双季稻最佳磷肥和钾肥用量与密度组合研究

【目的】为明确磷肥、钾肥用量和移栽密度对双季稻的施用效果,在田间试验条件下研究了不同磷肥用量、钾肥用量和移栽密度组合对江西双季稻产量、产量构成要素及磷肥和钾肥利用率的影响。【方法】本研究采用裂区试验设计研究了不同施磷量和移栽密度、不同施钾量和移栽密度对双季稻产量、磷肥和钾肥利用率的影响。磷肥用量和移栽密度试验中,设4个施磷水平(P2O5 0、60、90、120 kg/hm2,以P0、P60、P90和P120表示)和4种移栽密度(21×104、27×104、33×104、39×104 穴/hm2,以D21、D27、D33和D39表示)组合。钾肥用量和移栽密度试验中,设4个施钾水平(K2O 0、90、120、150 kg/hm2,以K0、K90、K120和K150表示),密度设置同磷肥试验。在水稻成熟期对产量以及产量构成要素进行测定,并分析其磷素和钾素的吸收量和利用率等指标。【结果】磷肥与密度试验中,同一施磷水平下,早稻产量和地上部磷素吸收量随着移栽密度的增加而增加,当施磷量超过60 kg/hm2时,产量和磷素吸收量不再随密度增加而显著增加,磷素吸收利用率(REP)、磷素农学效率(AEP)和磷素偏生产力(PFPP)逐步降低,以P60D39处理组合的产量和磷素吸收利用率最高,分别为5303.9 kg/hm2和24.4%,AEP为29.4 kg/kg; 晚稻则以施磷量在60 kg/hm2和33×104 穴/hm2密度组合的产量和磷素吸收利用率最高,分别为7246.9 kg/hm2和42.4%,AEP为36.2 kg/kg。钾肥与密度试验中,早稻的钾素吸收量随着施钾量的增加而增加,施钾量在120 kg/hm2和39×104 穴/hm2密度组合的处理产量和钾素吸收利用率(REK)最高,分别为6376.3 kg/hm2和67.2%,此时钾素农学效率(AEK)为15.6 kg/kg; 晚稻则以施钾量在90 kg/hm2和33×104 穴/hm2密度组合的处理产量和REK最佳,分别为7025.6 kg/hm2和74.0%,AEK为21.7 kg/kg。【结论】合理的磷肥、钾肥用量和移栽密度可以显著增加水稻单位面积有效穗数和养分累积量,进而增加水稻产量和肥料利用率,但过高的磷肥和钾肥施用会抑制产量的进一步增加。建议本研究区域的早稻采用施磷量在60 kg/hm2、施钾量120 kg/hm2和39×104穴/hm2的密度组合,而晚稻采用施磷量60 kg/hm2、施钾量90 kg/hm2和33×104 穴/hm2的密度组合。     

粮食生产潜力短期预测的“趋势-波动模型”的验证

应用全国、31个省、6个典型地区和16个典型县的数据对粮食生产潜力短期预测的"趋势-波动模型"进行了系统性的验证和讨论。研究结果表明:(1)预测误差大小反映短期生产潜力的预测精度,预测误差大的主要原因是经济发达地区高产农田被大量占用和(或)蔬菜、水果种植面积大幅度增加而短期内使粮食单产下降;(2)小趋势修正方法是"趋势-波动模型"中不可缺少的一部分,它能将大趋势预测不能包括的短期如气象因素、科技投入、社会因素等影响纳入预测中,提高预测精度;(3)就我国近些年来的实际情况而言,越是经济发达的地区短期生产潜力的波动越大;同样发达地区短期潜力存在增加-下降-回升阶段;(4)就短期生产潜力预测精度而言:国家级大于省级、省级大于地区级、地区级大于县级;不同省、不同地区、不同县之间预测精度差别比较大,这与境内气候的互补性和农田抗御自然灾害的能力有关。     

玉米粒重一致性QTL整合图谱的构建及元分析

为进一步研究候选基因发掘、克隆以及基因组结构,在生物信息学基础上,利用公共网络资源上已发表的149个玉米粒重相关QTL位点信息,初步探讨了玉米粒重"一致性"QTL发掘。结果表明:构建出一个包含了80个玉米粒重QTL位点的整合图谱,并在第7染色体上确定出一个"一致性"QTL,由标记bcd349和gpm760a界定,置信区间为463.29~505.50,间距42.21cM。     

Preliminary study of endocytosis-related gene mRSD-9

AIM: To study the function of the gene mRSD-9 . METHODS: The techniques of immunoprecipitation and immunofluorescence were applied to verify the interaction between mRSD-9 and endophlin 3. The ATP/GTP combined experiment and the clathrin releasing experiment were conducted to investigate the effect of mRSD-9 on endocytosis. RESULTS: Expressed Myc-mRSD-9 was precipitated by Flag-endophilin 3. Conversely, the expressed Flag-endophilin 3 was also precipitated by Myc-mRSD-9. Under laser scanning confocal microscope, mRSD-9-GFP fusion protein and endophilin 3-RFP fusion protein were observed to co-localize in CHO cells. The combination of mRSD-9 protein with ATP/GTP was found and was specific because no combination was detected using mutant ΔmRSD-9. In empty vector transfected group, the quantity of transferrin in red fluorescent expressed cells was roughly the same as the untransfected cells. In pDsRed1-N1-mRSD-9 transfected group, the quantity of transferrin in mRSD-9 protein expressed cells was obviously reduced. In pDsRed1-N1-ΔmRSD-9 transfected group, the quantity of transferrin in ΔmRSD-9 protein expressed cells was significantly increased. CONCLUSION: The protein coded by mRSD-9 gene can suppress endocytosis of transferrin.     

