几种经济红藻中茉莉酸合成途径的关键物质

为研究几种经济红藻中茉莉酸合成途径的关键物质,实验采用液相色谱—质谱联用技术(LC-MS)对茉莉酸生物合成途径相关物质建立检测方法,并对龙须菜、坛紫菜受到机械损伤时各物质的变化情况进行检测。以100%甲醇提取茉莉酸(JA)、茉莉酸甲酯(MeJA)、12-氧-植物二烯酸(12-OPDA)和13-氢过氧化亚麻酸(13-HpOTE),利用XBridge TM C18色谱柱,以甲醇/水为流动相分离4种物质。优化条件下4种物质得到良好分离,加标回收率为81.23%～90.25%,检测限为0.04～0.56 ng/mL,灵敏度高。坛紫菜、龙须菜和真江蓠3种红藻中,坛紫菜中未检测到JA和13-HpOTE,4种物质均在另外2种藻中检测到。龙须菜受机械损伤胁迫后,4种物质在短时间内得到积累,其中13-HpOTE响应迅速。研究表明,红藻中可能存在类似于植物的茉莉酸合成途径,并参与对损伤的胁迫响应。     

杂交晚稻机插不同播量条件下育插秧试验研究

以杂交晚稻“江四优992”为供试材料,进行了不同播量软盘育秧机插与常规水育秧手插的对比试验。结果表明：机插软盘育秧随播种量增加,漏插率降低,以90～100g芽谷／盘为最佳播量;机插秧虽然前期分蘖稍慢,但后期具有分蘖稳健、无效分蘖少、成穗率高的特点;机插稻的全生育期比手插稻延长2～3d;与手插稻相比,机插稻的穗粒结构合理,穗粒数多,产量高,平均增产10．2％。     

May the Force (Field) Be with You: On the Importance of Conformational Searches in the Prediction of NMR Chemical Shifts

NMR data prediction is increasingly important in structure elucidation. The impact of force field selection was assessed, along with geometry and energy cutoffs. Based on the conclusions, we propose a new approach named mix-J-DP4, which provides a remarkable increase in the confidence level of complex stereochemical assignments—100% in our molecular test set—with a very modest increment in computational cost.     

Preparation and Characterization of Tilapia Collagen-Thermoplastic Polyurethane Composite Nanofiber Membranes

Marine collagen is an ideal material for tissue engineering due to its excellent biological properties. However, the limited mechanical properties and poor stability of marine collagen limit its application in tissue engineering. Here, collagen was extracted from the skin of tilapia (Oreochromis nilotica). Collagen-thermoplastic polyurethane (Col-TPU) fibrous membranes were prepared using tilapia collagen as a foundational material, and their physicochemical and biocompatibility were investigated. Fourier transform infrared spectroscopy results showed that thermoplastic polyurethane was successfully combined with collagen, and the triple helix structure of collagen was retained. X-ray diffraction and differential scanning calorimetry results showed relatively good compatibility between collagen and TPU.SEM results showed that the average diameter of the composite nanofiber membrane decreased with increasing thermoplastic polyurethane proportion. The mechanical evaluation and thermogravimetric analysis showed that the thermal stability and tensile properties of Col-TPU fibrous membranes were significantly improved with increasing TPU. Cytotoxicity experiments confirmed that fibrous membranes with different ratios of thermoplastic polyurethane content showed no significant toxicity to fibroblasts; Col-TPU fibrous membranes were conducive to the migration and adhesion of cells. Thus, these Col-TPU composite nanofiber membranes might be used as a potential biomaterial in tissue regeneration.     

施氮量与移栽密度互作对垦粳7号稻米品质的影响

为探讨施氮量及移栽密度对稻米品质的影响,在大田条件下,以垦粳7号为试验材料,采用裂区试验设计,以施氮量(0、90、120、150、180kg.hm-2,N)为主区和移栽密度(20.2万、25.1万、33.3万穴.hm-2,M)为裂区,分析了氮密互作对稻米加工品质、外观品质、营养品质和食味品质的影响.结果表明:移栽密度对...     

Identification of divergent variants of Grapevine virus A

Eight isolates of Grapevine virus A (GVA), which induced different symptoms in leaves of Nicotiana benthamiana, were recovered from various grapevines. The dsRNA patterns of two isolates, which consistently induced mild vein clearing (referred here as mild isolates of GVA) were similar, but different from those of other isolates of GVA. Analysis based on overall nucleotide (nt) sequence identity in the 3 terminal part of the GVA genome, comprising part of ORF3 (putative movement protein, MP), entire ORF4 (capsid protein, CP), entire ORF5 and part of 3 UTR, revealed that GVA isolates separate into three groups (I, II, III), sharing 91.0–99.8% nt sequence identity within groups and 78.0–89.3% nt sequence identity between groups. Mild isolates of the virus were group III and shared only 78.0–79.6% nt sequence identity with the other isolates. The comparison of predicted amino acid sequences for MP and CP revealed many amino acid alterations, revealing distinct local net charges of these proteins for mild isolates of the virus. Based on both conserved and divergent nt regions in the CP and ORF5, oligonucleotide primers were designed for the simultaneous RT-PCR detection of all GVA isolates and for the specific detection of the most divergent virus variants represented here by mild isolates of the virus.     

