温度对住宅区气体污染物扩散的影响

温度在气体污染物扩散的过程中起一定的作用。在现实生活中,由于日晒和地表辐射的存在,使得地面、建筑物外表面都与空气存在一定的温差。温差的存在会改变地表及壁面附近的流场,从而对住宅区污染物的扩散产生影响。利用理论推导对热力因素及扩散因素的关系进行了研究,并且与数值模拟的试验结果进行比较。结果发现理论推导与试验结果整体趋势相一致。这表明在与无温差情况相比较,温差存在时,地表及壁面附近流场更加紊乱;温差与气体污染物的扩散具有正相关性,对住宅区污染物的稀释起积极作用。     

森林对降水的影响概述

森林能否增加降水,这是植树造林、美化环境等工作中必然要考虑的问题。文章总结了国内外相关文献,就森林对降水的影响做了阐述。综合现有研究结果来看,森林对降水有无影响目前还没有普遍性的结论;对于局地森林对降水的影响应持保守态度,既不能说"有",也不能说"无"。明确的结论必须结合当地地形、天气、气候条件做具体的研究分析后才能得出,这样的结论才更科学,更具指导意义。因此关于宁夏植树造林是否对宁夏的区域气候产生影响,以及有什么样的影响,目前还不清楚。另外一个主要问题就是森林的尺度,即多大面积的森林才会对区域降水产生影响,因为如果森林的面积很有限,对区域降水的影响是否也很有限等等,这些问题都需要进一步深入研究和探讨。     

Comparative pharmacokinetics and pharmacokinetic/pharmacodynamic analysis by nonlinear mixed‐effects modeling of cefquinome in nonpregnant,pregnant, and lactating goats after intravenous and intramuscular administration

Cefquinome is a fourth‐generation cephalosporin that is used empirically in goats. Different physiologic factors like pregnancy or lactation could determine the pharmacokinetic behavior of drugs in the organism. The objectives of this study are to (a) compare the pharmacokinetics of cefquinome after intravenous and intramuscular administration in adult nonpregnant (n = 6), pregnant (n = 6), and lactating goats (n = 6), at a dose of 2 mg/kg, with rich sampling by nonlinear mixed‐effects modeling, (b) conduct a pharmacokinetic/pharmacodynamic analysis to evaluate the efficacy of the recommended posology in goats with different physiological states, and (c) determine the optimal posology that achieve a PTA value ≥ 90%, taking into account a T > MIC ≥ 60% of a MIC value ≤ 0.25 µg/ml, in the different subpopulations of goats for both routes. Gestation significantly increased Ka and V1, while reduced F0, Cl, and Q. On the other hand, lactation significantly increased V1 and reduced Tk0. Cefquinome concentrations achieved in placental cotyledon, amniotic fluid, and fetal serum indicate a minimal penetration across the placental barrier. Moreover, milk penetration of cefquinome was minimal. The total body clearance of cefquinome for goats was 0.29 L kg^?1 hr^?1, that is apparently higher than the reported for cows (0.13 L kg^?1 hr^?1) and pigs (0.16 L kg^?1 hr^?1). So, the optimal dose regimen for cefquinome after intravenous and intramuscular administration required higher dose and frequency of administration compared with recommendations for cows or pigs. Therefore, 2 mg kg^?1 8 hr^?1 and 5 mg kg^?1 12 hr^?1 could be used for IV and IM routes, respectively, for the treatment of respiratory infections caused by P. multocida and M. haemolytica, but only 5 mg kg^?1 12 hr^?1 by both routes should be recommended for Escherichia coli infections.     

鸡白痢沙门氏菌鸡胚感染模型建立方法的筛选

为筛选出理想的鸡白痢沙门氏菌宿主感染模型的建立方法,本研究通过选择不同接种方式配合不同菌液浓度接种不同胚龄鸡胚建立感染模型,将90枚SPF鸡胚随机分成9组,每组10枚,分别为A、B、C、D、E、F、G、H、I组,A组为空白对照组,其余各组为模型组,模型组分别以气室接种、蛋壳接触接种的方式对不同胚龄（11和14胚龄）SPF鸡胚接种不同浓度（1×10³、3×10³、9×10³、3×10⁵、9×10⁵ CFU/mL）的鸡白痢沙门氏菌C79-3菌株。每天观察情况直至出雏,待雏鸡孵出后按组分笼饲养,每隔12 h观察1次,连续观察7 d,观察各组雏鸡的临床症状、死亡情况,观察期结束对死亡和存活雏鸡进行剖检、组织病理学检查及鸡白痢沙门氏菌的分离鉴定。结果显示,各模型组均有雏鸡出现明显的鸡白痢病症状并死亡,相较于其他模型组,以11胚龄蛋壳接触感染方式接种9×10⁵ CFU/mL的C79-3菌液的F组和14胚龄气室感染方式接种3×10³ CFU/mL C79-3菌液0.1 mL的H组,鸡胚出壳率较高,可分别达到80%和90%,出壳雏鸡呈现明显鸡白痢病特征,剖检可见肝脏出血、盲肠膨大、卵黄囊吸收不良;组织病理切片可观察到肝脏、盲肠、心脏各有不同程度的损伤,发病率分别100%和88.8%,并且鸡白痢沙门氏菌阳性检出率分别达70%和90%。本研究结果表明,以11胚龄蛋壳接触感染方式接种0.1 mL 9×10⁵ CFU/mL的C79-3菌液和14胚龄以气室感染方式接种0.1 mL 3×10³ CFU/mL的C79-3菌液的两种方法均可用于建立稳定的鸡白痢沙门氏菌宿主感染模型。     

