应用水量平衡法确定波涌灌溉下土壤入渗参数

基于田间实测的地表水流推进过程 ,利用水量平衡法推求波涌灌溉间歇供水条件下的土壤入渗参数。在此基础上 ,利用地面灌溉模型模拟田间水流推进过程并与实测值作对比后发现 ,与单点入渗测试方法相比较 ,该法不仅具有较高的参数估值精度 ,还具备田间试验工作量相对较小、应用简便等特点 ,具有较好的实用价值。     

新疆阿图什哈拉峻地区地下水系统分析

通过对阿图什哈拉峻地区水文地质特征和地下含水系统各子系统间关系分析,采用系统分解合成方法,将地下水系统分解为北部单一潜水系统和南部上层潜水、下部承压水子系统,在合理耦合各子系统基础上,建立了该地区地下水系统的数学模型。采用有限元方法对该模型进行数值离散,经DevelopStudio编程,利用潜水、承压水模拟与实测结果的比较,在得到该地区地下水系统的水文地质参数的同时,重点研究了各系统间水量交换关系,为地下水系统的合理开采利用提供了理论基础和科学数据。     

甘蓝型油菜三个品质性状的双列杂交分析

用五个甘蓝型油菜亲本材料的双列杂交设计,对含油量、硫甙总量按Hayman分析公式进行了全双列杂交分析,对蛋白质含量按Singh(1981)公式进行了半双列杂交分析。结果表明,三个品质性状都符合加性-显性模型。含油量和硫甙总量均呈部分显性,狭义遗传力分别为59.6%和87.4%,蛋白质含量呈超显性遗传((H./D)～(1/2)=1.58),狭义遗传力为42.4%。     

南方稻区迟熟中籼品种主要经济性状遗传参数估计

应用方差和协方差分析方法对1989年南方区试中籼迟熟组的8个品种的13个性状进行了遗传参数估计,结果表明,参试品种的着粒密度、有效穗和千粒重的遗传基础较丰富,抽穗日数和小区产量的遗传差异则较小;千粒重、着粒密度、穗长和抽穗日数的广义遗传率较高,日产量和小区产量则较低,结实率的遗传变异系数和广义遗传率最低;产量与着粒数的相关较微弱,与有效穗,着粒密度等性状的遗传相关显著,与每穗实粒数、结实率和千粒重的环境相关值较大,有效穗、着粒数和千粒重三个产量构成因素两两之间的三种相关值均为负值,其遗传相关达显著或极显著标准;同一遗传型在不同环境条件中,穗粒数和有效穗与产量的关系较大。     

植保无人飞机喷施叶面肥作业参数对枇杷冠层雾滴沉积分布的影响

为探究植保无人飞机（大疆T30）作业参数对枇杷冠层雾滴沉积分布的影响。本文利用3个因素（作业高度、作业速度、亩用液量）,3因子的正交实验,进行植保无人飞机喷洒枇杷树的喷雾试验。试验结果表明：从雾滴沉积密度、雾滴覆盖率和雾滴穿透性等因素来看,植保无人飞机对枇杷树的最佳作业参数为：作业高度2.0m、作业速度4.5m·s-1、亩用液量2.0L。对雾滴穿透冠层的影响最大的因素是工作高度;在1.5m的作业高度下雾滴沉积穿透性最佳。本研究对指导植保无人飞机枇杷树精准喷施叶面肥具有重要意义。     

基于ICESat-GLAS数据和回波仿真原理识别森林类型

[目的]利用星载激光雷达波形数据对森林类型识别时,受地形、噪声和林层结构等因素影响,针叶林、阔叶林和混交林森林类型识别精度较低,为提高森林类型识别精度,需提取与森林类型相关的波形特征参数.[方法]结合回波仿真原理与林分冠层特征对GLAS回波波形进行理论分析,提出了与森林类型相关的波形特征参数147R-cafit-、K1...     

Physiological and anatomical changes in two rapeseed (Brassica napus L.) genotypes under drought stress conditions

Understanding the mechanisms of drought resistance in crop species is crucial for the selection and breeding of tolerant rapeseed (Brassica napus L.) varieties. The present study aimed to assess the physiological and anatomical responses of two rapeseed genotypes, P287 (drought-tolerant) and T88 (drought-sensitive) under three intensities of drought stress. All physiological and anatomical parameters related to drought acclimation were significantly altered in both genotypes under stress conditions. At the fourth-leaf stage, the relative water content, chlorophyll content, protein content, malondialdehyde content, and the activities of peroxidase and catalase in P287 were significantly higher than those in T88, particularly under severe drought conditions. After rehydration, all physiological indexes recovered rapidly, especially in P287. In addition, under drought stress, compared with T88, P287 had thicker palisade tissue, thinner spongy tissue, higher ratio of chloroplast length to chloroplast width, higher stomatal density and stomatal closure rate. Overall, the interaction between physiological and anatomical features improved the drought tolerance of P287 under drought stress conditions.     

