陆地棉种子物理性状QTL定位

定位棉花种子性状的基因对揭示棉花种子性状的遗传规律,以及明确棉花种子、产量、纤维品质等性状间的遗传关系具有重要意义。以(渝棉1号×T586) F_2:7重组近交系群体构建的遗传连锁图谱,在鉴定270个家系3个环境种子物理性状的基础上,利用MQM作图方法,共检测到34个种子物理性状QTL,包括9个种子重(qSW)、5个短绒重(qFW)、3个短绒率(qFP)、8个种仁重(qKW)、6个种子壳重(qHW)和3个种仁率(qKP)QTL,它们可解释4.6%~80.1%的性状表型变异。9个QTL在2个或3个环境中被检测到,其中包括第12染色体显性光子位点的短绒重与短绒率QTL,以及另外7个微效应QTL。34个QTL分布于15条染色体,其中A染色体组20个,D染色体组14个。有12个染色体区段分布有2个或2个以上的QTL,而且同一染色体区域同一亲本所具有的不同性状QTL的方向大多数与性状表型相关系数的正负一致。     

九份紫色蓝色小麦的麦谷蛋白、醇溶蛋白和农艺性状分析

为了解紫色蓝色籽粒小麦的遗传背景及利用价值,采用聚丙烯酰胺凝胶电泳(PAGE)技术,对9份紫色蓝色小麦品种(系)的麦谷蛋白和醇溶蛋白进行了分析。麦谷蛋白的SDS-PAGE电泳结果显示,9份材料的HMW-GS出现了8种亚基和6种亚基组合类型;Glu-A1位点的主要亚基为1亚基(66.7%),Glu-B1位点主要为7+8亚基(55.6%),优质14+15亚基频率为22.2%,Glu-D1位点,优质亚基5+10的频率为55.6%。主要亚基组合为1/7+8/5+10和Null/7+8/5+10。9份材料的LMW-GS共分离出17条带,其中有7条为共有条带,比例达到41.2%。醇溶蛋白的A-PAGE电泳结果显示,9份材料共分离出20条带,其中共有条带7条(35.0%);9份材料的LMW-GS和醇溶蛋白遗传多样性较低。聚类分析结果显示,9份材料的遗传距离为0.07~0.37,在遗传距离为0.22水平时,9份材料可分为4类,其中HR-1和NH-1,在0.07的水平上聚为一类。综合农艺性状特征、麦谷蛋白和醇溶蛋白分析,紫色籽粒材料漯珍1号、HR-1和NH-1,具有1和5+10优质亚基,可作为优良亲本在遗传和育种中加以研究利用。     

大豆籽粒大小与形状性状的QTL定位

大豆籽粒大小和粒形性状不仅与产量和外观品量紧密相关,还对机械化播种有着一定的影响。本研究采用大粒栽培品种冀豆12与小粒半野生地方品种黑豆(ZDD03651)杂交衍生的包含188个重组自交系的F_6:8和F_6:9群体为材料,对粒长、粒宽、粒厚、长宽比、长厚比和宽厚比的遗传结构进行分析,并分别以WinQTLCart 2.5、QTLNetwork 2.1和IciMapping 4.1 3种模型对以上性状的加性效应QTL,QE互作效应及上位性互作效应进行检测。6个性状的广义遗传率介于64.01%~79.57%,遗传力较高,且除粒厚外的其他性状受环境影响显著。共定位到加性效应QTL38个,单个QTL的贡献率介于2.21%~10.71%之间,分布在12条染色体的17个标记区间内,且12个染色体区段至少与两种性状相关。两种及以上模型同时检测到的QTL有24个,3种模型均能检测到的QTL共8个,分别为qSL-17-1、qSL-18-1、qSW-6-1、qST-2-1、qST-6-1、qSLT-2-2、qSWT-2-1和qSWT-20-1。检测到7对上位性互作QTL,分别涉及粒长、粒宽、长宽比、长厚比和宽厚比,互作效应贡献率介于0.78%~6.20%之间。QE互作效应贡献率均较低,介于0.0005%~0.3900%之间。以多种模型同时检测结果准确性较高,可为分子标记辅助育种工作提供可靠理论基础。     

种植密度对贵烟5号农艺性状及经济性状的影响

为寻求贵烟5号适宜的种植密度,试验研究不同种植密度对贵烟5号农艺性状及经济性状的影响。研究结果表明：从农艺性状来看,种植密度对贵5号生育期、团棵期农艺性状影响不大;差异主要表现在现蕾期,最大叶长、最大叶宽随种植密度的增大而减小,以900株／667m2最高,达到68．6cm、37．4cm,1000株／667m2次之,达到64．8cm、34．6cm;移栽40d内,种植密度对根、茎、叶干重影响不大,移栽40d后,根、茎、叶干重表现出与现蕾期最大叶长相同的变化规律。从经济性状来看,产量随种植密度的增大而增加,以1200株／667m2（168．4kg／667m2）最高;产值、均价、上等烟率呈1000株／667m2＞900株／667m2＞1100株／667m2＞1200株／667m2的趋势,产值、均价、上等烟率以1000株／667m2最高,分别达到3933．2元／667m2、24．4元／kg、39．2％,较其它处理高0．2元／kg～4．2元／kg、112．0元／667m2～531．6元／667m2、0．4～13个百分点,推荐900株／667m2～1000株／667m2为贵烟5号适宜的种植密度。     

