土壤水分特征曲线几种标定的对比分析

土壤水分特征曲线的标定是土壤水的能量和数量关系在不同尺度间转换的方法,也是植被生态需水机理研究的重要组成部分。通过对传统的迭代法、一次法和建立的2种混合遗传算法进行比较,标定的结果表明,多项式遗传算法能综合考虑2种方差的影响,并能给出一致性的标定结果,这种经验式混合遗传算法对传统的标定算法进行了改进。     

基于GIS技术的小型水库规划方法

在小流域治理中，为了提高水库规划的精确度和速度，提出了基于GIS技术来实现小型水库规划的方法。主要是基于GIS技术的库客曲线的制作方法；小型水库规划的可视化。在GIS中，真实地形在计算机中的表达用数字高程模型(DEM)表示，水库规划的三维可视化环境的实现需利用0penGL技术。     

水井酸处理效果预测研究

水井酸处理效果预测一直缺乏成熟的方法。提出了根据水位恢复曲线形态和含水层裂隙特征来预测井的首次酸处理效果，经与石油界所用方法有明显不同。石油界普遍认为，只有不位恢复曲线为快速上翘型的低产碳酸盐岩井才适合酸处理（即基质酸化），但作者近年来发现，多数水位恢复曲线为直线型的低产碳酸盐岩井，即井中含水层裂隙平均宽度＜5mm的井，酸处理效果也很好，被调查3眼这类井的单位涌水量增加值平均为423％；水位恢复曲线为缓慢上翘型的井中，部分含水层裂隙被松散物充填的井，采用特殊的酸处理方法处理后，井的单位涌水量可增加100％。另外，采用适当的方法，使用足够数量的酸进行首次酸处理后，水井再进行酸处理一般效果都很差。     

活塞中凸型线数控加工的一种逼近方法

针对发动机活塞纵剖面型线的不规则性,提出了采用3次样条插值和双圆弧拟合相结合逼近加工曲线的方法,推导出了适用于计算机编程的3次样条插值计算公式;分析了双圆弧拟合的原理,并对逼近误差进行分析,满足了加工拟合曲线的要求。     

基于B样条的水泵复杂特性曲线拟合方法

为适应水泵复杂特性曲线中存在大挠度和非等距测点的情况，探索了基于三次均匀B样条的曲线拟合方法。通过局部预测的方法引入新的型值点以克服曲线尖点拟合的困难。根据离散数据点连线的几何形状进行分段，基于最小二乘法分步优化节点的横坐标和纵坐标，得到了最优逼近的B样条拟合曲线。通过实例计算表明，该方法可以高精度地将全区域范围的水泵试验数据拟合成光滑的特性曲线，并能够消除因试验随机误差所引起的曲线扰动。     

Analysis of the uncertainty associated with the estimation of nitrogen losses from farming systems

This work describes the analysis of the uncertainty linked to the annual direct and indirect losses of different nitrogenous compounds at the scale of a group of farms. The nitrogen (N) forms taken into account are: ammonia (NH₃), nitric oxide (NO), nitrous oxide (N₂O), dinitrogen (N₂) and nitrate (NO₃). The gaseous N emissions for the different components of the farms are estimated with a selection of adapted emission factors. The NO₃ losses at the farm scale are calculated as the difference between the surplus of the farm-gate N balance and the gaseous N emissions.     

气吸式免耕播种机种箱振动特性的研究——基于MatLab

利用振动信号采集系统PULSE软件,将加速度传感器安装于种箱附近,将振动信号通过六通道采集卡采集,通过无线网桥发射-接收信号,将信号传送到计算机;利用Mat Lab分析软件,将采集到的信号进行分析处理,得到每个通道的采集振幅图,选取振幅图中若干个频率-振幅坐标值进行Mat Lab数据拟合。结果表明:气吸式免耕播种机主要为低频振动,随着作业速度不同,频谱图的峰值就不同,速度越大,峰值越高且出现峰值的点越多;通过数据拟合可知,拟合直线越顺滑,表明此处振动对种箱排种效果越好。     

Evaluation of the RZWQM-CERES-Maize hybrid model for maize production

The root zone water quality model (RZWQM) was developed primarily for water quality research with a generic plant growth module primarily serving as a sink for plant nitrogen and water uptake. In this study, we coupled the CERES-Maize Version 3.5 crop growth model with RZWQM to provide RZWQM users with the option for selecting a more comprehensive plant growth model. In the hybrid model, RZWQM supplied CERES with daily soil water and nitrogen contents, soil temperature, and potential evapotranspiration, in addition to daily weather data. CERES-Maize supplied RZWQM with daily water and nitrogen uptake, and other plant growth variables (e.g., root distribution and leaf area index). The RZWQM-CERES hybrid model was evaluated with two well-documented experimental datasets distributed with DSSAT (Decision Support System for Agrotechnology Transfer) Version 3.5, which had various nitrogen and irrigation treatments. Simulation results were compared to the original DSSAT-CERES-Maize model. Both models used the same plant cultivar coefficients and the same soil parameters as distributed with DSSAT Version 3.5. The hybrid model provided similar maize prediction in terms of yield, biomass and leaf area index, as the DSSAT-CERES model when the same soil and crop parameters were used. No overall differences were found between the two models based on the paired t test, suggesting successful coupling of the two models. The hybrid model offers RZWQM users access to a rigorous new plant growth model and provides CERES-Maize users with a tool to address soil and water quality issues under different cropping systems.     

西南地区主要类型土壤钾素有效性分析

通过测定西南地区主要类型土壤的基本农化性状、Q/I曲线、固钾率和酸提取钾来研究土壤钾素缓冲容量(PBCK),进而分析土壤钾素的有效性.试验结果表明,PBCK与土壤CEC、固钾率和酸提取均呈极显著正相关,因此可以用PECK来衡量土壤钾素有效性.     

试验数据曲线拟合的简便计算法

着重介绍了以微型计算机为工具对两组有未知关系的试验数据进行回归方差分析及曲线拟合的简单易行的计算方法，介绍了微机程序设计思想及关键，并给出了程序设计框图，对泵的性能测试，喷灌管道水力损失试验及泵站测试数据的处理有一定的指导和借鉴意义。