Effects of soybean variety and Bradyrhizobium strains on yield,protein content and biological nitrogen fixation under cool growing conditions in Germany

Soybean (Glycine max (L.) Merr.) is able to fix atmospheric nitrogen in symbiosis with the bacteria Bradyrhizobium japonicum. Because these bacteria are not native in European soils, soybean seeds must be inoculated with Bradyrhizobium strains before sowing to fix nitrogen and meet their yield potential. In Central Europe soybean cultivation is still quite new and breeding of early maturing soybean varieties adapted to cool growing conditions has just started.Under these low temperature conditions in Central Europe the inoculation with different, commercially available Bradyrhizobium inoculants has resulted in unsatisfactory nodulation. The aim of this study was: (i) to test the ability of commercially available inoculants to maximize soybean grain yield, protein content and protein yield, (ii) to study the interaction of different inoculants with different soybean varieties for two different sites in Germany under cool growing conditions over three years and (iii) to determine the variability of biological nitrogen fixation. Field trials were set up on an organically managed site at the Hessische Staatsdomäne Frankenhausen (DFH) and on a conventionally managed site in Quedlinburg (QLB) for three consecutive seasons from 2011 to 2013. Three early maturing soybean varieties—Merlin, Bohemians, Protina—were tested in combination with four different Bradyrhizobium inoculants—Radicin No.7, NPPL-Hi Stick, Force 48, Biodoz Rhizofilm—and compared with a non-inoculated control. Effective inoculation with Bradyrhizobium strains increased grain yield, protein content and protein yield by up to 57%, 26% and 99%, respectively. Grain yield, protein content and protein yield were generally higher in DFH. Average grain yield was 1634 kg ha⁻¹ in QLB (2012–2013) and 2455 kg ha⁻¹ in DFH (2011–2013), average protein content was 386 g kg⁻¹ in QLB and 389 g kg⁻¹ in DFH and average protein yield was 650 kg ha⁻¹ in QLB and 965 kg ha⁻¹ in DFH. The percentage of nitrogen derived from air (Ndfa) ranged between 40% and 57%. Soybeans inoculated with Radicin No. 7 failed to form nodules, and crop performance was identical to the non-inoculated control. Biodoz Rhizofilm, NPPL Hi-Stick and Force 48 are suitable for soybean cultivation under cool growing conditions in Germany. Interactions between soybean variety and inoculant were significant for protein content and protein yield at both sites, but not for nodulation, grain yield, thousand kernel weight and Ndfa. The variety Protina in combination with the inoculant Biodoz Rhizofilm can be recommended for tofu for both tested sites, while Merlin and Protina in combination with Biodoz Rhizofilm are recommended for animal fodder production in DFH. Animal fodder production was not profitable in QLB due to low protein yields.     

我国有机水稻发展对策探析

阐述了我国发展有机水稻的积极意义，分析了有机水稻发展的制约因素，并提出了我国政府提高对有机水稻生产的支撑、扶持龙头企业的壮大发展、加强市场监管、采用合理的方式组织规模生产、实行科学种田等措施促进有机水稻良性发展。     

二氧化碳基塑料降解性能的研究

[目的]研究二氧化碳基塑料的降解性能.[方法]以PPC为原料,通过生物降解、热氧化降解和光降解研究了PPC的降解性能.利用乌式粘度计测定了降解过程中PPC塑料的分子量变化;利用傅里叶变换红外光谱仪表征了降解过程中PPC的红外光谱特性.[结果]PPC薄膜在27℃恒温培养箱中生物降解15 d后,降解效果明显.180℃热氧化降解36 h,PPC塑料的分子量减少了63％.光氧化降解5d后,PPC塑料的分子量减少了约85％.[结论]与生物降解相比,PPC塑料的热氧化和光降解程度更为明显.     

退化高寒草甸斑块根—土复合体特征研究

高寒草甸斑块的根-土复合体对局部水土流失过程具有调控作用,为研究其特征及抗侵蚀效应,本研究选取三江源区达日县境内典型中度退化草甸的植被斑块为研究对象,调查草甸斑块中心与边缘植物群落特征,测定斑块边缘0～10 cm土层和斑块中心0～20 cm土层的容重、含水率、毛管孔隙度等土壤物理性质,并开展单根拉伸和根-土复合体直剪试验。结果表明：受优势种矮嵩草的分布影响,地上生物量主要分布在斑块中心,根系主要分布在0～10 cm土层;斑块中心区域土壤抗剪强度、内摩擦角和粘聚力均随土层深度的增加而减小;斑块边缘区域土壤粘聚力,抗剪强度明显高于斑块中心区域,草甸斑块植物根系是土壤抗剪强度的主要影响因素。草甸斑块根-土复合体能明显增加退化草甸土壤的抗侵蚀能力,研究结果可为深入研究高寒草甸根系固土功能及水土流失调控提供科学依据。     

施肥对不同品种麦田CO2通量的影响

为探讨施肥对小麦田间CO2释放量的影响,本研究设计以4个不同施肥水平为主处理,以3个不同年代的主栽品种碧玛1号、烟农15号、山农11号为研究对象,采用封闭式静态暗箱技术,应用LI-6400型便携式光合仪(美国)在作物生长期测定土壤CO2释放量和光合速率。同时测定了环境影响因素土壤温度和水分等。研究结果表明,施肥有利于增加土壤CO2释放量,且中氮处理水平释放量最多;土壤温度和水分对土壤CO2释放量有一定的影响,土温越高,水分越大,CO2释放越多;麦田CO2交换量与小麦根系活性呈正相关。     

Temporal-spatial Filtering in the Preprocessing of Clinical EEG Signals

EEG spot-recording for clinical patients in the bed is always advocated due to easing patients and making them comfortable. But EEG signals recorded in the ward exposed to various noisesand interference is less effective in the EEG analysis. Atemporal-spatial filter is designed for noise removing of clinical EEG signals, the first filtering is temporal filtering using band-pass filter, and the second filtering is spatial filtering with ICA-based spatial filter. Experimental results indicate that various noises and interferences, such as power interference, blinking, eyes movements, muscle moments, ECG artifacts, etc., are removed effectively, individually or simultaneously.     

Harmonic Analysis and Suppression of High-frequency Welding Devices

This paper analyzes the structure and line current waveform of 3-phase AC voltage regulation circuit. As an application of 3-phase AC voltage regulation circuit, a high-frequency welding device's simulation model and harmonic analysis of line current are presented. Results of simulation are compared to field measurements. The two are in a good agreement, so this simulation model is correct. Two single-tuning filters and one second-order HPF are designed according to the device's harmonic condition. Simulation results of the circuit with filters indicate decrease of the harmonics in current of power supply, and the waveform is close to sinusoidal wave, which prove correctness of the solution to harmonics pollution.     

Portable ECG Monitor Front- ended Design with C8051 F020

The electrocardiogram (ECG) signal is a recording of the electrical activity on the body surface generated by the heart frequency of which is weak and low. Many researchers devote themselves to get more perfect ECG in many ways. This article introduces the characterize of an ECG signal , then discusses the requirements for the sampling circuit of an ECG. Since there are some shortcoming in common design means, the authors give an effective circuit. The system is composed of a low-cost , low-power and high-performance MCU C8051F020 , amplifier AD620 , right-leg drive circuit ,communication circuit and power management circuit. Then software design is given which is used to sampling and filtering ECG signal. Levkov filter arithmetic and smooth filter arithmetics are used in this design. In the end , the authors advance a distributing and networking ECG monitor system.