昆山麻鸭重要遗传种质特性的检测与分析

为了揭示昆山麻鸭的遗传特性,在昆山麻鸭保种场对昆山麻鸭重要遗传种质特性进行了检测,这些性状包括繁殖性能、体尺性状以及肉用性能。同时分别对体尺性状、肉用性状各指标间的表型相关进行了分析。结果表明：体尺性状的变异系数均小于10%,而肉用性能指标的变异系数均超过了10%,说明肉用性能的变异程度大于体尺性状,肉用性能的遗传稳定性差。母鸭的半净膛率和全净膛率差异极显著高于公鸭（P＜0.01）,说明母鸭的出肉率高于公鸭。相关分析结果表明,宰前活重、屠体重、半净膛重、全净膛重、胸肌重间均存在极显著的正相关（P＜0.01）,且相关系数均在0.828以上,全净膛重和半净膛重的相关系数达0997,决定系数（r2）达0.994,全净膛率和半净膛率相关系数达0.990,决定系数达0.98,说明这些性状间的关系密切,选择宰前活重可以间接选择屠体重和全净膛重。     

Study of the live body weight and body characteristics of the African Muscovy duck (<Emphasis Type="Italic">Caraina moschata</Emphasis>)

Three hundred and twenty 1-week old ducklings (160 males and 160 females) were used to evaluate the body weight, body parts and carcass characteristics of the African Muscovy duck. Sexual dimorphism was in favour of the male for all the parameters throughout the experimental period, however the difference was significant (P < 0.05) only after week 2. The 12-week old male weighed 1832.0 ± 180.4 g while the female reached only 68.2% of the male weight. Metatarsus diameter, thoracic perimeter, body length, length of bill, foot and wing in cm were respectively 1.3, 29.5, 57.5, 7.0, 27.1 and 27.8 for the male as compared with 1.2, 25.8, 51.0, 6.3, 23.3 and 26.9 for the female. Body measurements were highly (P < 0.01) correlated with body weight for both sexes, however the highest correlation coefficients were obtained with wing length (0.990 and 0.995) and thoracic perimeter (0.993 and 0.973) for female and male respectively. Live body weight had a linear relationship with both wing length (R² = 0.991 and 0.81) and thoracic perimeter (R² = 0.948 and 0.986) for male and female respectively. The female duck yielded higher percent ready-to-cook carcass (66.3%), breast (13.6%), liver (2.8%), heart (1.5%) and gizzard (3.8%) as compared to the male (65.0%, 12.0%, 2.5%, 1.1% and 3.4% respectively) although the difference was not significant (P > 0.05). The male small intestine (185.1 ± 3.4 cm), colon (14.8 ± 1.0 cm) and caecum (17.9 ± 0.4 cm) were significantly (P < 0.05) longer than that of the female (152.2 ± 1.8, 10.8 ± 0.7 and 14.85 ± 0.6 cm respectively).     

转基因技术影响的知与行:基于农民的调查

通过对山西、天津、湖南、河南4地的调查,浅析转基因技术在农业方面的应用及其利与弊,通过田野调查,了解农民对转基因技术的了解状况和对转基因产品的接纳和包容程度。调查得知,农民由于传统思想、获取信息的能力、接受的教育程度以及政府相关工作等的影响,对转基因的认知程度和态度各不相同。政府应采取加强基础设施建设,加强有关转基因技术和转基因作物的宣传,加派相关技术和指导人员,积极研发自主品牌等措施,消除农民的"恐惧"。     

旋流泵含气混输数值计算及涡室流场探针测量

为探索旋流泵内部流场及气液两相流混输特性,该文通过32WB8-12型旋流泵外特性试验和泵最优工况流场五孔探针测量,得出泵性能曲线和5个测点静压ps、绝对速度v、圆周速度vu、径向速度vr和轴向速度vz分布情况。针对N-S方程中四项力在气液两相流动中的具体表现特性进行力学分析,说明了泵内部两相流动特点及关联因素之间约束关系。阐明了旋流泵含气混输抽吸和扬程形成的基本原理,及空化和气液两相流混输的不同特点。选择性能试验最优工况,基于改进重组化群k-ε湍流模型(RNG k-ε模型),应用Fluent软件对泵内部流场进行数值模拟,得到了3个轴面静压、速度矢量和含气率分布图。证明泵进口轴向运动为主流,气体主要集中在压力较低的进口区域。气相的引入,其微团与液相尺寸、形状及弹性模量的不同,造成两相流场惯性力、摩擦力和浮力发生变化,由此解释了外特性变化及气液抽吸与内部流动之间定性的因果关系。探讨了旋流泵内部气液两相流动速度场和过流通道发生畸变的基本原理,为建立旋流泵内部气液及空化流动模型提供实例。     

