“层流型”分草曲面用于覆盖免耕播种机的研究

运用流体力学基本原理对分草曲面的工作流场、秸秆覆盖层的连续介质属性，以及曲面用于分草、防堵的机理进行了研究。采用“环槽试验方法”测定秸秆层的“相当粘度”，将分草曲面视为绕流物体，提出“层流型”曲面分草器最具良好的绕流性能，宜用作覆盖免耕播种机的防堵装置。本文并对５种流线的流速变化特征及其绕流特性进行了分析研究，提出抛物线与双曲线最宜用作分草曲面的流线。     

农业机械中型面无键联接技术

论述了型面无键联接的含义及型面联接的DG(等距)型廓形曲线，探讨了型面无键联接曲线的方程；并介绍了型面无键联接在喷粉喷雾机、收割机、拖拉机和摘棉机等农业机械中的应用，提出了在机械传动中实现无键联接的途径。     

4125A4发动机节能活塞的研制

发动机中,将燃料的化学能转换为机械动力能的主要零件是活塞。其结构、质量和性能,将决定能量转换的效率,直接影响发动机的动力性和经济性。为此,对现有4125A4发动机的动力性和经济性进行了分析,提出了节能活塞的设计方案,并进行了台架试验和田间试验。试验结果表明,其动力性能得到了改善,节油效果明显。     

Using drainage systems for supplementary irrigation

The use of drainage systems for supplementary irrigation is widespread in The Netherlands. One of the operating policies is to raise the surface water level during the growing season in order to reduce drainage (water conservation) or to create subsurface irrigation. This type of operation is based on practical experience, which can be far from optimal.To obtain better founded operational water management rules a total soil water/surface water model was built. In a case study the effects of using the drainage system in a dual-purpose manner on the arable crop production were simulated with the model. Also, the operational rules for managing this type of dual-purpose drainage systems were derived.The average annual simulated increase in crop transpiration due to water conservation and water supply for subsurface irrigation are 6.0 and 5.4 mm.y^–1, respectively. This is equivalent with 520 × 10³ and 460 × 10³ Dfl.y^–1 for the pilot region (2 Dfl 1 US $). The corresponding investments and operational costs are 600 × 10³ Dfl and 9 × 10³ Dfl.y^–1 for water conservation and 3200 × 10³ Dfl and 128 × 10³ Dfl.y^–1 for subsurface irrigation. Hence, water conservation is economically very profitable, whereas subsurface irrigation is less attractive.Comparing the management according to the model with current practice in a water-board during 1983 and 1986 learned that benefits can increase with some 50 and 500 Dfl per ha per year, respectively.     

Infiltration in surface irrigated swelling soils

Infiltration characteristics for border strip irrigation at two sites with swelling clay soils were examined. Volume infiltrated was calculated from flow onto the field monitored with flow meters; depth of water in the soil estimated from soil samples taken before and after irrigation; and the advance profile which was used to calculate the volume infiltrated with time. Volume infiltrated was compared with volume of cracks before irrigation.Linear advance and observed crack closing supported the hypothesis that infiltration approached zero after about 10 min. Volume of cracks was less than 20% of the volume infiltrated. Wetting front was 3–10 times greater than depth of observed surface cracks. There was no significant correlation between intake opportunity time and depth of infiltration, but elevation irregularities were related to infiltration.     

我国收入分配不合理现状的成因分析与对策思考

在今年“两会”上通过的“十一五”规划纲要中明确提出:“加快推进收入分配制度改革”和“更加注重社会公平”。表述中增加了“加快”和“更加”加以强调,于是,改革收入分配制度的紧迫性和重要性凸显出来。本论文就目前我国收入分配的基本现状以及产生收入分配不合理的成因展开论述,并就如何改善我国收入分配不合理的现状提出相应对策。     

玉米芯挥发特性的实验研究

为了更好地控制玉米芯汽化器的产气质量，有必要研究玉米芯的挥发特性。通过实验，研究了玉米芯的挥发份析出过程和特性，提出了在高温下玉米芯的挥发过程满足Ａｒｒｈｅｎｉｕｓ定律的假定，并由实验证是可行的，并且得出了相应的热化学动力学参考。     

2.25Cr-1Mo与铁铝合金高温抗氧化性能的对比研究

对2．25Cr-10钢与铁铝合金的高温抗氧化性能进行了对比研究。铁铝合金具有许多性能上的优点，尤其在其高温抗氧化性能方面。明显优于不锈钢、铬钼钢等传统的高温结构材料，并且随着温度的升高及铝含量的增加，其优势更加显著。     

旋耕刀曲面典型形状的研究

给出了描述旋耕刀曲面形状特征的３个角度参数：滑切角、起土角及偏切角，对比研究了日本典型旋耕刀ＦＴ８０３及Ｙ１５１和我国国家标准旋耕刀ⅡＴ２４５的这３个角度参数值，指出了旋耕刀曲面形状对其耕作性能和功耗的影响。     

知识产权对接中小企业模式研究

知识产权是企业核心竞争力的重要来源,特别是中小企业发展壮大的有效手段,因此中小企业亟须提升知识产权创造、运用、保护和管理能力.实施中小企业对接知识产权模式的有效途径是:企业进一步提高对知识产权的认识与自主创新能力,加快知识产权人才培养;同时政府要在知识产权交易、服务、运用和产权保护等方面发挥主导作用.