棕榈粕替代部分玉米对藏羊母羊小肠形态发育、消化酶活性及抗氧化功能的影响

试验旨在探究精料补充料中使用不同比例棕榈粕替代玉米对藏羊母羊肠道组织形态学、消化酶活性、pH、脂多糖以及抗氧化能力的影响。选取初始体重相近且健康的2～3月龄高原型藏羊母羊120只,随机分为4组,每组30只,每组6个重复,每个重复5只母羊,分别饲喂0%、15%、18%和21%水平的棕榈粕替代精料中玉米。试验期97d。结果显示：1)0%组与15%组间小肠各段的绒毛高度、绒毛宽度、隐窝深度、黏膜厚度以及绒毛高度/隐窝深度差异均不显著（P>0.05）;2)0%组空肠的α-淀粉酶、纤维素酶、脂肪酶及糜蛋白酶显著或极显著小于15%组（P<0.05或P<0.01）;3)0%组空肠的谷胱甘肽过氧化物酶、过氧化氢酶活性显著低于15%组与18%组（P<0.05）,相较于21%组差异不显著（P>0.05）;4)18%组与21%组空肠的脂多糖含量显著或极显著高于0%组（P<0.05或P<0.01）,与15%组相比差异不显著（P>0.05）。由此可见,棕榈粕可替代部分玉米饲喂藏羊母羊,推荐替代玉米的比例为15%。     

小麦饲料中添加木聚糖酶对高原型藏羊胃肠道发育的影响

旨在分析小麦粉中添加木聚糖酶(xylanase, Xyl)对藏羊羔羊胃肠道发育的影响。选择同质性良好的2～3月龄高原型藏羊公羔60只,随机分为两组,每组30只,各组内设置5个重复。对照组(Control group)饲喂不含木聚糖酶的日粮,试验组(Test group)饲喂含0.2%木聚糖酶的日粮,试验分为预饲期10 d和正试期90 d。饲养试验结束时,两组各随机选取5只羔羊进行屠宰,采集消化道组织置于多聚甲醛固定,并收集血液、瘤胃和空肠内容物。结果显示：1)与对照组相比,试验组瘤胃的角质层厚度、颗粒层厚度,瓣胃的乳头长度、乳头宽度、角质层厚度、颗粒层厚度,皱胃的黏膜厚度以及十二指肠的肌层厚度,空肠的绒毛高度、黏膜厚度,回肠的肌层厚度显著提高(P<0.05);2)对照组瘤胃和血清的LPS含量显著高于试验组(P<0.05);3)相较于对照组,试验组瘤胃的糜蛋白酶、胰蛋白酶、脂肪酶活性以及空肠的糜蛋白酶、α-淀粉酶活性显著提高(P<0.05);4)试验组瘤胃的总抗氧化能力水平、谷胱甘肽过氧化物酶及过氧化氢酶活性以及空肠的总抗氧化能力水平、谷胱甘肽过氧化物酶、超氧化物歧化酶...     

Unicity Theorem of Meromorphic Functions

ln this paper,we firstly in vestigated the un icity properties of meromorphic functions with three common values,extended the results of H. Ueda,Yi Hongxun.Moreover,wealso improved the results of K,Shibazaki,Yi Hongxun and C,C,Yang,Hua xinhou and some others     

Weighting Coefficient Optimization Unification of Lexicographic Method in Fuzzy Multi -objective Optimization Design

The Lexicographic method has subjective and empirical character,so a weighting coefficient is introduced by considering the importance and proportion of each individual object,the preferable result of every individual object can be confirmed by comparing the degree of similarity between the perfect one and the ecumenic one and the Fuzzy optimization will be perfect.The effectiveness of these methods is illustrated by a fuzzy optimal design of the three-bar truss.     

Determining crop-water production functions using yield–irrigation gradient algorithms

Crop-water production functions (CWPFs) are a useful tool for irrigation planning, but derivation of CWPFs by field experimentation is expensive, and traditional analytical techniques are not well suited to derivation of CWPFs. Physiologically based crop models provide a useful tool for simulation of agricultural experiments, but they have not been extensively applied to the task of CWPF determination. A new algorithm type based upon differential crop yield response to irrigation (“yield–irrigation gradients” [YIG]) is presented that uses these crop models to determine planning-level irrigation schedules and CWPFs. Three specific algorithms are developed within this type, varying in complexity, performance, and computational costs. Performance of the YIG methods is compared against a standard reference evapotranspiration method. In particular, the randomized iterative YIG (RIYIG) algorithm provides near-optimal results but at the highest computational costs of all the methods specified. All of the techniques presented have general applicability and are not limited to any one crop or location.     

牛乳溶菌酶概述及应用

溶菌酶又称胞壁质酶,广泛存在于自然界的动物、植物及微生物中。具有抗菌消炎、抗病毒、增强免疫力以及促进组织修复等生物学特性。并且应用于食品、饲料、医学及生物工程之中。针对目前临床中,对于奶牛乳房炎广泛大量使用抗生素,并且存在耐药性、药物残留等现象。重组溶菌酶质粒可以作为基因工程药物替代抗生素对乳房炎的防治,并且安全、无残留、无副作用。同时也还有待于进一步的研发和推广。     

Evaluation of unconstrained and constrained mathematical functions to model girth growth of rubber trees (Hevea brasiliensis) using young age measurements

No attempt has been made to date to model growth in girth of rubber tree (Hevea brasiliansis). We evaluated the few widely used growth functions to identify the most parsimonious and biologically reasonable model for describing the girth growth of young rubber trees based on an incomplete set of young age measurements. Monthly data for girth of immature trees (age 2 to 12 years) from two locations were subjected to modelling. Reparameterized, unconstrained and constrained growth functions of Richards (RM), Gompertz (GM) and the monomolecular model (MM) were fitted to data. Duration of growth was the constraint introduced. In the first stage, we attempted a population average (PA) model to capture the trend in growth. The best PA model wasfitted as a subject specific (SS) model. We used appropriate error variance-covariance structure to account for correlation due to repeated measurements over time. Unconstrained functions underestimated the asymptotic maximum that did not reflect the carrying capacity of the locations. Underestimations were attributed to the partial set of measurements made during the early growth phase of the trees. MM proved superior to RM and GM. In the random coefficient models, both Gf and G0 appeared to be influenced by tree level effects. Inclusion of diagonal definite positive matrix removed the correlation between random effects.The results were similar at both locations. In the overall assessment MM appeared as the candidate model for studying the girth-age relationships in Hevea trees. Based on the fitted model we conclude that, in Hevea trees, growth rate is maintained at maximum value at t0, then decreases until the final state at dG/dt ≥ 0, resulting in yield curve with no period of accelerating growth. One physiological explanation is that photosynthetic activity in Hevea trees decreases as girth increases and constructive metabolism is larger than destructive metabolism.     

Fuel consumption as indicator of the economics in mechanization

After a brief discussion of production functions as models for input/output relations in forest work operations, studies of the cost of machine use are reviewed. It is suggested that the fuel consumption of a forest machine can be used as a parameter for assessing the true, total cost of using a machine, exclusively the wage of the operator. Fuel then is not only an input but also represents all other cost items such as capital (depreciation, interest), repairs and maintenance. This has the advantage that all machines in a system can be aggregated and their costs assessed by an easily quantified parameter. Capital (in the form of machines) in production functions, through which the optimum mix of labour and machines for minimizing the cost per unit of production is determined, can be substituted by fuel. It is also suggested that fuel consumption can be used in management as an aggregate indicator in planning, control, remuneration of work and forecasting.