Suitability of Bi-linear Restoring Force Model in Earthquake Response Analysis

Based on the data of dynamic tests of small single-storey steel frames,the suitability of simplified hi-linear restoring force model in earthquake response analysis is discussed, and the Maximum displacement response MD, the sum of squares of the displacements in the whole vibrating history SSD, and the total dissipated energy EI are considered respectively as equivalent object.     

On Determinative Parameters of SDOF Systems in Elasto- plastic Earthquake Response

Parameters dominating elasto- plastic earthquake response of SDOF systems,relation between ground motion amplitude and elasto- plastic response of SDOF systems are presented in this paper.     

Application of Engineering WorkStation in Analysis of Truck Crashworthiness

This paper presents the basic equations and algorithm of vehicle crashworthinessbriefly.Take a light-truck for example,some applied problems in ustng Engineering WorkStationto analysis truck crashworthiness are discussed.A installation method of contact surface is intro-duced,Finally,a nurnerical simulation result is presented.     

Seismic Behavior of Asymmetric Building under Pushover Analysis

Pushover analysis is a tool to study the inelastic behavior of structures under strong seismic action. The 3D-pushover analysis was performed to analyze the inelastic lateral-torsional coupled response of multistory asymmetric structures. The symmetric frame and frame-wall systems were studied in this paper, and the capability curve of the top displacement and base shear,the story drift and the position of rotation center were compared with reference to corresponding symmetric structures. The characters of inelastic response of multistory asymmetric structures were found. The conclusion provides reference for performance-based seismic design of asymmetric structures.     

小麦花培材料的筛选和利用

花培育种是一条快速有效的育种途径，采用两种培养基对20个小麦组合材料进行花培分析，结果表明：小麦花培愈伤组织诱导培养基K优于C17，绿苗产率是C17的3.5倍多。不同基因型材料花药培养差异较大，筛选出一批不同类型的高培养力基因型材料，为有目的组配杂交组合提供依据，提高花培育种效率。     

切线泵流动特征的整流场数值模拟

对单级切线泵在设计工况进行了定常流动数值模拟，分析了叶轮流道及蜗壳内的液体流动情况。结果表明，切线泵内流场非常复杂，叶轮进口有明显冲击，叶轮各流道的速度、压力差异很大，环形蜗壳内流动呈现旋涡推进特征，上、下游流动有强烈的相互作用，整机流场不具有对称性；环形蜗壳的几何结构以及流场上、下游的相互作用是导致整机流场非对称特性的主要原因。计算结果为进一步改进结构、提高性能、减小水力损失提供了理论依据。     

车用493型柴油机冷却问题初探——机体冷却水流动CFD模拟

车用493型柴油机在我国主要是轻卡的配套动力,量大面广。为了在提高升功率的同时满足国家排放要求,很多研究工作主要着重于强化结构件、改进气道及工作过程、提高供给系统的喷油压力等,在冷却方面着力不够。实际上冷却不均衡,热应力集中同样会造成机体变形,导致颗粒物排放上升。冷却效果的好坏又在很大程度上取决于冷却水套内冷却介质流动以及分布的情况。本文从冷却分析入手,利用CFD商用流体软件STAR-CD对车用493型柴油机的冷却系统中的机体内冷却水的流动进行了三维数值模拟,给出冷却水套内冷却介质的流动场,分析它对换热的影响。     

分叉管流动的数值模拟

采用非结构、非均匀的网格和有限元方法,通过求解Navier-Stokes方程,对90°分叉管的流动进行了并行数值模拟的研究。计算网格为500000个有限单元,计算Reynolds数为1500。计算结果给出了90°分叉管详细的流动结构。     

直齿圆柱齿轮冷精锻成形过程数值模拟分析

对直齿圆柱齿轮冷精锻成形过程进行了三维大变形弹塑性有限元数值模拟。对闭式模锻预锻及以闭式模锻、孔分流及约束分流为终锻的两步成形过程的流动情况进行了数值分析。数值模拟结果及前期的工艺试验表明：终锻中采取分流、尤其是约束孔分流措施对于降低工作载荷、提高角隅充填能力十分有利，采用矩阵变换技术解决因引入边界摩擦及滑动约束带来的刚度阵非对称问题较为简单、合理、有效。     

摆动活齿传动系统扭转振动分析

建立了摆动活齿传动系统的扭转振动动力学模型，导出了该扭振系统的振动方程。系统动力学模型考虑了活齿传动双排结构中激波器、活齿、活齿架的转动惯量、时变啮合刚度、误差、阻尼等，因此，所建立的微分方程式是多自由度时变方程组，对此，采用四阶Runge-Kutta法对系统动态响应进行了求解。