巨桉纸浆原料林土壤养分与林木生长研究

通过相关分析及回归分析，探讨了巨桉人工林土壤养分与林木生长的关系，结果表明：土壤速效N、速效P、土壤有机质的浓度与林木胸径、树高、材积极显著正相关，土壤全N、全P与林木胸径树高、材积显著正相关。建立了胸径、树高、材积与土壤养分的线形回归方程，最佳数学表达式说明速效N、速效P是影响巨桉林生长的关键土壤养分。     

一类挖坑机械钻头横向振动系统的最优控制问题

建立了一类挖坑机械钻头横向振动系统的数学模型,并以阻尼函数作为控制变量,研究了该系统的最优控制问题,得出了两个定理。     

洋葱型大蒜及其成因分析

洋葱型大蒜为大蒜鳞茎异常生理变态所形成的类似洋葱鳞茎结构的大蒜(原称“面包蒜”),该鳞茎主要由肥厚的叶鞘基部及鳞芽的外层鳞片加厚所构成,无肉质鳞片或肉质鳞片极不发达,可形成蒜薹或无薹分化,无任何食用价值。洋葱型大蒜的形成与N、P、K超量施用且配比不当,追N过多且时间过早,土壤过于粘重并长期处于水分饱和状态等有密切关系。     

岷江上游乡村社区贫困成因及扶贫模式初探——以四川黑水国家扶贫开发重点县为例

农村发展包括乡村社区发展和农户发展两个方面 ,二者不能偏废。以岷江上游国家扶贫开发重点县———黑水为例 ,探讨乡村社区贫困成因及扶贫模式。社区贫困是多种因素长期综合作用的结果 ,包括自然环境条件、传统习俗与贫困文化结合、道路交通贫乏、森林资源利用政策以及落后守旧的农业生产技术和手段。乡村社区扶贫不同于区域扶贫 ,应以新村建设和易地迁建为主 ,辅以劳务输出、旅游开发和教育扶持。     

胶合板厂生产规划模型与运用

本文根据胶合板厂实际情况，建立了杨木胶合板厂生产规划模型。该模型考虑各主要设备工段、产品组合、产品混合、产品价格、流动资金、原材料供应以及市场约束等问题。本模型能够满足市场竞争，获取最佳利润，同时还能解决胶合板厂“三板”（表、背、芯单板）不平衡问题。     

Spring invasion of Heterodera schachtii in sugarbeet; a simulation study

A simulation model was developed for the spring invasion of the beet cyst nematode,Heterodera schachtii Schmidt, into sugarbeet roots, according to the state variable approach. This model describes the processes of egghatch, emergence of second stage larvae from cysts, migration to roots and penetration into roots quantitatively, using published data.In 1983 a field experiment was conducted to test this model.H. schachtii cysts were introduced at depths 6–29 cm in PVC-cylinders, buried in the soil. The rooting depth of sugarbeet seedlings, growing in these cylinders, was limited to 5 cm by 50 m mesh nylon gauze. Every 10 days the second stage larvae, which had penetrated into the roots of these seedlings were counted. After 50 days, about 40% of the eggs had hatched. More than 20% of the emerged larvae penetrated if the cysts had been buried undeeply, and only 4% if the cysts had been buried at 29 cm depth.The model predicted the course of penetration into the root during the first 40 days with reasonable accuracy (r²=0.79), but in the 5th period of 10 days the model made an overestimation of more than 100%. Egghatch after 50 days was correctly simulated. The differences in penetration into the root between the model and the experiment might result from an oversimplified simulation of the penetration success or the neglection of mortality of second stage larvae. Detailed experiments should be done to provide better parameters for these factors.Samenvatting Volgens de toestandsvariabele-benadering werd een simulatiemodel ontwikkeld van de voorjaarspenetratie van het bietecystenaaltje. Het model beschrijft aan de hand van literatuurgegevens het uikomen van de eieren, het verlaten van de cyst door de larven, de migratie naar en de penetratie in de wortel.In 1983 werd een veldproef uitgevoerd om het model te toetsen. Cysten vanH. schachtii werden op 5 dieptes tussen 6 en 29 cm ingegraven in PVC-cylinders, welke waren verzonken in de bodem. De bewortelingsdiepte van de suikerbiete-zaailingen die hierin groeiden werd beperkt tot 5 cm door nylon gaas van 50 m maaswijdte. Elke 10 dagen werden de larven geteld die in de wortels van deze plantjes waren gepenetreerd. Na 50 dagen was 40% van de eieren uitgekomen. Meer dan 20% van de gelokte larven penetreerden als de cysten ondiep waren ingegraven, en slechts 4% als de cysten op 29 cm diepte waren ingegraven.Gedurende de eerste 40 dagen werd het verloop van de penetratie in de wortel met redelijke nauwkeurigheid door het model voorspeld (r²=0.79). In de 5e periode van 10 dagen maakte het model echter een overschatting van meer dan 100%. Het uitkomen van de eieren werd correct gesimuleerd. De verschillen in penetratie tussen het model en de proef zouden het gevolg kunnen zijn van een oververeenvoudigde simulatie van het penetratiesucces of van het verwaarlozen van de mortaliteit van de migrerende larven. Betere gegevens hierover zullen moeten komen uit detailproeven.     