A dynamic, optimal disease control model for foot-and-mouth disease: I. Model description

A dynamic optimization model was developed and used to evaluate alternative foot-and-mouth disease (FMD) control strategies. The model chose daily control strategies of depopulation and vaccination that minimized total regional cost for the entire epidemic duration, given disease dynamics and resource constraints. The disease dynamics and the impacts of control strategies on these dynamics were characterized in a set of difference equations; effects of movement restrictions on the disease dynamics were also considered. The model was applied to a three-county region in the Central Valley of California; the epidemic relationships were parameterized and validated using the information obtained from an FMD simulation model developed for the same region. The optimization model enables more efficient searches for desirable control strategies by considering all strategies simultaneously, providing the simulation model with optimization results to direct it in generating detailed predictions of potential FMD outbreaks.     

Challenges and opportunities of unmanned aerial vehicles as a new tool for crop pest control

The application of pesticides is not simply delivering chemicals to the target area. It also involves considering the negative aspects and developing strategies to deal with them during the application process, to ensure the maximization of pesticides use efficiency and the maintenance of the ecosystem. Unmanned aerial vehicle (UAV) sprayers demonstrate unique advantages compared to traditional ground sprayers, particularly in terms of maneuverability and labor intensity reduction, showed great potential for chemical application in pest control. It is undeniable that there exist challenges in the practice of UAV spraying, such as higher potential risks of pesticide drift or pathogen transmission, uncertainty canopy deposition for different crops, and unexpected leaf breakage induced by downwash flow. Maximizing the utilization of downwash flow while avoiding lateral air movement outside the intended target crop area is a major issue for chemical application with UAV sprayers, particularly in light of the increasingly apparent consensus on the need for enhanced environmental protection during the chemical application process. It must be considered that the operation strategy in different scenarios and for different crop targets is not the same, unique requirements should be given on nozzle atomization, flight parameters, adjuvants and aircraft types in specific working situations. In future, the implementation of spray drift prediction, technical procedures development, and other solutions aimed at reducing pesticide drift and improving deposition quality, is expected to promote the adoption of UAV sprayers by more farmers. © 2023 Society of Chemical Industry.     

网络驱动的协同设计三维几何模型共享技术

为解决网络驱动的协同设计三维几何模型共享技术的实现问题,提出一种基于特征流的混合式3D几何模型共享机制,提出了基于多粒度的产品几何模型数据结构描述方法和面向模型局部操作的"游历-查询"特征的历史记录来重构模型的特征建模方法。建立了网络驱动的、基于CORBA/JAVA中间插件的3D几何模型特征信息同步传输和共享平台,CORBA/JAVA平台支持多用户、分布数据管理、消息传输、网络通讯以及可扩展性,通过该平台实现了三维模型的实时传输和共享。     

梳脱式联合收割机脱粒与输送装置模糊控制系统

建立了梳脱式联合收割机脱粒与输送装置的动力学模型，应用Fuzzytoo1box设计了模糊控制器。当作物属性变化等因素而引起该装置的工作负荷发生较大变化时，模糊控制器能够对机组前进速度傲出相应的调整，使被控量迅速恢复到设定值附近，且能保持稳定，有利于发挥机器的最大的工作潜能，提高机器的可靠性，降低机器故障率。     

Case- carburization Numerical Modeling and Craft Optimization on Steel Parts of Various Shapes

According to the diffusion equation of carburizing process and its boundary conditionand initial condition, various shapes steel parts are modeled under various case carburize craft parameters, concentration distribution curves have been obtained. Various craft parameters are compared, and carburizing temperature has more influence on carbon concentration distribution. Various shapes steel parts' carbon concentration distribution curves have some difference. According to the carbon concentration distribution curve, craft parameters can be adjusted in order to obtain the best carburizing craft.     

Control Strategy and Simulation Study on NiMH Battery Quick Charging for Regenerative Braking of HEV

Based on the result of NiMH battery performance experiments, changing trend of maximal temperature and difference in temperature of HEV NiMH battery in different SOC and different charging current is analyzed. Considering the working situation of HEV NiMH battery and the theory of battery quick charging, a control strategy for NiMH battery quick charging is described which adapts to HEV regenerative braking system based on Mascc law. By Modeling and simulating the process of NiMH battery quick charging with this strategy, constant voltage charge method and constant current charge method, validates this control strategy.