354拖拉机与1.5m旋耕机配套性能分析

通过动力特性分析,解决了拖拉机动力输出轴转速高,输出扭矩较小,不能克服土壤对旋耕机的阻力矩,无法正常作业的问题.     

旋耕机整机试验模态分析

以试验模态分析为手段，研究ＩＧ－１８０Ａ旋耕机整机振动模态特征，讨论了模态参数和频响函数分析用于旋耕机设计的问题，提出了旋耕机减重设计中应综合考虑强度可靠性和刚度可靠性的观点，并指出了补偿整体刚度的几种途径。     

旋耕刀曲面典型形状的研究

给出了描述旋耕刀曲面形状特征的３个角度参数：滑切角、起土角及偏切角，对比研究了日本典型旋耕刀ＦＴ８０３及Ｙ１５１和我国国家标准旋耕刀ⅡＴ２４５的这３个角度参数值，指出了旋耕刀曲面形状对其耕作性能和功耗的影响。     

螺旋弯管内流动与传热特性的数值模拟

针对螺旋弯管内的流动与传热特性,以螺旋弯管传热试验中试验件模型为研究对象,基于Realizable k-ε湍流模型、第一类热边界条件下的薄壁热阻模型,对不同进口来流条件下,采用Fluent对螺旋弯管内水的流动与换热进行数值模拟.计算得到了螺旋弯管内速度场与温度场的分布,通过数值模拟结果与试验结果的比较,验证了数值模拟方法的正确性.结果表明:随着进口来流雷诺数的增大,螺旋弯管内的二次流迪恩涡核心向弯管管壁扩张;在螺旋弯管小曲率比、来流雷诺数2 280~6 000内,螺旋弯管的强化换热综合性能最佳;对模拟结果数据利用多元线性回归法,推导出螺旋弯管内换热努赛尔数、进出口压力降的准则关系式.研究结果可为螺旋管式换热器设计与优化提供一定的参考依据.     

计算机编目条件下书次号的选取问题

 

通过对计算机编目条件下种次号与著者号的优劣比较，提出不应该简单地下结论哪种书次号就更科学而轻易选定书次号。应该一切从读者出发，从计算机编目的实践出发来决定书次号的选取。

     

水稻突变体W33高位分蘖特性利用价值研究

为探讨水稻突变体材料W33高位分蘖特性在水稻育种上的利用价值。以野生型水稻恢复系R818及其高节位分蘖突变体W33为试验材料,用盆栽试验研究R818和W33的植株、分蘖和穗部性状差异,用大田栽培控制性试验比较R818和W33分蘖、产量构成性状及子粒产量差异,测得参试材料各性状数据。结果表明,生长前期W33和R818株高、主茎叶均长无明显差异,中后期二者株高、主茎叶均长渐显显著或极显著差异;W33单株平均分蘖数是R818的7.5~8.8倍,平均有效穗数是R818的8.6倍,分蘖平均成穗率与R818相当,但单穗穗长、枝梗数和着粒数明显低于R818,而千粒重与R818无明显差异;W33和R818单株籽粒产量均随密度增大而降低,并以最低密度条件下最高,最高密度条件下最低;尽管W33单穗产量明显低于R818,但在相同栽插密度条件下,W33和R818群体产量差异不显著(F=3.7868<F_0.05,1,4);在一定密度范围内,W33能充分发挥其旺盛的分蘖力和较高的成穗率优势,以弥补单穗产量较低的缺陷,其群体产量最终达到与R818相当的水平。说明W33旺盛的分蘖力和较高的分蘖成穗率特性在水稻育种上具有一定的利用价值。     

