The Particle Properties of Panzhihua Vanadium-Bearing Titanomagnetite Concentrate

In order to investigate how to increase the concentrate sintering productivity,the particle properties of the concentrate have been studied. It was found that the essential reasons for low sintering productivity are the difficulties to pelletize and poor permeability because of particle' s size bigger,smooth surface, poor activity and hydrophobe.     

Study on Analysis Methods for Rock Slope FoundationStability of the Highrise Building

Based on the practical project a study on analysis methods for rock slope foundation stability of highrise-building project criterion transfer coefficient method, rotation limit equilibrium method (Sweden slices method) and finite element method was carried out.The authors found that safety factor of criterion transfer coefficient method is larger than that of rotation limit equilibrium method, but is similar to the results of finite element method. So, when rockslope foundation stability of highrise building is to be analysed,the rotation limit equilibrium method is suggested to use.     

基于小波变换和BP神经网络的水稻冠层重金属含量反演

自然农田生态系统中,农作物的各种生化参数受重金属污染胁迫后虽表现异常,但其特征往往极为微弱,极不稳定。利用处理非稳定信号方法中常用的信号处理方法——小波分析法(Db-5),对水稻的光谱反射率数据进行处理,有效提取光谱信号中受重金属污染胁迫而潜藏的一些"突变"弱信息。利用Db-5小波基进行小波变换,从中选取具有异常光谱特征的奇异点,利用奇异点对应波段(716、745、766 nm)的光谱反射率构建反向传播(BP)神经网络模型,对水稻冠层4种重金属含量进行反演。将利用模型得到的预测值与实测值进行相关性分析,结果表明,基于BP神经网络的水稻冠层重金属含量反演模型对于实验区镉、铅、汞、砷4种重金属胁迫,具有良好的反演效果。     

秸秆旋埋还田后空间分布效果仿真与试验

对传统旋耕机(TR)、秸秆旋埋还田机(SR)和深松+秸秆旋埋还田机(SSR)进行了秸秆还田离散元仿真和田间试验对比。通过设计的秸秆三维坐标测量装置对秸秆在土壤中的空间坐标进行了测量,并在三维绘图软件中还原了秸秆在土壤中的空间状态,及秸秆在三维图中量化及可视化显示。对取样立方体进行分层、横向及纵向划分等探究了秸秆在土壤中垂直分布及水平分布的均匀性。利用离散元软件建立了相应的仿真模型,并与田间试验设定了相同的作业参数,在仿真作业完成后,通过设置不同尺寸的Geometry Bin计算区域内秸秆数量,并分别对应实际田间作业的分层、横向和纵向划分。在分层处理中,仿真与实测结果表明,SR和SSR埋入土壤中的秸秆量都明显大于TR,尤其是埋入土壤下层的秸秆量均是TR的数倍。TR、SR和SSR作业后各层秸秆占比仿真值和实测值的变异系数均呈递减趋势,其中SSR的变异系数最小,分别为28. 8%和28. 7%。3种耕作装备下仿真值与实测值的变异系数相差不大,平均误差为9. 6%。横向和纵向划分中,TR、SR和SSR的各区域秸秆占比仿真值和实测值的变异系数无绝对规律,SSR的变异系数均最小。离散元仿真和田间试验结果表明,SSR秸秆还田后,秸秆在土壤中垂直分布和水平分布的均匀性均最优。离散元仿真较好地拟合了实际田间作业后秸秆的空间分布状态,相对误差在可接受范围内。     

Determination of growth-stage-specific crop coefficients (Kc) of cotton and wheat

Development of crop coefficient (Kc), the ratio of crop evapotranspiration (ETc) to reference evapotranspiration (ETo), can enhance ETc estimates in relation to specific crop phenological development. This research was conducted to determine growth-stage-specific Kc and crop water use for cotton (Gossypium hirsutum) and wheat (Triticum aestivum) at the Texas AgriLife Research field at Uvalde, TX, USA from 2005 to 2008. Weighing lysimeters were used to measure crop water use and local weather data were used to determine the reference evapotranspiration (ETo). Seven lysimeters, weighing about 14 Mg, consisted of undisturbed 1.5 m × 2.0 m × 2.2 m deep soil monoliths. Six lysimeters were located in the center of a 1-ha field beneath a linear-move sprinkler system equipped with low energy precision application (LEPA) and a seventh lysimeter was established to measure reference grass ETo. Crop water requirements, Kc determination, and comparison to existing FAO Kc values were determined over a 2-year period on cotton and a 3-year period on wheat. Seasonal total amounts of crop water use ranged from 689 to 830 mm for cotton and from 483 to 505 mm for wheat. The Kc values determined over the growing seasons varied from 0.2 to 1.5 for cotton and 0.1 to 1.7 for wheat. Some of the values corresponded and some did not correspond to those from FAO-56 and from the Texas High Plains and elsewhere in other states. We assume that the development of regionally based and growth-stage-specific Kc helps in irrigation management and provides precise water applications for this region.     

