品种试验中最优参试品种个数和重复次数的确定

本文在下列两个准则下对品种试验中参试品种个数和每一参试品种的重复次数进行优化：（１）试验小区数固定为Ｎ的条件下使选择响应Ｒ最大化；（２）选择响应指定为Ｒ的条件下使试验小区数Ｎ最小化．     

泡桐新无性系苗期性状测定

对１２个泡桐无性系苗期性状测定分析表明，苗高、地径、叶面积和材积指数的遗传力分别为７３．５％、８６．２％、８３．４％和８０．４％；遗传变异系数分别为５．４３％、１１．３％、１２．２％和２６．２％。地径、叶面积和材积指数三个性状间的遗传相关、环境相关和表型相关显著。据此，确定以地径或材积指数作为苗期选择性状，初选出２个较优良的的无性系供中试验证。     

Priority setting in research for sustainable land use: the case of the Adja Plateau,Benin

TheProjet Recherche Appliquée en Milieu Réel is situated on the Adja Plateau, Southwest Benin. The project is responsible for a FSR&D programme that aims at sustainable use of the so-calledTerres de barre. Technologies tested in this context include seasonal fallowing, usingMucuna pruriens cv. group Utilis (weed control, green manure), planted fallows using fast-growing species such asAcacia auriculiformis and hedgerow intercropping systems (various woody auxiliary species). In this paper the local farming system is analyzed to identify key parameters that determine the possibilities for technology adoption. Parameters include: function and history of fields; tenureship; the field's position with regard to fertility flows in the farming system.The paper also aims at understanding the reasons behind low crop yields, in this case maize. An analysis of the soil's chemical fertility, using a computer-based fertility assessment model and data from literature, shows some anomalies with respect to the availability of nutrients from organic matter. Data presented on the use of green manures and oil palm fallow compared to cultivated fields make it likely that organic matter management is a crucial factor in sustainable use of these soils (maintenance of soil structure and soil life). Given key parameters, a matrix is used to determine potential niches in the farming system for the various biomass production technologies mentioned previously, including the locally developed planted fallow based on oil palm.     

Testing perennial ryegrass (Lolium perenne L.) as spaced plants in swards

Summary A method of testing spaced plants in swards of another grass crop is described. The procedure provides information on sward performance at each stage of the breeding scheme. A large number of entries may be included, together with whatever cutting frequency.When used for perennial ryegrass, the method favours the selection of productive and persistent plants.     

灌注根超声脉冲检测法和判据的研究

本文论述了钴孔灌注桩超声脉中检测法的原理、仪器和方法.分析了当超声脉冲穿过缺陷区时其传播时间、幅值(或衰减)以及接收信号波形所呈现的变化.提出了基于"声时—深度"曲线的缺陷定量判据.即声时差值与斜率乘积判据.该判据能估算缺陷的性质和大小.而且,若将该判据与"幅值—深度"曲线综合运用,则可提高检测和判断结果的精度.     

链锯模拟试验台微机检测部分的程序设计

本文介绍了T—2B型链锯模拟试验台中微机检测部分的硬件结构和程序设计。给出了微机检测部分的结构图,A/D转换器和微机的连接图,主程序框图和中断服务程序框图。重点介绍了链锯切削参数的采样程序,各切削参数工程值转换程序,数据处理以及“间竭”打印程序的设计方法和技巧。同时还给出一些主要的实用程序。     

Controle d'activite des vaccins antirabiques inactives. Problemes poses par l'utilisation du test de HabelPotency testing of veterinary vaccines containing inactivate virus. Difficulties raised by the use of Habel test

Le test de Habel utilisé dans le monde entier a rendu d'inestimables services. Il continuera à en rendre longtemps encore puisqu'il permet de caractériser de façon simple et rapide un très bon ou un très mauvais vaccin.

Grâce à une interprétation critique et raisonnée des résultats obtenus il est possible de distinguer des vaccins de valeur moyenne ou médiocre mais, dans ce cas, l'imprécision de ce test est grande, ce qui pose à l'expérimentateur des problèmes évidents.

En raison, d'une part de la nécessité d'utiliser un test aussi simple que le test de Habel, mais plus fiable, d'interprétation plus aisée et répondant mieux aux conditions d'utilisation des vaccins préventifs sur le terrain, et d'autre part, de la difficulté à généraliser actuellement tout au moins un test qui implique l'emploi d'un vaccin de référence, il nous semble possible et souhaitable de définir dès maintenant, en tenant compte des travaux antérieurs sur cette question, une technique qui réponde à ces impératifs.     

An in vitro biomechanical comparison of a limited-contact dynamic compression plate fixation with a dynamic compression plate fixation of osteotomized equine third metacarpal bones

