轻钢结构抗震节能体系在“塞上农民新居”中的应用

针对宁夏地区农民传统住宅抗震性差，建筑外围护结构保温性能差，采暖系统能源消耗量大，环境污染严重等问题，提出采用轻钢结构配以轻质保温板材的轻钢结构抗震节能体系，以期为宁夏农村住宅设计提供指导性建议。     

冷冲高硬度材料模具失效的原因与对策研究

在日常的应用中,我们发现,制作材料是高合金钢的模具要比硬质合金制作的模具耐用,我们进而研究了其失效的方式以及失效的比例,研究结果显示,硬质合金的失效主要体现在掉渣和崩刃,而高合金钢的失效主要体现在正常的磨损方面。在制作的过程中,高合金钢会由于在加热的不适当而使得碳化物不均匀,或者使得硬度不稳定等原因而没有充分发挥材料的潜在能力,文章对如何提高高合金钢的寿命提出了具体方案。     

广州地铁刚性接触网槽钢底座爆裂原因及应对措施

在日常检修过程中,检修人员多次发现广州地铁2号线新线部分刚性接触网槽钢底座出现爆裂.通过对列车运行过程中受电弓与汇流排的相互作用力进行分析,根据分析找出导致该问题的主要原因是槽钢底座受到的作用力过大及制作材料存在缺陷,并给出了避免或减缓该问题出现的相关应对措施,以确保地铁供电设备安全.     

Seismic behavior of reinforced-concrete and steel reinforced concrete ultra short columns

进行了4个钢筋混凝土(RC)超短柱、4个型钢混凝土(SRC)超短柱和6个RC分体柱的滞回性能试验研究.8个超短柱的剪跨比为1;6个分体柱的剪跨比为2.4.试验结果表明,RC超短柱的变形能力不满足现行抗震规范要求.不设剪力连接件的SRC超短柱的破坏模式为黏结破坏,与RC超短柱相比,其抗剪承载力和变形能力并无明显提高;设置剪力连接件的SRC超短柱的破坏模式为斜压破坏,其抗剪承载力和变形能力显著提高,但构件的变形能力仍然难以满足现行抗震规范要求.试验结果还表明,在RC超短柱中开缝,形成剪跨比大于2的RC分体柱,可有效提高柱子的延性和变形能力.对于RC分体柱,随轴压比的提高,构件的抗弯承载力提高,但延性和变形能力下降;当设计轴压比大于0.7时,RC分体柱的变形能力不满足现行抗震规范要求.根据试验结果,提出了SRC超短柱的剪力连接件设计方法和RC分体柱的设计建议.     

自动板栗脱壳机的设计

针对目前板栗脱壳过程中主要依靠手工剥壳,手指极易被板栗刺壳上坚硬的刺刺伤,以及劳动强度大、生产效率低的问题,设计了一种新型的自动板栗脱壳机。该机采用胶皮与螺纹钢揉挤的方式将板栗刺与板栗米分开,同时采用鼓风机搭配输送带的方式进行分离。实际测试结果表明,该机采用的脱壳方式和分离方式新颖,能最大限度地将板栗米与板栗刺剥离,且能实现两者的自动分离,对于减轻栗农劳动强度,缩短栗子从采摘到上市的时间发挥了极大作用,值得进一步推广普及。     

外包钢加固法的安全性防范措施研究

采用外包角钢加固的钢筋混凝土柱,其加固效果和安全性与诸多因素,如加固设计、加固施工工艺、加固端锚固构造、加固角钢的增钢率与增箍率、原柱所处的应力状态、使用过程中的维护管理等有关。对外包钢加固钢筋混凝土柱过程中影响其加固效果和安全性的诸多因素的安全性防范措施进行了初步的分析研究和探讨。     

Phase Transformation Diffusion Bonding of Titanium Alloy to Stainless Steel

Jointing of titanium alloy and stainless steel is very often in the fields like aviation, chemical plants etc. The combination of materials has the advantages of both titanium alloy and stainless steel and will reduce the consumption of titanium resource. The phase transformation diffusion bonding of TA17 titanium alloy to 0CriSNigTi stainless steel are carried out on Gleeble - 1500D. The effcet of maximum thermal cycle temperature, the tensile strength, the fracture surface and microstruture of the joints are investigated. The results show that TiFe and TiFe2 intermetallics and some solid solutions are formed along the interface, when maximum thermal cycle temperature increase, the area proportion of intermetallics in the fracture surface increase, which are detrimental to the mechanical properties of the transition joints.     

RECREATING SMALL SEAMLESS TUBE MILLS BY PIERCING INSFEAD OF ROLLING

This paper discuss the effects of automatic plug mills in small seamless tube mills. Far from traditional ideas,the auther comes rp with mew ideas, which adot the mew process of replacing rolling by piercing,a huge sum of economical interests and great social benefits will be gained.     

Experimental Research on High-strength Inorganic Anchoring Material

A new type of inorganic anchoring material is developed as a substitution for anchoring adhesive to overcome some imperfections in the process of planting reinforcing steel bar.The mix proportion of the anchoring material is determined by experiments.The compressive strength,adhesive force to concrete,volume stability and anchoring force with steel bar are studied.The early strength of the anchoring inorganic material is quite high: for 1d up to 38.5MPa and 3d up to 60MPa.It is a good adhesive to concrete and the adhesive strength of 28d is about 2MPa.The anchoring material will have tiny volume expansion with the age,which is beneficial to enhancing the anchoring force.The essential component of the inorganic anchoring material is cement-based material,so some defects of the organic macromolecular material can be avoided,such as poor stability and requirement for vigorous construction conditions.Its characteristics in early strength,adhesive force to concrete and volume expansion can satisfy the requirement of the construction to the planting reinforcing steel bar and the loading force,thus it can be used as a substituting material for anchoring adhesive.