基于知识工程的旋耕机刀辊的快速设计系统研究

为了提高旋耕机刀辊的设计效率,建立了一种基于知识工程的对旋耕机刀辊的快速设计系统：在查阅整理旋耕机刀辊设计流程及规则知识的基础上,建立刀辊参数库、规则库、实例库等知识库,选用SQL语言对知识库进行添加、查询、修改;应用基于规则和实例的混合推理方法,以SolidWorks和Visual Studio为系统开发平台,应用API二次开发工具和VB.NET语言开发刀辊的快速设计系统,实现尺寸驱动模型变更和不同农耕农艺要求下刀辊的参数化快速设计。在Intel i5处理器、系统内存8 GB配置环境下,快速设计系统运行 3~5 min即可设计出满足用户需求的刀辊CAD模型并输出文件,满足使用需求。     

不同浓度硝基苯对水稻发芽和秧苗生长发育的影响

试验结果表明,硝基苯浓度达到27倍(0.34 mg/L)以上对水稻发芽产生明显影响,致使芽率下降.不同浓度的硝基苯对不同品种的发芽率影响不显著.随着浓度的增加,同一品种株高基本呈降低趋势,根数、叶片与对照差异显著.     

Crop structure in winter oats and the effect of nitrogen on quality-related characters

The relationship between panicle structure and oat grain quality characteristics was examined in a winter oat (Avena sativa) experiment, cv. Gerald, fertilized with 80 and 200 kg/ha N. Spikelets on each whorl were counted and separated into primary, secondary, and tertiary grains, which were counted and weighed, and the kernels extracted manually and weighed. Tiller and whorl rank had relatively small effects on weight per grain and kernel content. Nitrogen application significantly increased weight per primary and secondary grain on the main stem and T1, the first tiller, while spikelet and grain numbers increased only on T1. However, weight per grain and kernel contents in all whorls on both the main stem and T1 were not significantly affected by nitrogen. Although kernel contents were significantly affected by nitrogen application on some occasions, increases and decreases were less than 2.5%. Across the whole plant, numbers of primary and secondary grains increased at the higher nitrogen application, but weight per primary grain and kernel contents were unaffected. However, weight per secondary grain significantly increased at the higher nitrogen application, thus improving uniformity of grain size which is of value to millers.     

Enhanced kernel set promoted by synchronous pollination determines a tradeoff between kernel number and kernel weight in temperate maize hybrids

Maize (Zea mays L.) grain yield is strongly related to the number of harvested kernels, where kernel number can be increased by synchronously pollinating silks rather than allowing them to be progressively pollinated as they naturally appear from the husks. However, there is scarce evidence on how this practice affects kernel weight (KW) and plant grain yield (PGY), and no report exists on its effects when combined with treatments aimed to reduce apical dominance, like male sterility and detasseling. Field experiments were conducted in two growing seasons (Exp₁ and Exp₂) using two hybrids, cropped at contrasting stand densities (3 and 9 plants per m²) and including (i) male-fertile and male-sterile versions, (ii) tasseled and detasseled plants, and (iii) natural (NP) and synchronous pollination (SP; pollen added manually to ears bagged 5 days after initial silking) systems. Tassel growth of sterile and fertile versions was also evaluated in a separate experiment (Exp₃). Detasseling increased the number of ears per plant reaching silking (P < 0.001) of NP plants, but this beneficial effect of reduced apical dominance did not improve kernel number per plant (KNP) or PGY. Similarly, the early arrest of anther growth in male-sterile plants had no clear benefit on KNP. In contrast, KNP was enhanced by synchronous pollination (range between −13% and +71%; average of +15.4% in Exp₁ and +3.9% in Exp₂). However, this pollination system promoted a decreased in KW (range between −30% and +4%; average of −11.8% in Exp₁ and −7.8 in Exp₂) such that the treatment had no effect on PGY (range between −19% and +37%; average of +1% in Exp₁ and −4% in Exp₂). Because plant growth rate around flowering was not different between pollination treatments, assimilate availability per kernel was reduced from ovary fertilization onwards in synchronously pollinated plants when compared to open pollinated plants. This explains the reduced KW when increasing KNP by synchronous pollination. In summary, none of the imposed treatments allowed grain yield to be increased at the plant level.