Development of an interspecific Vigna linkage map between Vigna umbellata (Thunb.) Ohwi & Ohashi and V. nakashimae (Ohwi) Ohwi & Ohashi and its use in analysis of bruchid resistance and comparative genomics

To facilitate transfer of bruchid resistance to azuki bean (Vigna angularis) from its relatives an interspecific mapping population was made between rice bean, V. umbellata, and the related wild species V. nakashimae. The V. umbellata parent is completely resistant and V. nakashimae is completely susceptible to the bruchid beetle pests, azuki bean weevil (Callosobruchus chinensis) and cowpea weevil (C. maculatus). There is very low cross compatibility between V. umbellata and azuki bean. Therefore, V. nakashimae, that crosses with both V. umbellata and V. angularis without the need for embryo rescue, is used as a bridging species. A genetic linkage map was constructed based on an interspecific F₂ mapping population between V. umbellata and V. nakashimae consisting of 74 plants. A total of 175 DNA marker loci (74 RFLPs and 101 SSRs) were mapped on to 11 linkage groups spanning a total length of 652 cM. Segregation distortion was observed but only three markers were not linked to any linkage group due to severe segregation distortion. This interspecific genome map was compared with the genome map of azuki bean. Of 121 common markers on the two maps, 114 (94.2%) were located on the same linkage groups in both maps. The marker order was highly conserved between the two genome maps. Fifty F₂ plants that produced sufficient seeds were used for quantitative trait locus (QTL) analysis and locating gene(s) for C. chinensis and C. maculatus resistance in V. umbellata. The resistance reaction of these F₂ plants differed between C. chinensis and C. maculatus. Both resistances were quantitatively inherited with no F₂ plants completely susceptible to C. chinensis or C. maculatus. One putative QTL for resistance to each of these bruchid species was located on different linkage groups. Other putative QTLs associated with resistance to both C. chinensis and C. maculatus were localized on the same linkage group 1. Linked markers associated with the bruchid‐resistant QTL will facilitate their transfer to azuki bean breeding lines.     

Prediction of heterosis using QTLs for yield traits in rapeseed (Brassica napus L.)

Three double low (erucic acid and glucosinolates) self-incompatible lines and 22 varieties from different origins were selected to produce 66 hybrids according to a NC II mating design. Field experiments for identification of hybrid performance and heterosis were conducted in two successive rapeseed growing seasons in Wuhan, China. After heterosis identifications, SI-1300 and Eagle were chosen to construct an F₂ segregating population. One hundred and eighty four F_2:3 lines were planted at Wuhan and Jingmen to test yield traits. F₂ plants and the 25 parents were analyzed using simultaneously AFLP (amplified fragment length polymorphism) and SSR (simple sequence repeat) markers. A total of 270 and 718 polymorphic loci were detected in the F₂ population and among the 25 parental lines, respectively. Of the 718 polymorphic loci, 178 were significantly correlated to yield traits. With the use of one-way ANOVA, 84 common QTLs were detected for 12 traits at two trial locations. Although the genetic distances based on general/specific heterozygosities and single-locus QTLs showed significant correlations with hybrid performance and heterosis for some yield traits, the determination coefficients were low. The results suggested that neither heterozygosities nor QTLs for yield traits were suitable to predict hybrid performance and heterosis in Brassica napus.     

利用相同来源F2:3和BC2S1群体定位玉米生育期QTL

以普通玉米自交系丹232和爆裂玉米自交系N04为亲本构建259个F2:3和220个BC2S1家系群体,利用SSR标记构建分子标记遗传图谱,利用复合区间作图方法对4个生育期性状进行QTL定位和效应分析。利用F2:3群体共检测到4个抽雄期QTL、6个吐丝期QTL和3个散粉期QTL。单个QTL可解释的表型变异为6.7%~18.4%,可解释的表型总变异为28.9%~50.3%,11个QTL的增效基因来自生育期较长的亲本丹232,其余2个QTL的增效基因来自生育期较短的亲本N04;BC2S1群体检测到8个与4个生育期性状相关的QTL,单个QTL可解释的表型变异为4.5%~11.6%,可解释的表型总变异为13.2%~18.5%,增效基因来自两个亲本的QTL为3个和5个。两类群体检测出QTL的数目、位置、效应和贡献率均存在较大差异,主要原因在于BC2S1群体抽样选择所引起的群体结构差异,F2:3群体显示出较高的QTL检测能力,但回交育种过程中应慎重依据F2:3群体QTL定位结果进行标记辅助选择(MAS)。     

T1 locus in cotton is the candidate gene affecting lint percentage, fiber quality and spiny bollworm (Earias spp.) resistance

A genetic linkage map of chromosome 6 was constructed by using 270 recombinant inbred lines originated from an upland cotton cross (Yumian 1 × T586) F₂ population. The genetic map included one morphological (T₁) and 18 SSR loci, covering 96.2 cM with an average distance of 5.34 cM between two markers. Based on composite interval mapping (CIM), QTL(s) affecting lint percentage, fiber length, fiber length uniformity, fiber strength and spiny bollworm resistance (Earias spp.) were identified in the t₁ locus region on chromosome 6. The allele(s) originating from T586 of QTLs controlling lint percentage increased the trait phenotypic value while the alleles originating from Yumian 1 of QTLs affecting fiber length, fiber length uniformity, fiber strength and spiny bollworm resistance increased the trait phenotypic value.     

