An integrated hydro-economic modelling framework to evaluate water allocation strategies II: Scenario assessment

In this paper the results of an assessment of the hydrological and economic implications of reallocating water in the Musi sub-basin, a catchment within the Krishna Basin in India, are reported. Policy makers identified a number of different but plausible scenarios that could apply in the sub-basin, involving; supplying additional urban demand from agricultural allocations of water, implementing a number of demand management strategies, changing the timing of releases for hydropower generation, changing the crops grown under irrigation, reducing existing stream flows and allowing for more environmental flows. The framework chosen to undertake this assessment was a simulation model that measures and compares the economic values of water allocation scenarios determined from a water allocation model that accounts for supplies of groundwater and surface water across a number of regions and over a variety of uses. Policy makers are provided with the range of measures on the security of the supply of water and the social costs and benefits of reallocating water between sectors and across regions within the sub-basin. Taking water from agriculture to supply urban users has a greater impact on irrigation supplies during dry years. It was also found that changing the allocation of water between sectors, by taking it away from agriculture had a large positive economic impact on the urban sector. Yet the costs involved in undertaking such a strategy results in a significant loss in the net present value of the scheme. Stream flow reductions, if significantly large (at around 20%), were found to have a large physical and economic impact on the agricultural sector. Implementing water saving strategies in Hyderabad was found to be more cost effective than taking water from agriculture, if rainwater tanks are used to achieve this. Changing the timing of hydropower flows resulted in best meeting of irrigation demand in NSLC and NSRC. Under this scenario, the crops grown under irrigation were found to have a significant economic impact on the sub-basin, but not as large as farmers undertaking crop diversification strategies, ones which result in farmers growing less rice. The security of supplying water to different agricultural zones has significantly improved under this scenario. Finally, releasing water for environmental purposes was found to have only a minor impact on the agricultural sector.     

Effects of water infiltration and storage in cultivated soil on surface irrigation

Surface irrigation analysis and design require the knowledge of the variation of the cumulative infiltration water Z (L) (per unit area) into the soil as a function of the infiltration time t (T). The purpose of this study is to evaluate water infiltration and storage under surface irrigation in an alluvial clay soil cultivated with grape yield, and to determine if partially wetted furrow irrigation has more efficient water storage and infiltration than traditional border irrigation. The two irrigation components considered were wet (WT) and dry (DT) treatments, at which water applied when available soil water reached 65% and 50%, and the traditional border irrigation control. Empirical power form equations were obtained for measured advance and recession times along the furrow length during the irrigation stages of advance, storage, depletion and recession. The infiltration (cumulative depth, Z and rate, I) was functioned to opportunity time (t_o) in minute for WT and DT treatments as: Z_WT = 0.528 t_o^0.6, Z_DT = 1.2 t_o^0.501, I_WT = 19 t_o^−0.4, and I_DT = 36 t_o^−0.498. The irrigation efficiency and soil water distribution have been evaluated using linear distribution and relative schedule depth. Coefficient of variation (CV) was 5.2 and 9.5% for WT and DT under furrow irrigation system comparing with 7.8% in border, respectively. Water was deeply percolated as 11.88 and 19.2% for wet and dry furrow treatments, respectively, compared with 12.8% for control, with no deficit in the irrigated area. Partially wetted furrow irrigation had greater water-efficiency and grape yield than both dry furrow and traditional border irrigations, where application efficiency achieved as 88.1% for wet furrow irrigation that achieved high grape fruit yield (30.71 Mg/ha) and water use efficiency 11.9 kg/m³.     

