品种,分别进行冬春季正常繁育和夏秋季高山加代繁育的2代繁育试验,并对比各品种2代繁育的生育期、株高、株幅和种子产量。结果表明：所有参试茎用芥菜品种只要通过打破种子休眠、衔接好2代繁育的播种期都能完成1周年2代繁育,夏秋季高山加代繁育的全生育期比冬春季正常繁育平均缩短约50 d;冬春季繁育比夏秋季高山加代繁育株高增加31.2%～132.9%,株幅增加1.5%～21.8%,所有参试品种冬春季繁育的种子产量都极显著高于相应夏秋季高山加代繁育,种子产量增加17.8%～153.6%。     

Strategy to identify resistance to white mould associated with high yield for irrigated common bean in Brazil

Development of common bean cultivars with partial white mould resistance through breeding techniques has been a challenge in Brazil. As yet, lines/cultivars from breeding programmes have not been investigated for resistance; therefore, this study screened 107 lines/cultivars for their reactions to white mould in 14 preliminary trials conducted under irrigation. Thirteen resistant lines/cultivars (three of Andean origin) and six Mesoamerican cultivars (three intermediately resistant and three susceptible) were selected for further investigation. These lines/cultivars and the resistant control A195 were evaluated in six advanced trials and two straw tests to assess the effectiveness of the screening procedure. In 11 preliminary trials, screenings were performed under moderate/high or higher disease pressure. These pressures occurred in two advanced trials in which, when yields were averaged across moderate/high and high pressures, 10 Mesoamerican lines/cultivars selected for resistance yielded 14%, 23%, and 38% more than intermediately resistant cultivars, A195, and susceptible cultivars, with median disease ratings (1–9 scale) of 4.5, 5.7, 5.7, and 6.7, respectively. In the straw test, three Andean lines/cultivars (A195 included) and two susceptible cultivars in the field were among those with the highest levels of physiological resistance. Thus, field rating under high disease pressure and greenhouse rating did not correlate significantly, suggesting that field trials are critical to evaluating resistance and to identifying high-yielding beans. Therefore, lines/cultivars from breeding programmes assessed in field trials may provide a low cost and fast way to identify high-yielding bean cultivars with partial resistance to white mould in the subtropical southern hemisphere.     

Banishing barberry: The history of Berberis vulgaris prevalence and wheat stem rust incidence across Britain

Wheat stem rust, caused by the fungus Puccinia graminis f. sp. tritici (Pgt), is a notoriously damaging disease of wheat and barley. Pgt requires two hosts to complete its lifecycle; undergoing asexual reproduction on cereal crops and completing sexual reproduction on Berberis spp. The latter stage of its lifecycle is of particular importance in temperate regions such as western Europe, where asexual urediniospores are unable to survive cold winter weather. In the past, the crucial role of Berberis in the lifecycle of stem rust led to intensive eradication campaigns, initially carried out by farmers in the face of hostile scientific opinion. In the United Kingdom, common barberry (Berberis vulgaris) is today a relatively rare plant. Stem rust is, however, currently experiencing a resurgence; at the same time, there has been a general increase in the prevalence of barberry and an upsurge in its planting which, in the United Kingdom, is associated with attempts to encourage the endangered barberry carpet moth (Pareulype berberata). This article situates current developments within a broader chronological framework, examining changing attitudes towards barberry and rust in England in the past and the history of the plant's use and cultivation. It assesses how widespread B. vulgaris really was in the environment historically, and thus the scale of its eradication. We suggest that Berberis was never widely established as an archaeophyte in the United Kingdom. Current attempts to re-establish it are based on a misunderstanding of the plant's historical status and could potentially pose a serious threat to food security.     

甜玉米茎秆强度相关性状的数量性状基因座定位

为选育抗倒伏玉米品种,挖掘甜玉米茎秆强度相关性状的数量性状基因座（quantitative trait locus,QTL）,应用复合区间作图法以甜玉米组合T49×T56的F₂为作图群体,通过测定F_2：3家系的茎秆穿刺强度、茎秆抗压强度和茎秆弯折性能3个性状进行相关性状的QTL定位。结果表明,遗传连锁图谱包含153个SSR标记位点,覆盖玉米基因组1 199.1 cM,平均图距7.83 cM。3个性状共检测到10个QTL,其中与茎秆穿刺强度相关的2个QTL位于第3、7染色体上,解释11.81%和22.15%的表型变异,与茎秆抗压强度相关的4个QTL位于第1、3、7染色体上,单个QTL可解释3.68%~33.26%的表型变异,与茎秆弯折性能相关的4个QTL位于第3、6、8染色体上,单个QTL可解释3.55%~18.58%的表型变异。第7染色体检测到1个同时控制茎秆穿刺强度和茎秆抗压强度2个性状的QTL,位于umc1015~umc1987标记区间,分别可解释11.81%和33.26%的表型变异,第3染色体检测到1个同时控制茎秆穿刺强度、茎秆抗压强度、茎秆弯折性能3个性状的QTL,位于umc1400~dupssr23标记区间,分别可解释22.15%、13.27%和18.58%的表型变异。3个茎秆强度性状共同检测到的主效QTL,可在育种实践中用于分子标记辅助选择和抗倒伏玉米品种的选育。     

油棕叶梗重组方材制备工艺

以油棕叶梗为原材料、酚醛树脂为胶黏剂,采用正交试验方法研究重组方材密度、施胶量、热压时间和热压温度对油棕叶梗重组方材力学性能的影响。结果表明,密度对油棕叶梗重组方材性能的影响较大,密度和施胶量越大,重组方材力学性能越好;热压温度和热压时间对油棕叶梗重组方材性能的影响比较复杂。综合考虑确定油棕叶梗重组方材的较优制备工艺条件为:密度0.7 g/cm³,施胶量12%,热压温度180℃,热压时间40 min;较优工艺条件下油棕叶梗重组方材的弹性模量为7 185 MPa,静曲强度为68.7 MPa,顺纹抗压强度为35 MPa,内结合强度为0.21 MPa。密度为0.7 g/cm³的油棕叶梗重组方材的弹性模量、静曲强度、顺纹抗压强度高于了杉木的性能。