条形浅基础极限承载力的滑移线解

当网格剖分足够密时，采用差分解法可得到具有足够精度的有重土静力极限平衡数值解。根据大量计算分析，揭示了有效旁侧荷载宽度L、无量纲极限承载力 / 与内摩擦角 、无量纲参数λ的内在规律，据此将滑移线法数值解拟合为简洁的解析表达式，并在理论上证明了这一规律。通过与几种经典承载力公式的比较和分析，综合对该拟合公式的可靠度分析，论证了其正确性和可行性。     

春小麦耐热性的筛选方法与指标

利用５１份春小麦材料对３种耐热性方法进行了研究评价。供试材料在田间通过晚播计算各基因型的粒重感热指数（Ｓｅ）或于籽粒浆期用塑料简棚进行遮盖处理并计算千料重感热指数（Ｓｇ）评价其耐热性，而在室骨采用膜热稳定性测定方法，以相对热损伤率（ＲＩ％）大小评价基因型的耐热性。相关分析表明：Ｓｅ在年际间和年份内的相关系数均呈极显著高度正相关，从而具有较好的重演性，而ＲＩ％与Ｓｇ呈显著正相关说明基因型的热稳定性大     

金针菇多糖的提取及含量测定

探讨了用温度70℃热水提取、sevag法除蛋白、乙醇分级沉淀提取金针菇多糖,以及用硫酸-蒽酮法测定其含量的方法。该方法测得多糖的总收率为金针菇湿质量的0.11%,测定多糖的线性范围为1～16μg/mL,对金针菇多糖含量测得的RSD小于2.24%,回收率为97.6%～102.8%。     

A Mininum Ring-band Mathematical Definition, Numerical Algorithm

A minimum ring-band mathematical definition :In the done ring-band, there are at least two inner points and two outer points which scatter staggeringly on the circumference. With this definition as the rule of searching calculation' s ending,a fast numerical algorithm of gaining the minimum ring-band of a closed curve was suggested:Make a ring-band with the four points scattered staggeringly,then replace the old points with new ones continuously until all the points are located within the ring-band. The method was used in an application example to measure the spindle rotating precision of machine tools.     

Distributed Power Flow Method Based on Ward Equivalent

With interconnecting and developing of power system, the problem of power flow computation on dispersed data resource need to be solved. A new distributed computation method of power flow based on Ward equivalent is presented. According to master-slaver splitting principle, multi-area interconnected power system is divided into master-slaver areas. Boundary buses in different areas are defined as different bus-types. Neighborhood areas are equivalent by Ward equivalent principle, and the equivalent injection power and equivalent impedance are worked out. Power flows from master area to slaver areas are solved by Newton method, and the equivalent injection power and equivalent impedance on the boundary are modified by their solutions. The process above repeats until to convergence. The proposed distributed power flow method takes full advantage of the information of power, voltage, network configuration in neighborhood areas, so it is better on convergence and quality of solution. The proposed algorithm is testified by IEEE 14-bus system and a practical 181-bus system.     

VISAR Data Reducing Method and Its Application to Impact Experiment

Identification and adjustment on the disfigurements of original data of VISAR are probed by developing software for VISAR data reducing based on measure theory. Then the software is applied to plate impact experiment of ceramics. The disfigurements of light intensity data are identified and adjusted through Lissajou~ figures. The results indicate that VISAR data are reduced quickly and effectively by the software, and the exact free surface velocity history is obtained.     

Two-level Fuzzy Method for Evaluation of the Supplier''s System in Automobile Industry

This paper analyses the importance of the suppliers' evaluation in automobile industry. Based the conception of system, all the corporations' suppliers are regarded as an integer. On condition that the corporation has evaluated the single supplier's performance, the model for evaluate the performance of supplier's system is established, the performance by two-level fuzzy method is evaluated. Finally, the method sets with an example as the illustration.     

Effect of the Silicic Acid Polymerization Degree on the Coagulating Property of Polyalumium Silicate Chloride

Polyaluminum silicate is a new type of inorganic macromolecular flocculants, which is developed as a complex product in recent years on the base of polyalumium flocculant and polysilicic acid flocculant. Sodium silicate is diluted to the concentration of 3.0% SiO 2 with distilled water. The solution was adjusted to pH 4.5 with sulphate acid and kept at quiescency for different time to get polysilicic acid with different polymerization degrees. Using polysilicic acid prepared and aluminium chloride as materials, a series of polyaluminium silicate chlorides(PASC) with different basicities(B), Al/Si molar ratios and polymerization degree of silicic acid are prepared by copolymerization technique. The Al-Ferron timed complex colorimetric method is applied to characterize species distribution of PASC and to study its influence factors. The interaction between hydrolyzed aluminum species and polysilicic acid with different polymerization degrees in PASC is discussed.The flocculant prepared is applied to the treatment of commercial concrete wastewater. The turbidity removal of commercial concrete wastewater is up to 97% when a PASC, prepared with polysilicic acid of 145 min polymerization degree.     

Synthetic Application for Analysis Methods of the Planar Mechanism Overconstraints

Overconstraints exist widely in planar closed chain mechanisms and mechanical systems result in a series of detrimental influences on behavior of machines, and attention is given to them by machine designer. Some analysis methods of overconstraints in planar closed chain mechanisms are presented, and more study due to the faultiness of these methods. In accordance with faultiness of two common kind of methods, formulas method and loop analysis method of degrees of freedom, and by combining these two methods, an useful mechanism overconstraints analysis method which is convenient for computer aided overconstraints analysis is gained via research on the two methods thoroughly and systematically, and some new views about mechanism overconstraints analysis are presented.