对公路桥头跳车原因与防治浅见

分析了桥头跳车的危害及原因,论述了软土地基加固处理、桥头搭板刚柔过渡、台背填料的选择等综合治理桥头跳车的方法和经验。     

森林灾害监测方法研究──以西南地区火灾监测为例*

森林灾害监测方法研究──以西南地区火灾监测为例纪平，易浩若，白黎娜关键词人工神经元网络，ＮＯＡＡ数据，遥感，专家系统目前，世界上许多国家都已开展了森林灾害监测方面的研究。１９８７年大兴安岭森林大火之后，我国也充分认识到了森林防火的重要性，并积极开展了...     

Improving the evaluation of multiple-dowel-type connection strength

Our study focuses on predicting the ultimate short-term load carrying capacity of timber-to-timber connections with dowel-type fasteners. The wide range of possible configurations in practice makes the resolution of these values by tests unrealistic. Moreover, different current regulations do not consider some specific failure mechanisms. In many countries, the reduction of resistance involved by this phenomenon is taken into account by considering an effective number of dowels (n_ef) smaller than the actual number of dowels (n) in the connection. However, these different regulations disagree on the values of n_ef and on other points (spacing, partial coefficient of security, formulas). These discrepancies in design rules invite the fundamental research on this topic and, therefore, new methods are sought in order to estimate the load carrying capacities of the connections. In the light of these, our approach consists of predicting the load carrying capacity with the neural network numerical tool. The results obtained by this analysis tool are satisfactory, although the model remains complex. Subsequently, we focus on the simplification of this numerical model with classical regression techniques in order to implement it in a design code.     

简易装卸设备

本文介绍如何拆下集材拖拉机搭载板，安装架杆，利用绞盘机、钢索及架杆滑轮装卸货物。此装卸设备对缓解当前伐区众多分散小型山楞原木装车的困难局面，具有实际指导意义。     

Fire-resistant performance of a laminated veneer lumber joint with metal plate connectors protected with graphite phenolic sphere sheeting

Creep under fire of laminated veneer lumber (LVL) joined with metal connectors was studied. The fire-resistant performance of LVL butt joints connected with metal plates protected with graphite phenolic sphere (GPS) sheeting was discussed. The GPS sheeting was overlaid on the joint in different sizes and locations. The joint was exposed to a burner with a top flame temperature of 800°C and loaded with a load of 200 N to test for creep under fire. The results showed that the fire-resistant performance of the joint was markedly improved by the sheeting. The size and location of the GPS sheet significantly affected the time to rupture of the specimen, which was six times longer than that without GPS. Temperature measurements at the joint showed that the GPS sheeting distributed the heat along the surface and delayed failure. Thermographic images and analyses clarified the improvement in fire-resistant properties due to GPS.     

Screening method for wood extractives: direct cellulose thin-layer chromatography plate

A method for screening wood extractives was developed using cellulose thin-layer chromatography plate (Cell-TLC) separation and was directly applied to bioassays. Wood meal (60 mesh) from nangka (Artocarpus heterophyllus Lamk) heartwood was extracted with hot methanol. The crude extract was separated using a Cell-TLC plate (50 × 50mm). Two broad bands with R_f values of 0.46 and 0.96 were found, and the bands showed completely different effects against the pest termite Coptotermes formosanus Shiraki and the decay fungus Fomitopsis palustris. The band with R_f 0.46 was preferentially consumed by workers of C. formosanus, and it did not show any growth inhibition against F. palustris when the Cell-TLC plate was directly exposed to the organism. In contrast, the band with R_f 0.96 appeared to repel strongly the feeding by C. formosanus and inhibited the growth of F. palustris. It was concluded that the Cell-TLC system was applicable for screening wood extracts consisting of many compounds.     

