Analysis and FEM Simulation of the Forming Process of Front Bumper Bracket

The processing characteristics of the front bumper bracket are analyzed,and a reasonable process scheme is worked out.The three-dimensional sheet metal forming analysis software PAM-STAMP are adopted to simulate the bracket's drawing process.Then the surface of die is proved fine through analyzing the FLD diagrams and the forming results.An economical and optimized die structure is decided,and a complete set of dies of the bracket is designed.The spacing block is added in the sizing mold,which control the size precision of end products and assembling columns actively,and finally the certified products.The material utility and the labor productivity are raised,the production cost is saved,and the mold design quality and the efficiency are improved effectively.     

Two Types Modules for the Boiler Attached to 330 MW Unit

Boiler is an important facility in power plant , the safety and economy of unit is affected by it. Studying the dynamic of boiler can improve the knowledge about boiler , which is important for. Features of MMS are introduced based on MMS simulation setting, and the real time capable module and non real time capable module are compared from principle. Real time capable dynamic model of boiler and non real time capable dynamic model of boiler of 330 MW unit are established . The experimental results show that the dynamic process of two type model accords with the mechanism of the object , at the same time, the validity of real time capable module is discussed .     

Simulation for Logistics in Steel-making Process of Panzhihua Iron and Steel Corporation

To solve potential scheduling problems in production after renewal of continuous casting process in Vanadium-extracting and Steel-making Plant of Panzhihua Iron and Steel Corporation (PISCO), how to model and simulate logistics system in steel-making processhas been discussed. A series of simulatingtests for logistics system in steel-making processhave been conducted based on inputs of presentsteel-making processof PISCO. In the tests, cases of regular schedule case and cases with repairing converter have also been regarded as essential simulation condition. It has been shown that three casters can not start at same time in order to ensure continuous hot metal supply for casters when three kinds of steel are made. It has also been shown that the simulation system for logistics system in steel-making processis valid and can be used for simulating logisticsin upcoming 100% continuous casting process of PISCO. The better schedule scheme of production and reasonable match of converter-caster in time and capacity can be achieved with the help of using simulation approach.     

Micromodel of Computer Emulational Simulation on Twin-roll Casting Strip Solidification Structure

Based on the research on the solidifiation of twin-roll casting strip,the analytical model and emulational model of nucleation,the growth of dendrity tip and colunar dendrity transformation to equiaxis dendrity (CET)of twin-roll casting strip solidification are established by means of the principle of metal solidification and modern computer emulational technology.The foundation for the emulational simulation of twin-roll casting strip solidification structure is laid.     

The Staged Simulation Method for Power Electronics Circuits

This paper in troduces a staged simulation method fur power electronics circuits,presents an exampleued the method for the CSI/IM drive system.     

Physical simulation of fluid field and structure optimization in two-strand tundish

The influence of the structure and location of dam and weir on fluid flow state in a two-strand tundish is studied, and a set of optimal structure, combining with the average residence time calculated from RTD curve, is obtained. The result indicates that the fluid flow state can be changed and the path of the fluid flow can be prolonged as well as the average residence time is improved after using dam and weir. But there are some dead zones after fluid passed through the dam and weir. Combination scheme of No. one dam and weir is better than the others. Its average residence time is 299 s and the volume fraction of dead zone is 31.0%. After the optimization of flowing control parameters in tundish, the best case is that the distance between dam and weir is 290 mm and the distance between weir and the long nozzle is 383 mm. The longest average residence time is 351 s and the minimum volume fraction of dead zone is 19.0% under the above situation. Compared with that of no dam and weir, the average residence time increases by 65 s and the dead zone volume fraction decreases by 15.0%. Based on Newton formula, the calculated results show that the inclusions with diameter larger than 17.5 μm can float up within 351 s under this optimization situation.     

不同熔化速率下的电渣重熔过程数值模拟分析

电渣重熔能提高钢锭的质量,从而满足特种行业的需要,其过程伴随着复杂的物理现象,存在着磁流体流动、传热和传质以及电化学等多方面的影响。通过耦合电磁以及流动和温度方程对电渣重熔过程的三维瞬态进行了数学模拟,研究了熔化速率对重熔过程的影响。结果表明：电流密度、焦耳热和电磁力都随着熔化速率的增大而增大,当熔化速率由14.4 kg/h增加到27.0kg/h,电流密度、焦耳热和电磁力最大值的增大比例超过100%。随着熔化速率的增大,温度最大值有小幅的增加,而且速度最大值的增大幅度接近50%;金属熔池深度则由27 mm增大到38 mm,不利于保证铸坯的质量。     

Human Simulated Intelligence Motion Control for Three-link Acrobot on Horizontal Bar

The design of multi-controller and multi-mode control law is presented for the three-link Acrobot on horizontal bar by employing Human simulated intelligent control method based on sensory-motor Schema.Imitated the characteristics of gymnast's swing-up and handstand movement,the control process of robot is divided by six sequence phase.Then the sensory cell and motor cell and the group of sensory-motor schema is designed based on the analysis of quality-quantity combination.The simulation results show that the controller ensures the gesture and the energy to the desired goal,farther more the motion control of giant swing backword is realized in the simulation.     

Control Strategy and Simulation Study on NiMH Battery Quick Charging for Regenerative Braking of HEV

Based on the result of NiMH battery performance experiments, changing trend of maximal temperature and difference in temperature of HEV NiMH battery in different SOC and different charging current is analyzed. Considering the working situation of HEV NiMH battery and the theory of battery quick charging, a control strategy for NiMH battery quick charging is described which adapts to HEV regenerative braking system based on Mascc law. By Modeling and simulating the process of NiMH battery quick charging with this strategy, constant voltage charge method and constant current charge method, validates this control strategy.     

Parameter Simulation on the Control Strategy for a Parallel Hybrid Electric Vehicle by CRUISE

The purpose of a parallel hybrid electric vehicle(PHEV) is for the best energy distribution between internal-combustion engine(ICE) and electric motor though the appropriate control strategy.It can not only keep the advantage of the ultra-low emission of electric vehicles(EV),but also take advantages of the hyperbaric energy of ICE.Simulation model for PHEV is built based on CRUISE,an auxiliary control strategy is designed,and then parameter simulation study on the control strategy is performed.The simulation results show that according to the different control requirements,the vehicle performance can be improved by adjusting!the corresponding control parameters.