Analysis of the seed dispersal patterns of wild soybean as a reference for vegetation management around genetically modified soybean fields

There are concerns that genetically modified soybean might threaten the genetic diversity of the wild soybean populations that are distributed in East Asia because genetically modified soybean has no crossing barrier with wild soybean. A simple and effective method to prevent hybridization via pollen flow is spatial separation between the two species because their hybridization occurs only when they grow in close proximity. Therefore, the invasiveness of wild soybean needs to be known in order to secure the appropriate distances. As wild soybean seeds are dispersed mechanically by pod dehiscence, an experiment was conducted in which white sheets were placed on the ground, concentric circles were drawn around the parent plants, and the number of dispersed seeds within each 0.5 m‐wide zone were counted. About 40% of the produced seeds were dispersed and the number of dispersed seeds gradually declined as the distance from the parent plants increased. The model that explained the relationship between the number and distance of the dispersed seeds was produced by using a generalized linear model procedure. More than 95, 99, and 99.9% of the produced seeds stayed within 3.5, 5.0, and 6.5 m after natural pod dehiscence. Knowing these values is useful for evaluating the level of invasive risk by mechanical seed dispersal. The goal of the work is to efficiently and deliberately prevent hybridization by isolating genetically modified soybean fields and wild soybean populations by vegetation management, including weeding and setting up specific‐width buffer zones.     

混杂纤维轻骨料混凝土压拉性能及强度预测

为了研究混杂纤维对浮石轻骨料混凝土力学性能的影响,对聚丙烯纤维掺量为0.6 kg/m³,改变纤维素纤维掺量的6组浮石轻骨料混凝土试块进行立方体抗压和劈裂抗拉试验.结果表明：立方体抗压强度和劈裂抗拉强度都先升高后降低.劈裂抗拉强度增加显著,最优掺量时为3.2 MPa,比基准组增加了77.8%,纤维掺入可以有效阻止裂缝发展并起到增强增韧的作用.最优掺量为聚丙烯纤维掺量0.6 kg/m³,纤维素纤维0.9 kg/m³,此时拉压比相比基准组提高了57.7%,显著改善了其脆性;最优掺量时3,7,14 d早期强度比基准组分别提高了25.2%,20.7%,15.6%.纤维素纤维对早期强度影响较大,根据其力学特性,提出了天然浮石轻骨料混凝土28 d立方体抗压强度的计算公式,并与其他公式进行了对比验证.采用BP神经网络对28 d强度进行预测,并用预测数据对抗压强度计算公式进行验证,验证结果良好.     

不同木质纤维原料对PVC木塑复合材料力学性能的影响

选取6种不同木质纤维制备PVC木塑复合材料,分析木质纤维的基本形态参数及表面接触角,对比研究不同木质纤维制备木塑复合材料的综合力学性能。结果表明：木质纤维长度、长径比及接触角值均较高的材种较适合制备木塑复合材料;在6种不同木质纤维中,纤维长度、长径比和接触角分别为266mm、6535和9032°的杉木制备的木塑复合材料综合力学性能最佳,弯曲强度、弯曲模量、拉伸强度和抗冲击强度分别可达4563、3247、2914MPa和641kJ/m2。     

扑翼飞行器低频大行程组合伞式推进装置设计与试验

传统仿生扑翼飞行器需要在较高的扑动频率下才能获得足够的扑动升力,直接限制其向大型化发展。为解决这一问题,该文基于仿生学原理提出了一种低频大行程组合伞式推进技术,设计了推进装置结构并进行了悬停状态下的试验样机性能测试。结果表明:组合伞式推进装置通过一组扑翼在较低频率下进行同步相反方向的往复运动能够产生有效的推进力;当伞式扑翼向上运动时可以大幅减小其产生的负升力,增大伞翼展长和运动速度,其产生的空气动力均随之增大。与传统柔性扑翼相比,组合伞式扑翼具有较好的推进性能,其推进力与输入功率的比值在0.01～0.04 N/W,高于传统柔性扑翼的测试结果(-0.02～0.01 N/W)。该研究为仿生扑翼向大型化应用提供了参考。