Phenotypic and genotypic characterization of canine pyoderma isolates of Staphylococcus pseudintermedius for biofilm formation

Biofilm-forming ability is increasingly being recognized as an important virulence factor in several Staphylococcus species. This study evaluated the biofilm-forming ability of sixty canine derived clinical isolates of S. pseudintermedius, using three phenotypic methods, microtiter plate test (MtP), Congo red agar method (CRA) and tube adherence test, and the presence and impact of biofilm-associated genes (icaA and icaD). The results showed that icaA and icaD genes were detected concomitantly in 55 (91.7%) of 60 isolates. A majority (88.3%) of the strains screened had matching results by the tube adherence test, MtP and PCR analysis. Better agreement (95%) was found between the PCR-based analysis and the CRA. Results of the icaA and icaD gene PCRs showed good agreement with CRA results, with a kappa of 0.7. Comparing the phenotypic methods, the statistical analysis showed that the agreement among the phenotypical tests using categorical data was generally good. Considering two classes (biofilm producer and biofilm non-producer), the percentage of matching results between the CRA method and the tube adherence test and between the CRA method and the MtP was 93.3%. A concordance of 100% was revealed between the MtP and the tube adherence test. The results indicate a high prevalence of the ica genes within S. pseudintermedius isolates, and their presence is associated with in vitro formation of a biofilm. A combination of phenotypic and genotypic tests is recommended for investigating biofilm formation in S. pseudintermedius.     

Na?ve-like conversion enhances the difference in innate in vitro differentiation capacity between rabbit ES cells and iPS cells

Quality evaluation of pluripotent stem cells using appropriate animal models needs to be improved for human regenerative medicine. Previously, we demonstrated that although the in vitro neural differentiating capacity of rabbit induced pluripotent stem cells (iPSCs) can be mitigated by improving their baseline level of pluripotency, i.e., by converting them into the so-called “naïve-like” state, the effect after such conversion of rabbit embryonic stem cells (ESCs) remains to be elucidated. Here we found that naïve-like conversion enhanced the differences in innate in vitro differentiation capacity between ESCs and iPSCs. Naïve-like rabbit ESCs exhibited several features indicating pluripotency, including the capacity for teratoma formation. They differentiated into mature oligodendrocytes much more effectively (3.3–7.2 times) than naïve-like iPSCs. This suggests an inherent variation in differentiation potential in vitro among PSC lines. When naïve-like ESCs were injected into preimplantation rabbit embryos, although they contributed efficiently to forming the inner cell mass of blastocysts, no chimeric pups were obtained. Thus, in vitro neural differentiation following naïve-like conversion is a promising option for determining the quality of PSCs without the need to demonstrate chimeric contribution. These results provide an opportunity to evaluate which pluripotent stem cells or treatments are best suited for therapeutic use.     

基于Comsol和BBD的折流板太阳能空气集热器结构优化

太阳能空气集热器是太阳能干燥系统的重要部件,集热器结构设计对集热性能具有重要影响。设计一款基础折流板集热器,通过太阳能模拟器测试集热器在一定边界和材料参数条件下的出口温度。基于Solidworks和Comsol构建集热器三维实体模型,采用reliable k ε湍流模型数值研究集热器的集热性能。结果表明,出口温度试验值和模拟值相对误差小于0.70%,数值模拟有效,可靠性高。基于BBD（Box Behnken Design）试验和响应面法,研究折流板不同倾斜角度组合对集热性能的影响,分析试验结果得到最佳参数组合：折流板1倾斜角度为-10°,折流板2倾斜角度为10°,折流板3倾斜角度为-10°,折流板4倾斜角度为10°,并以此优化集热器折流板布置,得到一款倾斜折流板集热器。与基础折流板集热器相比,倾斜折流板集热器出口温度升高1.63 K,集热效率提升4.01%,入口、出口压力损失降低44.80%。基于流体旁通效应,对折流板进行开孔,进一步优化吸热板的积热和流场分布,得到一款开孔型倾斜折流板集热器。与基础折流板集热器相比,开孔型倾斜折流板集热器出口温度升高2.03 K,集热效率提升4.99%,入口、出口压力损失降低43.13%。对开孔型倾斜折流板集热器入口风速条件进行单因素试验,得到较优的入口风速条件,即0.5~1.0 m/s,可以满足农产品太阳能干燥需求。