Effects of sediment load on the abrasion of soil aggregate and hydraulic parameters in experimental overland flow

The breakdown of soil aggregates under rainfall and their abrasion in overland flow are important processes in water erosion due to the production of more fine and transportable particles and, the subsequent significant effect on the erosion intensity. Currently, little is known about the effects of sediment load on the soil aggregate abrasion and the relationship of this abrasion with some related hydraulic parameters. Here, the potential effects of sediment load on soil aggregate abrasion and hydraulic parameters in overland flow were investigated through a series of experiments in a 3.8-m-long hydraulic flume at the slope gradients of 8.7 and 26.8%, unit flow discharges from 2×10~(–3) to 6×10~(–3) m~2 s~(-1), and the sediment concentration from 0 to 110 kg m~(–3). All the aggregates from Ultisols developed Quaternary red clay, Central China. The results indicated that discharge had the most significant(P0.01) effect on the aggregates abrasion with the contributions of 58.76 and 60.34%, followed by sediment feed rate, with contributions of 39.66 and 34.12% at the slope gradients of 8.7 and 26.8%, respectively. The abrasion degree of aggregates was found to increase as a power function of the sediment concentration. Meanwhile, the flow depth, friction factor, and shear stress increased as a power function along with the increase of sediment concentration at different slope gradients and discharges. Reynolds number was obviously affected by sediment concentration and it decreased as sediment concentration increased. The ratio of the residual weight to the initial weight of soil aggregates(Wr/Wi) was found to increase as the linear function with an increasing flow depth(P=0.008) or Reynolds number(P=0.002) in the sediment-laden flow. The Wr/Wi values followed a power function decrease with increasing friction factor or shear stress in the sediment-laden flow, indicating that friction factor is the best hydraulic parameter for prediction of soil aggregate abrasion under different sediment load conditions. The information regarding the soil aggregate abrasion under various sediment load conditions can facilitate soil process-based erosion modeling.     

一种橡胶小蠹虫自制粘捕装置的研制及其田间诱捕参数筛选

橡胶小蠹虫为害重,防治困难。为了探索更加高效的田间防治方法,本研究通过将“牛皮纸+粘虫胶+诱集剂”组配,研究集成了一种橡胶小蠹虫粘捕装置,对其诱捕参数（粘捕装置材质、诱集剂药袋悬挂数量、药液暴露面积以及粘捕装置的间距、悬挂高度）进行了筛选,并与常规诱捕器在重量、成本和诱捕效果方面进行比较。结果表明,在月桂烯、2-甲基-3-丁烯-2-醇、S-(-)-柠檬烯、莰烯、顺式-马鞭草烯醇5种诱集剂的诱集下,自制粘捕带对橡胶小蠹虫的粘捕总数分别为：554、445、341、381、367头;普通粘虫带对橡胶小蠹虫的粘捕总数分别为：260、230、179、202、199头。其中月桂烯、2-甲基-3-丁烯-2-醇、S-(-)-柠檬烯,自制粘捕带的粘捕数量均显著高于普通粘虫带,表现出较好的粘捕效果。采用挂袋法的最佳药袋数为2袋,诱集剂的最佳药液暴露面积为6.6 mm²,粘捕装置的最佳相互间距为50 m,最佳悬挂高度建议在2.5 m。自制粘捕装置在重量、成本以及诱集数量上均优于常规诱捕器,对橡胶小蠹虫防控具有高效成本低、环保可降解、简单易操作等特点。     

Artificial Diet Influences Population Growth of the Root Maggot Bradysia impatiens (Diptera: Sciaridae)

In order to investigate the effects of artificial diets on the population growth of root maggot Bradysia impatiens, its population growth parameters were assayed on eight artificial diets (Diet 1, D2, D3, D4, D5, D6, D7, and D8). Results showed that developmental duration from egg to pupa was successfully completed on all eight artificial diets. However, the egg to pupal duration was shortest, while the survival rate of four insect stages was lowest when B. impatiens was reared on D1. When B. impatiens was reared on D7 and D8, the survival rate, female longevity, and female oviposition were higher than those reared on other diets. When B. impatiens was reared on D7, the intrinsic rate of increase (r_m = 0.19/d), net reproductive rate (R₀ = 39.88 offspring per individual), and finite rate of increase (λ = 1.21/d) were higher for its population growth with shorter generation time (T = 19.49 d) and doubling time (Dt = 3.67 d). The findings indicate that the D7 artificial diet is more appropriate for the biological parameters of B. impatiens and can be used an indoor breeding food for population expansion as well as further research. We propose that vitamin C supplement added to the D7 is critical for the improvement of the B. impatiens growth.