滑阀节流槽阀口的流量控制特性

提出以节流槽内节流面的串并联效应确定二节矩形节流槽阀口面积的原则,推导出阀口面积的计算公式并编制了阀口面积的计算程序;在此基础上对二节矩形节流槽的流量特性进行了试验,试验表明二节矩形节流槽阀口的流量系数是单节矩形槽阀口流量系数的组合,流量系数在阀口开度较小或接近全开时流量系数快速增大,在阀口开度中间区段流量系数较小,在二节节流槽的交界处流量系数增大,流出节流槽方向的流量系数比流入方向约大0.1;提出了反映节流槽阀口流量控制特性的参数阀口流量面积Aq,阀口流量面积为阀口面积和流量系数的耦合函数,与阀口面积及流量系数传统概念相比,阀口流量面积更加合理地表征了阀口几何面积和阀口形状对流量的控制作用.     

插入式地下滴水器的研制与水力性能试验分析

在对现有滴头、滴箭等产品结构改进与优化设计的基础上,研制开发出一种具有快速装拆、移动灵活、抗堵塞功能的插入式地下滴水器产品,通过产品的具体结构组成与工作原理分析,进行了其流量均匀性、压力-流量关系的试验研究,结果表明:插入式地下滴水器所需起始工作压力低,额定流量小,具有较稳定的水力性能,适合用于对缺水区非密植作物的补充性抗旱灌溉,起到提高设备利用率、有效降低灌溉系统投资的作用,且能成功地把地表滴灌转化为地下滴灌的应用模式.     

不同水肥模式的水稻叶面积修正系数试验研究

叶面积修正系数直接决定着长宽修正系数法测量叶面积的精确程度.为探讨水肥模式对水稻叶面积修正系数的影响,基于水稻实测叶面积及叶片长、宽数据计算叶面积修正系数,并分析其变化规律.结果表明,各处理生育前期水稻叶面积修正系数接近或超过经验值0.75,中期较小,抽穗开花期略有上升并稳定至0.7左右.常规灌溉处理上层叶片叶面积修正系数较控制灌溉大,叶片更加细长.不同肥料处理中,控释肥处理叶面积修正系数普遍偏低;常规肥及实地肥处理在生育前期可以采用经验值进行叶面积计算;抽穗开花及以后各生育期,各处理均可采用相同的叶面积修正系数;生育中期各处理叶面积修正系数较低.     

木薯粉对罗非鱼生长、饲料利用和鱼体营养成分的影响

选择健康的吉富罗非鱼(体重1.29±0.25 g)为实验鱼,配制五种木薯粉含量分别为0%、10%、20%、30%和40%的等氮(粗蛋白为32%)、等能(总能为16 kJ·g-1)实验饲料,饲喂罗非鱼56 d,每饲料组设三个重复,研究不同含量木薯粉对吉富罗非鱼生长、饲料利用及全鱼营养成分的影响.结果表明:(1)木薯粉能提高罗非鱼的增重和蛋白质效率,其中以40%木薯粉组的效果最佳,其增重率、蛋白质效率和饲料系数分别为1470.99%(P＜0.05)、2.36(P＜0.05)和1.27(P＜0.05).(2)40%木薯粉组的干物质和蛋白质的表观消化率分别较对照组提高13.87%(P＜0.05)和7.93%(P＜0.05).(3)40%木薯粉组的全鱼粗蛋白、粗灰分分别较对照组显著提高7.07%(P＜0.05)和8.78%(P＜0.05),粗脂肪降低了13.00%(P＜0.05).     

A rapid extensigraph protocol for measuring dough viscoelasticity and mixing requirement

The extensigraph is particularly useful in characterizing dough viscoelastic properties; however, testing throughput for standard method is low due to the prerequisite for farinograph water absorption, long dough resting and milling to prepare large amounts of flour. Therefore, a rapid extensigraph method was developed that reduced sample size (165 g wheat) for milling and more than tripled throughput. Wheat is milled in Quadrumat Junior mill with a modified sieving system. The resulting flour (100 g) was mixed with a pin mixer at constant water absorption to allow the evaluation of wheat genotypes at the absorption level they are expected to perform. Dough was subsequently stretched by an extensigraph after 15 min of floor time and 30 min resting. Strong correlations for extensigram R_max (r > 0.93), extensibility (r > 0.64) and area (r > 0.88) were found for the proposed method compared to the standard method. Mixing parameters (time and energy) obtained during dough preparation provided further information about dough strength and mixing requirement. By significantly reducing sample size requirement and increasing testing throughput, this rapid extensigraph method can be widely adopted in milling and baking industry and meets the need for a fast evaluation of dough strength in breeding trials.