OBJECTIVES: To compare the monotonic biomechanical properties and fatigue life of a broad, limited contact, dynamic compression plate (LC-DCP) fixation with a broad, dynamic compression plate (DCP) fixation to repair osteotomized equine 3rd metacarpal (MC3) bones. STUDY DESIGN: In vitro biomechanical testing of paired cadaveric equine MC3 with a mid-diaphyseal osteotomy, stabilized by 1 of 2 methods for fracture fixation. ANIMAL POPULATION: Twelve pairs of adult equine cadaveric MC3 bones. METHODS: Twelve pairs of equine MC3 were divided into 3 test groups (4 pairs each) for (1) 4-point bending single cycle to failure testing, (2) 4-point bending cyclic fatigue testing, and (3) torsional single cycle to failure testing. An LC-DCP (8-hole, 4.5 mm) was applied to the dorsal surface of 1 randomly selected bone from each pair. One DCP (8-hole, 4.5 mm broad) was applied dorsally to the contralateral bone from each pair. All plates and screws were applied using standard AO/ASIF techniques to MC3 bones that had mid-diaphyseal osteotomies. Mean test variable values for each method were compared using a paired t-test within each group. Significance was set at P<.05. RESULTS: The mean 4-point bending yield load, yield bending moment, composite rigidity, failure load, and failure bending moment of LC-DCP fixation were significantly greater (P<.01) than those of broad DCP fixation. Mean cycles to failure for 4-point bending was significantly (P<.001) greater for broad DCP fixation compared with broad LC-DCP fixation. Mean yield load, mean composite rigidity, and mean failure load in torsion was significantly (P<.02) greater for broad LC-DCP fixation compared with broad DCP fixation. CONCLUSION: Broad LC-DCP offers increased stability in static overload testing, however, it offers significantly less stability in cyclic fatigue testing. CLINICAL RELEVANCE: The clinical relevance of the cyclic fatigue data supports the conclusion that the broad DCP fixation is biomechanically superior to the broad LC-DCP fixation in osteotomized equine MC3 bones despite the results of the static overload testing.     

An in vitro evaluation of plate luting using osteotomized equine third metacarpal bones with a limited contact-dynamic compression plate

OBJECTIVES: To evaluate the effects of plate luting on the biomechanical properties of a broad limited contact-dynamic compression plate (LC-DCP) fixation to repair osteotomized equine 3rd metacarpal (MC3) bones. STUDY DESIGN: In vitro biomechanical testing of paired cadaveric equine MC3 with a mid-diaphyseal osteotomy, stabilized by LC-DCP fixation, with 1 of the pair luted with polymethylmethacrylate (PMMA). ANIMAL POPULATION: Ten pairs of adult equine cadaveric MC3 bones. METHODS: Ten pairs of equine MC3 were divided into 2 test groups (5 pairs each) for (1) palmarodorsal 4-point bending single cycle to failure testing and (2) palmarodorsal 4-point bending cyclic fatigue testing. The LC-DCP (8 hole, 4.5 mm) was applied to the dorsal surface of each pair of MC3 bones. All plates and screws were applied using standard AO/ASIF techniques. All MC3 bones had mid-diaphyseal osteotomies. One of the matched pairs of LC-DCP-MC3 constructs were randomly chosen to be luted with PMMA. Mean test variable values for each method were compared using a paired t-test within each group; significance was set at P<.05. RESULTS: Mean palmarodorsal 4-point bending yield bending moment, failure bending moment of the LC-DCP fixation with luting was not significantly different (P>.05) than those of the LC-DCP fixation without luting. Mean cycles to failure for palmarodorsal 4-point bending was significantly (P<.0003) greater, with a 7.2-fold increase, for the LC-DCP fixation with luting compared with the LC-DCP fixation without luting. CONCLUSION: Luting the broad LC-DCP with PMMA in the fixation osteotomized equine MC3 bones increases the fatigue life of cyclic loading for palmarodorsal 4-point bending under the in vitro conditions studied. CLINICAL RELEVANCE: The cyclic fatigue data supports the conclusion that luted broad LC-DCP fixation is biomechanically superior to the non-luted broad LC-DCP fixation in osteotomized equine MC3 bones.     

An in vitro biomechanical comparison of a prototype equine metacarpal dynamic compression plate fixation with double dynamic compression plate fixation of osteotomized equine third metacarpal bones

OBJECTIVES: To compare the monotonic biomechanical properties of a prototype equine third metacarpal dynamic compression plate (EM-DCP) fixation with a double broad dynamic compression plate (DCP) fixation to repair osteotomized equine third metacarpal (MC3) bones. STUDY DESIGN: In vitro biomechanical testing of paired cadaveric equine MC3 with a mid-diaphyseal osteotomy, stabilized by 1 of 2 methods for fracture fixation. POPULATION: Twelve pairs of adult equine cadaveric MC3 bones. METHODS: Twelve pairs of equine MC3 were divided into 3 test groups (4 pairs each) for (1) 4-point bending single cycle to failure testing, (2) 4-point bending cyclic fatigue testing, and (3) torsional testing. The EM-DCP (10-hole, 4.5 mm) was applied to the dorsal surface of one randomly selected bone from each pair. Two DCPs, 1 dorsally (10-hole, 4.5 mm broad) and 1 laterally (9-hole, 4.5 mm broad) were applied to the contralateral bone from each pair. All plates and screws were applied using standard AO/ASIF techniques to MC3 bones that had mid-diaphyseal osteotomies. Mean test variable values for each method were compared using a paired t-test within each group. Significance was set at P<.05. RESULTS: Mean 4-point bending yield load, yield bending moment, bending composite rigidity, failure load and failure bending moment of the EM-DCP fixation were significantly greater (P<.0001) than those of the double broad DCP fixation. Mean cycles to failure in 4-point bending of the EM-DCP fixation was significantly greater (P<.0008) than that of the double broad DCP fixation. Mean yield load, composite rigidity, and failure load in torsion of the EM-DCP fixation were significantly greater (P<.0035) than that of the double broad DCP fixation. CONCLUSION: The EM-DCP provides increased stability in both static overload testing and cyclic fatigue testing. CLINICAL RELEVANCE: Results of this in vitro study support the conclusion that the prototype EM-DCP fixation is biomechanically superior to the double broad DCP fixation for the stabilization of osteotomized equine MC3.