Improvement of Appearance Traits of elite Rice Zhenshan 97B by Molecular Introgression of Targeted about 800 kb Interval from Indica Rice Jiafuzhan Genome

Rice appearance trait is mainly mean grain length (GL), grain width (GW), ratio of length and width (L/W), chalkiness (CH) and transparence (TR). Appearance is the first impression, and rice appearance traits effect significantly the value of commodity. Hybrid rice is relatively low quality, especially on rice appearance quality,which restricts partially its extend and badly export of hybrid seed and rice in China.Shanyou 63, the most famous hybrid rice combination of China, could not be also sustainable application because of its poor qualities. In this studies, We attempt to improve appearance quality of the elite rice maintainer of Zhenshan 97B by using molecular approach of genomic interval targeted introgression. Three F2 populations were constructed to study the classical and molecular genetic of rice appearance traits, at the same time, molecular marker-asisted toimprove the main maintainer line, Zhenshan 97B were performed. There some following results:Three F2 populations were constructed based on crosses of Guangluai 4×Jiafuzhan (GJ popu.), Minghui 86×Jiafuzhan (MJ popu.) and Zhenshan 97B×Jiafuzhan (ZJ popu.). ZJ popu and GJ popu were produced to reconstruct the linkage maps related with rice appearance traits based on BSA, and detect QTL of target traits based on IM.In ZJ popu, 9 QTLs of target traits were detected. The interval, RM169～RM516 on Chromosome 5, was genetic locus of GW, L/W, CH and BW, and the explained variances were 10.9%, 14.9%, 12.0% and 14.2%, respectively.RM214 on chromosome 7, RM339 on chromosome 8 were genetic loci if CH and BW, and the explained variances were 9.4%, 10.0%, 11.0% and 12.1%. besides there is a genetic locus, RM347, of G/W on chromosome 3, and the explained varance was 10.3%. In GJ popu, 5 QTLs of rice appearance traits were detected. The interval, RM169-RM516 on Chromosome 5, were also the genetic loci of GW, CH and BW, and the explained variances were 9.0%, 12.5%, and 13.6%, respectively. RM264～RM80 on chromosome 8 was the genetic loci of GW amd L/W,and the explained variances were 14.7% and 13.4%. The genotypes of all QTLs, except RM214, from Jiafuzhan contributed to improving riee appearance traits.The research was to improve the rice appearance quality of Zhenshan 97B by introgressing QTLs of rice appearance traits from Jiafuzhan, a donor parent, by means of MAS in the process of recurrent backcrossing, 4 SSR markers were used to detect the target genotypes from donor parent, and 70 SSR primers to identify the genetic background of recurrent parent. Consequently, there were 19 target individuals in BC3, in which the mean value of GL, GW, L/W, CH and BW were 6.06±0.04mm, 2.50±0.02mm, 2.43±0.02, 29.5±2.7 and 29.4±2.7%, respectively,and the mean homologous degree (HD) to recurrent parent is up to 98.22%. Compared to Zhenshan 97B, GL, CH and BW decreased 0.17 mm, 34.9% and 34.5% respectively and however L/W increased 0.19. which accounted separately for 25.37%, 54.79%, 54.57% and 10.50% of thedifference of every trait between two parents. It is very luckly to find a individual, 13BC2-3BC3 line, whose GL, GW, G/W, CH and BW were 6.04 mm, 2.43 mm, 2.49,2.5% and 2.5% separately, There is very important signification for it to be used in hybrid rice breeding improving appearance traits. In the research, MAS efficiency of 3 loci (with 4 markers ) was 5.68% and coincident degree was 73.08%.     

利用已测序水稻品种分析其农艺性状基因座

水稻重要农艺性状的基因定位研究在育种上具有重要意义。2004年在海南陵水县种植两个完全测序水稻品种日本晴与9311的F₂群体及双亲，分别考察了其单株分蘖数、穗数、有效分蘖数、穗长、主穗长、抽穗期、株高和剑叶8个农艺性状3次重复的平均值。用已构建的连锁遗传图谱（Nipponbare/9311-F₂遗传图谱）及Excel 2000和Mapmaker/QTL 1.1b软件对这8个性状间的相互关系和基因位点进行了分析。结果在LOD>2.0和P＜0.005的条件下共检测到41个QTLs，它们分布在水稻所有染色体上，单个QTL对性状表型贡献率11.0%～46.4%，其中大于20%的有22个。对选用已测序材料为亲本构建图谱来探讨水稻农艺性状的分子基础及其育种意义进行了讨论。