Interactive responses to water deficits and crop load in olive (Olea europaea L., cv. Morisca). II: Water use, fruit and oil yield

To understand the relations between water use and yield in response to crop load, two experiments were conducted in olive (cv. Morisca), during six consecutive years (2002-2007) in an experimental orchard located in Badajoz, Southwest Spain. Experiment 1, assessed the responses during the early years of the orchard (2002-2004) using four irrigation treatments that applied fractions of the estimated crop evapotranspiration (ET_c) (125%, 100%, 75% and 0%) and three crop load levels (100%, 50% and 0% of fruit removal, termed Off, Medium and On treatments). Experiment 2 assessed the response of more mature trees (2005-2007) to three irrigation treatments (115%, 100%, and 60% of ET_c) and the natural crop load which were Off, On, and Medium in 2005, 2006 and 2007, respectively. Yield was reduced by water deficits and so did the estimated tree transpiration which was linearly related to yield (y = 1.2302x − 21.15, R² = 0.8864), showing the high sensitivity of cultivar Morisca to water deficits. The relations between fruit number and fruit weight showed that high crop loads had lower fruit weights and oil yield, a decrease that was more pronounced as water deficits increased. The yield response to water supply in the control and excess treatments, and the observations on the water relations of these two treatments suggest that the calculations made using the FAO method (Doorenbos and Pruit, 1974) with the crop coefficient proposed by Pastor et al. (1998) and the reduction coefficient (Fereres et al., 1982) to apply 100% of ET_c in the control treatment, underestimated the ET_c of the orchard. The results indicate that, although the absence of fruits lead to reduced water use as compared to situations of medium and high crop loads, canopy size was much more determinant of orchard water requirements than crop load.     

Soil salinity related to physical soil characteristics and irrigation management in four Mediterranean irrigation districts

Irrigated agriculture is threatened by soil salinity in numerous arid and semiarid areas of the Mediterranean basin. The objective of this work was to quantify soil salinity through electromagnetic induction (EMI) techniques and relate it to the physical characteristics and irrigation management of four Mediterranean irrigation districts located in Morocco, Spain, Tunisia and Turkey. The volume and salinity of the main water inputs (irrigation and precipitation) and outputs (crop evapotranspiration and drainage) were measured or estimated in each district. Soil salinity (EC_e) maps were obtained through electromagnetic induction surveys (EC_a readings) and district-specific EC_a-EC_e calibrations. Gravimetric soil water content (WC) and soil saturation percentage (SP) were also measured in the soil calibration samples. The EC_a-EC_e calibration equations were highly significant (P < 0.001) in all districts. EC_a was not significantly correlated (P > 0.1) with WC, and was only significantly correlated (P < 0.1) with soil texture (estimated by SP) in Spain. Hence, EC_a mainly depended upon EC_e, so that the maps developed could be used effectively to assess soil salinity and its spatial variability. The surface-weighted average EC_e values were low to moderate, and ranked the districts in the order: Tunisia (3.4 dS m⁻¹) > Morocco (2.2 dS m⁻¹) > Spain (1.4 dS m⁻¹) > Turkey (0.45 dS m⁻¹). Soil salinity was mainly affected by irrigation water salinity and irrigation efficiency. Drainage water salinity at the exit of each district was mostly affected by soil salinity and irrigation efficiency, with values very high in Tunisia (9.0 dS m⁻¹), high in Spain (4.6 dS m⁻¹), moderate in Morocco (estimated at 2.6 dS m⁻¹), and low in Turkey (1.4 dS m⁻¹). Salt loads in drainage waters, calculated from their salinity (EC_dw) and volume (Q), were highest in Tunisia (very high Q and very high EC_dw), intermediate in Turkey (extremely high Q and low EC_dw) and lowest in Spain (very low Q and high EC_dw) (there were no Q data for Morocco). Reduction of these high drainage volumes through sound irrigation management would be the most efficient way to control the off-site salt-pollution caused by these Mediterranean irrigation districts.     