加热光纤法同步测定土壤水热参数误差分析

土壤水热参数是研究土壤水热传输的基本物理参数。当前热脉冲探针法（HPP）可同步测定土壤水热参数,但该方法仅限于在点尺度下测定。与其具有相同理论基础的加热光纤法（SPHP-DTS）,可将测定尺度增大至田间千米尺度,但其测定精度尚未得到有效验证。为了探知SPHP-DTS法的误差,本研究进行了SPHP-DTS法与HPP法测定土壤水热参数的对比试验。结果表明,以HPP为标准,加热光纤法测定热导率的精度RMSE为0.13 W?m-1?℃-1。SPHP-DTS法测定的热导率显著高于HPP法,主要原因在于加热光纤时产生的温度效应。通过热导率法测定土壤含水率时,在热导率测定误差的影响下,SPHP-DTS法的测定精度明显低于HPP法。SPHP-DTS法测定土壤水热参数的其他误差来源包括光纤与土壤之间多个界面的接触热阻、光纤的温度敏感性、噪音干扰以及温度梯度驱动下的水分迁移。本研究可为SPHP-DTS法提升土壤水热参数测定精度提供理论参考。     

Stereoselective degradation of ethofumesate in turfgrass and soil

The stereoselective degradation of ethofumesate in turfgrasses and several agricultural soils was investigated to provide details of the fate of this chiral herbicide. Racemic ethofumesate was either foliar applied to two species of turfgrass or fortified into four types of agricultural soils. (+)- and (−)-Enantiomers were extracted and analyzed by a validated chiral HPLC method which involved extraction of samples with organic solvent followed by separation on cellulose-Tris-(3,5-dimethylphenylcarbamate)-based chiral column and quantification by UV absorbance at 230 nm. Mean recoveries of each enantiomer fortified at 0.5, 5, and 10 μg g⁻¹ ranged from 82.3 ± 5.84 to 92.5 ± 2.87% in turfgrasses and from 86.0 ± 5.09 to 98.1 ± 2.51% in soil. As a measure of this composition, the enantiomeric ratio (ER) was used, defined as the concentration ratio of (+)/(−)-enantiomer. Similarly, preferential degradation of the (−)-enantiomer was observed in both grass species with the largest ER of about 3 and in one of the test soil with ER = 1.65, resulting in residues enriched with (+)-enantiomer. This stereoselective degradation in this soil led to significant difference on half-lives between the two enantiomers. No stereoselective degradation was observed in other soils.     

温室网纹甜瓜发育模拟模型研究

 通过研究甜瓜的发育生理生态过程, 建立了以生理发育时间为基础的温室甜瓜发育过程模拟模型, 并利用不同播期、地点和品种的试验资料对模型进行了检验。结果表明, 模型对发芽期、幼苗期、伸蔓期、开花期、结果期等各生育期及全生育期的模拟预测值与实际观测值的符合度较好, 其回归估计标准误差(RMSE) 分别为1、3、2.2、1.8、1.1、2.6 d。     

Breeding objectives for beef cattle used in different production systems: 2. Model application to production systems with the Charolais breed

A general bio-economic model for beef cattle production was used to define breeding objectives for Charolais cattle to be utilized in a variety of linked production systems. Economic weights were calculated for 16 traits (some with both direct and maternal components) in three production systems (pure-breeding and terminal crossing with beef or dairy cows) and two marketing strategies (sale or fattening of weaned surplus calves). Economic weights for the total breeding objective were calculated as weighted averages, where weights were numbers of cows expected to be mated with Charolais bulls in each production system and marketing strategy. Results suggest that the direct component of calving performance and cow longevity were of primary economic importance in all systems. Conception rate of cows and weaning weight reached about 50% of the standardized economic weight of calving performance in purebred systems with sale of weaned calves, whereas in purebred systems with fattening the economic importance of the direct component of cow conception rate, losses at calving, mature weight of cows, weaning weight, and fattening traits were of equal importance (each approximately about 20% that of calving performance). In terminal crossing systems, weaning weight was important when calves were sold at weaning, and fattening traits were important for systems selling fattened animals. The bio-economic model performed well under the conditions of this demonstration and could easily be customized for other applications.