Root development in potato and carrot crops – influences of soil compaction

Row crops such as potatoes (Solanum tuberosum L.) and carrots (Daucus carota L.) are of high economic value in the Nordic countries. Their production is becoming more and more specialized, including continuous arable cropping and heavier farm machinery, with increased risk of soil compaction. The result may be restricted root development and economic losses. Potatoes have widely branched adventitious roots, whereas carrots have taproots with fibrous roots extending from them. Under optimal soil conditions, total root length per surface area may reach more than 10 km m^?2 for both species. Maximal root depth is about 140 cm for potato and more than 200 cm in carrots. Most of the root mass is usually distributed within the upper 100 cm, whereof more than 50% may be deeper than 30 cm. Soil compaction causes a dense soil with few large pores, poor drainage and reduced aeration, especially in wet soils with low organic matter content and high proportions of silt or clay. With compacted subsoil layers, roots will be concentrated more in the upper layers and thus explore a smaller soil volume. This will lead to reduced water and nutrient uptake, reduced yields and low nutrient utilization efficiency. In this review article, we describe the interactions between root development and soil conditions for potatoes and carrots, with special focus on sub-optimal conditions caused by soil compaction. We also discuss the effects of tilling strategies, organic material, irrigation and fertilization strategies and controlled traffic systems on root and yield development. To reduce subsoil compaction there is a need to implement practises such as controlled traffic farming, new techniques for ploughing, better timing of soil operations, crop rotations with more perennial crops and supplements of organic material. Moreover, there is a need for a stronger focus on the impacts of farm machinery dimensions.     

Development and experiment of handheld digitalized and multi-functional forest measurement gun

为了实现森林的数字化、多功能、精准计测,该文研制了一种数字化多功能电子测树枪,该设备以MEMS（micro-electro-mechanical systems）测角传感器、激光测距传感器、电子罗盘等主要硬件为基础,通过测量距离、倾角、磁方位角3个参数,基于三角函数原理,嵌入操作软件,实现了树高测量、林分平均高测量、株数密度测量、角规绕测、任意高度直径测量、基本测量6项功能。并将该设备在河南省、内蒙古等地林场进行了试验,试验结果表明,树高测量精度最高,达99.39%,林分平均高测量精度最低,为94.97%,其他功能精度都在95%以上,可以满足林业外业调查的需要。     

便携式猪肉阻抗谱检测系统研制

基于生物阻抗谱检测原理,设计并实现了一个非破坏性的便携式肉品阻抗谱检测系统,主要包括信号发生单元和检测单元,信号源能够在0.1～250 kHz范围内自动扫频,检测单元由检测电极和增益、相位检测器构成。探讨了检测电极设计方案,比较分析了六钢针电极和四针石墨电极的性能,同时通过试验证明了系统的稳定性,1 kHz以上系统的变异系数CV＜6%;以组内相关系数ICC来评定在不同温度下系统的可靠性,系统模型中Ri、Re、C的ICC均大于65%,系统稳定可靠。选取猪肉样品进行了新鲜度指标与阻抗谱关系的初步研究,结果表明随着猪肉新鲜程度改变,猪肉复阻抗值、复阻抗实部值、复阻抗虚部值以及特征频率都表现出减小的趋势。     

Effects of cuvette surface material on ammonia‐, nitrous oxide‐, carbon dioxide‐, and methane‐concentration measurements

Closed‐chamber systems are commonly used to determine gaseous C and N emissions from agricultural soils. We investigated the effects of eight cuvette surfaces on two standard gas concentrations of NH₃, N₂O, CO₂, and CH₄ under laboratory conditions. Cuvette surface materials differentially affected gas adhesion or recovery as a function of the type and the concentration of the gases. Given the strong effects on results of gas measurements in closed‐chamber systems, both the type and the concentration of the measured gases need to be considered in selecting cuvette surface materials.     

自动测量胸径和树高便携设备的研制与测量精度分析

胸径和树高测量是评价立地质量和林木生长状况的重要依据,该文以图像自动识别原理、摄影测量原理、相似三角形几何原理和三角函数原理为理论基础,研制了可测量胸径和树高的多功能便携式微型超站仪,该设备集成电荷藕合器件图像传感器、倾角传感器、激光测距传感器、中央处理器、存储器、液晶显示屏,测量时可获取测站点到待测点的倾角和距离2个参数值,并记录存储测量时的图像信息,通过仪器的嵌入式操作程序,实现胸径的自动测量、树高测量、任意处直径自动测量、基本测量等4项基本功能。通过试验验证,215株立木的单次胸径测量的平均绝对误差为0.369 cm,平均相对误差为2.08%。101株立木的单次树高测量的平均相对误差为1.44%。胸径测量精度达到97.92%,树高测量精度达到98.56%,符合国家森林资源连续清查中的测量精度要求。该设备为森林资源调查提供了参考。     

气候生态因素对烤烟产量与品质的影响及植烟措施研究

江西省烤烟产量与烟碱含量赣南优于赣中和赣北 ,赣南平均产量为 192 0 .0kg/hm2 ,赣中为 1698.0kg/hm2 ,赣北为 170 5.5kg/hm2 ;平均烟碱含量赣南为 2 2 .7g/kg ,赣中为 18.2 g/kg ,赣北为 13 .5g/kg。简析了该省烤烟各生育期气候条件对其产量和品质的影响 ,确定烤烟各生育阶段对光、温、水要求的主次 ,并提出植烟栽培措施。