Comparison of drip and sprinkler irrigation strategies on sunflower seed and oil yield and quality under Mediterranean climatic conditions

This study compares the effects of different irrigation regimes on seed yield and oil yield quality and water productivity of sprinkler and drip irrigated sunflower (Helianthus annus L.) on silty-clay-loam soils in 2006 and 2007 in the Mediterranean region of Turkey. In sprinkler irrigation a line-source system was used in order to create gradually varying irrigation levels. Irrigation regimes consisted of full irrigation (I₁) and three deficit irrigation treatments (I₂, I₃ and I₄), and rain-fed treatment (I₅). In the drip system, irrigation regimes included full irrigation (FI-100), three deficit irrigation treatments (DI-25, DI-50, DI-75), partial root zone drying (PRD-50) and rain-fed treatment (RF). Irrigations were scheduled at weekly intervals both in sprinkler and drip irrigation, based on soil water depletion within a 0.90 m root zone in FI-100 and I₁ plots. Irrigation treatments influenced significantly (P < 0.01) sunflower seed and oil yields, and oil quality both with sprinkler and drip systems. Seed yields decreased with increasing water stress levels under drip and sprinkler irrigation in both experimental years. Seed yield response to irrigation varied considerably due to differences in soil water contents and spring rainfall distribution in the experimental years. Although PRD-50 received about 36% less irrigation water as compared to FI-100, sunflower yield was reduced by an average of 15%. PRD-50 produced greater seed and oil yields than DI-50 in the drip irrigation system. Yield reduction was mainly due to less number of seeds per head and lower seed mass. Soil water deficits significantly reduced crop evapotranspiration (ET), which mainly depends on irrigation amounts. Significant linear relationships (R² = 0.96) between ET and oil yield (Y) were obtained in each season. The seed yield response factors (ky_seed) were 1.24 and 0.86 for the sprinkler and 1.19 and 1.06 for the drip system in 2006 and 2007, respectively. The oil yield response factor (ky_oil) for sunflower was found to be 1.08 and 1.49 for both growing seasons for the sprinkler and 1.36 and 1.25 for the drip systems, respectively. Oil content decreased with decreasing irrigation amount. Consistently greater values of oil content were obtained from the full irrigation treatment plots. The saturated (palmitic and stearic acid) and unsaturated (oleic and linoleic acid) fatty acid contents were significantly affected by water stress. Water stress caused an increase in oleic acid with a decrease in linoleic acid contents. The palmitic and stearic acid concentrations decreased under drought conditions. Water productivity (WP) values were significantly affected by irrigation amounts and ranged from 0.40 to 0.71 kg m⁻³ in 2006, and from 0.69 to 0.91 kg m⁻³ in 2007. The PRD-50 treatment resulted in the greatest WP (1.0 kg m⁻³) and irrigation water productivity (IWP) (1.4 kg m⁻³) in both growing seasons. The results revealed that under water scarcity situation, PRD-50 in drip and I₂ in sprinkler system provide acceptable irrigation strategies to increase sunflower yield and quality.     

Performance assessment of small irrigation schemes along the Mauritanian banks of the Senegal River

Irrigation plays a fundamental role in world food provision but, to date, it has performed below expectations in Sub-Saharan Africa. The present study assesses and diagnoses the performance of 22 small and medium size community-managed irrigation schemes, mainly devoted to rice production, in different locations along the Mauritanian banks of the Lower Senegal River. The evaluations followed the Rapid Appraisal Process in which semi-structured interviews were held with representatives of the Cooperatives’ Boards in charge of each scheme to obtain information about the organisation of the cooperative, land tenure, irrigation system and organization, cropping pattern and soils. Additionally, for each irrigation scheme, the water-delivery service was characterized by making qualitative and comparative observations during field inspections; the pumping station's performance was diagnosed by a local specialist; the discharge at the head of the system was measured; daily irrigation time was recorded; and crop yields were determined by plot sampling. Then a set of performance indicators was computed. Water delivery capacity referred to irrigated areas was insufficient in a third of the schemes, and this insufficiency was exacerbated by poor maintenance. Irrigation intensity in habilitated areas was rather low being less than 0.66 in 50% of the schemes. The average productivity of land, irrigation water, and fuel (3.38 t ha⁻¹, 0.30 kg m⁻³ and 2.37 kg kWh⁻¹, respectively) were well below potential.     

