固相萃取-高效液相色谱串联质谱法测定油菜薹中反式维生素K1含量

为准确测定反式维生素K1的含量，建立了基于固相萃取-高效液相色谱串联质谱的甘蓝型油菜（Brassica napus L.）菜薹反式维生素K1高灵敏检测技术。样品经正己烷提取、中性氧化铝柱净化后，用C30反相色谱柱，以甲醇 （含0.025%甲酸+2.5 mmol/L甲酸铵）为流动相，采用选择反应监测（selected reaction monitoring, SRM）模式进行定量分析，20 min内可实现顺反异构体色谱分离。方法学考察结果显示，反式维生素K1在范围内线性关系良好，相关系数为0.9985。该方法检出限为0.29 μg/kg，定量限为0.95 μg/kg。回收率为87.5%～117.6%，精密度（RSD）在0.72% ～9.59%之间。利用该方法对油菜薹和反式维生素K1含量高的3种蔬菜进行分析，发现油菜薹中反式维生素K1含量为340.08 μg/100g，高于小白菜（B. rapa spp. chinensis，260.93 μg/100g）、西兰花（B. oleracea var. Italic Planch， 167.65 μg/100g）和结球甘蓝（B. oleracea var. capitata，151.11 μg/100g）。本文建立的蔬菜中反式维生素K1准确定量分析方法操作简单、灵敏度高、结果准确。同时比较发现油菜薹是一种富含维生素K1的蔬菜。      

高含固率木质纤维素厌氧发酵物总DNA的4种提取方法比较

不同的样本特性和提取方法对获得微生物总DNA的质量有重要影响。文章基于高含固率木质纤维素厌氧发酵物腐殖酸、酚类物质含量高、质地均一性差、微生物浓度低的特点,研究了4种方法提取不同高含固率粪秸厌氧发酵物中微生物总DNA的效果。结果表明,常规的十二烷基磺酸钠法(sodium dodecyl sulfate,SDS)、十二烷基磺酸钠和溴化十六烷基三甲铵结合法(sodium dodecyl sulfate and cetyltrimethyl ammonium bromide,SDS-CTAB)和商业的粪便试剂盒法提取的DNA质量均较差,SDS法和试剂盒法未能获得聚合酶链式反应(polymerase chain reaction,PCR)扩增目的条带,SDS-CTAB法得到的条带较模糊;改进SDS-CTAB法获得的DNA杂质少、纯度高,具有较好的稳定性,A260/A280和A260/A230值分别为1.74~1.86和1.65~1.86,每克样品的DNA浓度在50 ng·μL^-1以上,电泳条带单一齐整、清晰明亮,PCR扩增的目的条带清晰度高,适宜后续分子生物学技术的分析。林格氏液洗脱、聚乙烯吡咯烷酮-40(Polyvinyl Pyrrolidone-40,PVP-40)洗涤液除杂以及裂解液和多种酶联合破壁是改进SDS-CTAB法获得该类专一性样本高质量微生物总DNA的关键步骤。     

超高效液相色谱串联质谱法对水产品中硝基呋喃代谢物的测定

建立了使用Waters UPLC Xevo TQ超高效液相色谱串联质谱仪检测水产品中4种硝基呋喃代谢物的分析方法。匀浆后的样品在酸性环境下水解,并用2-硝基苯甲醛衍生16h,经磷酸氢二钾提取,LMS固相萃取小柱净化后,在三重四极杆多反应监测模式下进行测定。方法采用同位素内标法定量,四种代谢物的检出限(LOD)均低于0.25μg·kg-1,线性范围在0.5μg·L~(-1)到10μg·L~(-1)间,相关系数大于0.99。在0.5、1.0和5μg·kg-1浓度下分别进行添加回收试验(n=5),回收率在75.2%~123.3%之间,相对标准偏差(RSD)小于9.4%。     

分散固相萃取结合UPLC-Orbitrap MS联用测定鸡蛋中五氯苯酚残留量

建立了超高效液相色谱-静电轨道阱质谱联用测定禽蛋中五氯苯酚残留量的分析方法。取均质后的禽蛋样品经乙腈溶液提取,加入无水硫酸镁和氯化钠进行脱水和盐析,高速离心分层后,取适量乙腈层溶液经0.1%(V∶V)甲酸稀释后,用酸性氧化铝粉末进行样品净化并以10000 r/min离心取上清液,过0.22μm滤膜后上机测定。使用反相色谱柱进行分离,流动相为乙腈:0.1%甲酸=75∶25,采用等度程序进行洗脱,静电轨道阱质谱进行定性定量分析。结果表明,五氯苯酚在0.5~100μg/kg范围内线性关系良好(r>0.995),方法的最低检出限为0.2μg/kg,最低定量限为0.5μg/kg,添加回收率在74.43%~96.85%之间,批内批间变异系数CV%<10%。该方法具有较好的准确度与精密度,适用于禽蛋中五氯苯酚残留量的测定。     

Solid Model Design on the Features of Products

To research the problem of plastic art design and emulation of products with the virtual reality technology can short the product development cycle and reduce the cost. This paper discusses the information based on the product feature ,solid model with parameters, the structure and function of this system. Combined the product properties with its solid model. Proposed a method with CAD to create the model of the product based on features in the product design. Expressed its feature parameter and shape of model fully .In the case for a deceleration box the feature model has solved the problem of physical information ,geometry information and the informative process in its production management system efficiently.     

CALCULATION OF TNE END-EFFECT FACTOR OF SYNCHRONOUS MOTOR WITH CYLINDRICAL SOLID ROTOR

This paper presents the end-effect factor of Synchronous motor with cylindricalsolid rotor offered by analysing the 3-D electromagnetic field and using the Poynting vector.To ap-ply it in an actual calculation,the end-effect factor is proved correct and applicable.     

Utilizing Industry Solid Wastes as Resource of Building Material in Chongqing

To embed or heap industry solid wastes somewhere will occupy the earth and pollute the environment seriously. So utilizing the industry solid wastes as regeneration resource is important for sustainable development of city. Based on application and research for years in utilizing industry wastes and widely investigation, the produce status of industry solid wastes in Chongqing such as fly ash, desulfuration gypsum, blastfurnace slag and chromium slag are introduced. At the same time,this paper introduces application and research on these wastes in field of building material in Chongqing. Analyze problems and countermeasures during utilizing industry solid wastes as regeneration resource in Chongqing. As a further the prospect of utilizing industry solid wastes as regeneration resource of building material is discussed.     

Study on the Sedimentation Rule of the Particles in Debris Flow

In this paper, according to the study on a great number of experiments and data analyses, the sedimentation rule of solid particles in debris flow is set up. Three main factors that influence the particle sedimentation in debris flow were studied; the basic reasons to influence the particle sedimentation were analyzed. The particle sedimentation in debris flow could be divided into three stages,i, e. the starting stage, the quick sedimentation stage and the accumulation stage,and detailed analysis on the sedimentation process each stage was made. The liquid viscosity, particle quality and additional water pressure have an important role on the sedimentation rule of the particle in debris flow.