高贵化回交育种技术在凉蔗2号遗传亲系中的应用探讨

凉蔗2号亲系广泛应用高贵化杂交育种方法,引入异质血缘多次回交,打破连锁遗传,重组有利基因,促进血缘多样化,实现超亲。进行凉蔗2号亲系遗传高贵化杂交技术研究,有利于为凉蔗2号用作广亲和力亲本,实施远缘杂交制种工作提供有益借鉴。     

独立圆盘耙单体排列参数对秸秆堵塞影响研究

为对秸秆覆盖混埋还田耕整地技术模式进行深入研究,需要研发配套圆盘耙联合整地机具,机具研发过程中首先要解决受秸秆影响的堵塞问题。通过进行影响因素的单因素试验和3因素3水平正交试验,探索独立连接圆盘耙单体排列参数对秸秆堵塞问题的影响规律。通过单因素试验确定对应机具通过性评分为3分的三个因素临界值:耙片间距为275 mm,横梁间距为900 mm,错位间距取值全部满足试验要求。正交试验极差分析结果表明:耙片排列参数对机具堵塞影响主次顺序为耙片间距B,横梁间距L,错位间距S;机具通过性的较优组合为耙片间距325 mm,横梁间距1 100 mm,错位间距0 mm。正交试验方差分析结果表明机具排列参数耙片间距和横梁间距对机具堵塞影响显著,错位间距对机具堵塞影响不显著。正交试验回归分析结果得到拟合度较高的机具通过性回归方程:T=0.833B+0.667L。本文试验结果为圆盘耙联合整地机的开发与设计提供数据参考。     

Seismic behavior of reinforced-concrete and steel reinforced concrete ultra short columns

进行了4个钢筋混凝土(RC)超短柱、4个型钢混凝土(SRC)超短柱和6个RC分体柱的滞回性能试验研究.8个超短柱的剪跨比为1;6个分体柱的剪跨比为2.4.试验结果表明,RC超短柱的变形能力不满足现行抗震规范要求.不设剪力连接件的SRC超短柱的破坏模式为黏结破坏,与RC超短柱相比,其抗剪承载力和变形能力并无明显提高;设置剪力连接件的SRC超短柱的破坏模式为斜压破坏,其抗剪承载力和变形能力显著提高,但构件的变形能力仍然难以满足现行抗震规范要求.试验结果还表明,在RC超短柱中开缝,形成剪跨比大于2的RC分体柱,可有效提高柱子的延性和变形能力.对于RC分体柱,随轴压比的提高,构件的抗弯承载力提高,但延性和变形能力下降;当设计轴压比大于0.7时,RC分体柱的变形能力不满足现行抗震规范要求.根据试验结果,提出了SRC超短柱的剪力连接件设计方法和RC分体柱的设计建议.     

The value of incorporating carcass trait phenotypes in terminal sire selection indexes to improve carcass weight and quality of heavy lambs

Genetic selection for carcass traits is paramount to maximize the profitability and long‐term sustainability of any meat‐producing livestock species. The main objectives of this research were to evaluate the efficiency of indicator traits for the genetic improvement of lamb carcass traits and to determine the value of including carcass traits into terminal sire selection indexes for the Canadian sheep industry. The carcass traits included hot carcass weight (HCW), fat depth at the GR site (FATGR) and average carcass conformation score (AVGCONF), and were measured on heavy lambs (slaughter age less than 365 days and HCW greater than 16.3 kg) in commercial abattoirs. Growth traits were found to be moderately efficient indicator traits for the genetic improvement of HCW but selection on ultrasound traits was necessary to substantially improve the carcass quality traits (FATGR and AVGCONF). Economic selection indexes were designed by adding various combinations of carcass traits into the Canadian Sheep Genetic Evaluation System terminal indexes. Records measured on individuals and progeny were assumed to be the sources of information for live animal and carcass traits, respectively. The changes in index accuracy, efficiency and expected correlated response were used to assess the value of their inclusion. HCW was found to have a large economic value, and its inclusion into terminal selection indexes was expected to substantially increase their accuracy (0.08–0.12 points) and efficiency (20%–30%). However, further including FATGR (measured 110 mm from the carcass midline over the 12th rib) and AVGCONF had little impact on the accuracy (≤0.03) and efficiency (1%–7%) of the proposed indexes. Thus, the inclusion of carcass traits into the existing terminal selection indexes could be beneficial for the genetic improvement of HCW, but further research is needed to determine optimal methods of increasing carcass fatness and muscularity.