Comparisons of energy balance and evapotranspiration between flooded and aerobic rice fields in the Philippines

The seasonal and annual variability of sensible heat flux (H), latent heat flux (LE), evapotranspiration (ET), crop coefficient (K_c) and crop water productivity (WP_ET) were investigated under two different rice environments, flooded and aerobic soil conditions, using the eddy covariance (EC) technique during 2008-2009 cropping periods. Since we had only one EC system for monitoring two rice environments, we had to move the system from one location to the other every week. In total, we had to gap-fill an average of 50-60% of the missing weekly data as well as those values rejected by the quality control tests in each rice field in all four cropping seasons. Although the EC method provides a direct measurement of LE, which is the energy used for ET, we needed to correct the values of H and LE to close the energy balance using the Bowen ratio closure method before we used LE to estimate ET. On average, the energy balance closure before correction was 0.72 ± 0.06 and it increased to 0.99 ± 0.01 after correction. The G in both flooded and aerobic fields was very low. Likewise, the energy involved in miscellaneous processes such as photosynthesis, respiration and heat storage in the rice canopy was not taken into consideration.Average for four cropping seasons, flooded rice fields had 19% more LE than aerobic fields whereas aerobic rice fields had 45% more H than flooded fields. This resulted in a lower Bowen ratio in flooded fields (0.14 ± 0.03) than in aerobic fields (0.24 ± 0.01). For our study sites, evapotranspiration was primarily controlled by net radiation. The aerobic rice fields had lower growing season ET rates (3.81 ± 0.21 mm d⁻¹) than the flooded rice fields (4.29 ± 0.23 mm d⁻¹), most probably due to the absence of ponded water and lower leaf area index of aerobic rice. Likewise, the crop coefficient, K_c, of aerobic rice was significantly lower than that of flooded rice. For aerobic rice, K_c values were 0.95 ± 0.01 for the vegetative stage, 1.00 ± 0.01 for the reproductive stage, 0.97 ± 0.04 for the ripening stage and 0.88 ± 0.03 for the fallow period, whereas, for flooded rice, K_c values were 1.04 ± 0.04 for the vegetative stage, 1.11 ± 0.05 for the reproductive stage, 1.04 ± 0.05 for the ripening stage and 0.93 ± 0.06 for the fallow period. The average annual ET was 1301 mm for aerobic rice and 1440 mm for flooded rice. This corresponds to about 11% lower total evapotranspiration in aerobic fields than in flooded fields. However, the crop water productivity (WP_ET) of aerobic rice (0.42 ± 0.03 g grain kg⁻¹ water) was significantly lower than that of flooded rice (1.26 ± 0.26 g grain kg⁻¹ water) because the grain yields of aerobic rice were very low since they were subjected to water stress.The results of this investigation showed significant differences in energy balance and evapotranspiration between flooded and aerobic rice ecosystems. Aerobic rice is one of the promising water-saving technologies being developed to lower the water requirements of the rice crop to address the issues of water scarcity. This information should be taken into consideration in evaluating alternative water-saving technologies for environmentally sustainable rice production systems.     

Evaluation of fertigation scheduling for sugarcane using a vadose zone flow and transport model

Micro-irrigation has become an optimal means for providing water and nutrients to crops. There is an ample space for improving fertilizer use efficiency with micro-irrigation, if the movement and reactions of fertilizers in the soil are well understood. However, the rhizosphere dynamics of nutrients is very complex, depending on many factors such as soil temperature, pH, water content, and soil and plant characteristics. Many factors cannot be easily accurately quantified. However, using state-of-the-art modelling techniques, useful and reliable information can be derived.An attempt was made to evaluate the reactive transport of urea in the root zone of a sugarcane crop under drip irrigation, and to quantify the fluxes of urea, ammonium, and nitrate into the crop roots, volatilization fluxes, and deep drainage using a numerical model. This quantification helped in designing an optimal fertigation schedule. Various parameters used in the model were taken from either the literature or the field study. A typical scenario, based on the recommended total quantity of urea for sugar cane crop under drip irrigation in India, was tested using HYDRUS-2D. The total amount of urea was divided into fortnightly doses, depending on the stage of crop growth. For this scenario, the modelled crop uptake was found to be 30% higher than the crop demand. Consequently, an optimal fertigation schedule was developed that reduced the use of urea by 30% while at the same time providing enough N for its assimilation at all stages of crop growth. This type of modelling study should be used before planning field experiments for designing optimal fertigation schedules.     

Response of hot pepper (Capsicum annuum L.) to mulching practices under planted greenhouse condition

Mulch is considered a desirable management technology for conserving soil moisture, improving soil temperature and soil quality. This study aimed to investigate soil conditions and hot pepper (Capsicum annuum L.) performance in terms of leaf photosynthetic capacity, fruit yield and quality, and irrigation water use efficiency (IWUE) under such practices in greenhouse condition. A field experiment across 3 years was carried out with four types of mulch (without mulch [CK], wheat straw mulch [SM], plastic film mulch [FM], and combined mulch with plastic film and wheat straw [CM]). Mulch could improve soil physical properties regardless of mulch materials. FM and CM treatments improved soil moistures status and soil temperature in comparison to CK control, while SM increased soil water content and decreased soil temperature. Mulch increased leaf net photosynthesis rate (P_N), stomatal conductance to water vapor (gs), intercellular CO₂ concentration (Ci), and transpiration rate (E), but declined instant water use efficiency (WUEi). No significant effect of mulch application on chlorophyll fluorescence was existent for the entire growth season. Fruit yield and irrigation water use efficiency (IWUE) showed some increment under all the mulch conditions. Compared to CK, the yield was enhanced by 82.3%, 65.0%, and 111.5% in 2008; 38.1%, 17.4%, and 46.5% in 2009; and 14.3%, 6.5%, and 19.6% in 2010 under SM, FM, and CM conditions, respectively. Although FM produced better fruit quality than other treatments, CM is the recommended practice for hot pepper cultivation in greenhouse condition due to working well to facilitate soil condition (moisture and temperature), plant growth, and marketable yield.     

Quantifying the effect of Managed Aquifer Recharge on the microbiological human health risks of irrigating crops with recycled water

Managed Aquifer Recharge (MAR) is increasingly being used for water recycling via aquifers and recovery for irrigation. Quantitative Microbial Risk Assessment (QMRA) was used to assess the human health risks from irrigation using reclaimed water and to evaluate the reduction in risk where MAR is used for irrigation management. Four MAR sites (Shafdan, Israel; Nardò, Italy; Bolivar, Australia; and Sabadell, Spain) that use reclaimed water for crop and/or park irrigation were evaluated, and the risk to human health was quantified in terms of DALYs (Disability Adjusted Life Years). The results indicated that median risks for all scenarios and pathogens evaluated were acceptable (<10⁻⁶ DALYs) with the exception of risks from accidental aerosol ingestion and bacterial pathogens at the Nardò site. MAR was found to be one of the most important treatment barriers in terms of log₁₀ inactivation credits and hence a useful tool for recycled water irrigation management. The Shafdan site relied almost completely on the MAR treatment to reduce the human health risks from irrigation to acceptable levels. For the Nardò site MAR was also an important barrier, where if MAR had not been used as part of the irrigation system the risk would be unacceptable for protozoa and viruses. The Bolivar and Sabadell sites had much larger and more technologically complex recycled water treatment systems and as such MAR was not a critical barrier in managing human health risks.