顶空固相微萃取气相色谱质谱嗅觉测量联用初探鲢肉的挥发性风味物质

为探明鲢肉挥发性气味特征物质,通过顶空固相微萃取法提取和浓缩了鲢肉中的挥发性物质,并利用气相色谱质谱联用以及气相色谱〖CD*7/9〗嗅觉测量法对气味物质进行了定性分析及气味特征的评价。由8人组成的评价小组通过检测频率法进行嗅觉测量。结果表明,经GCMS分析鉴定得到了29种挥发性气味物质,主要是一些羰基类和醇类化合物,占了总挥发性物质的88%。通过检测频率分析法鉴定出12种化合物具有气味特征,表现为鱼腥、金属、青草、油脂氧化、蘑菇等特征。另外有4种未知物也显示了较强的风味特性,它们协同作用构成了鲢的特殊气味。     

气相色谱-嗅觉测量法鉴定蒌蒿中的香气化合物

 采用顶空固相微萃取法提取了蒌蒿样品中的挥发性成分, 利用气相色谱-嗅觉测量法(GC-O)并结合气相色谱质谱联用分析(GC - MS) , 鉴定了萎蒿中的香气化合物。共检出21个呈香化合物, 基于其嗅感强度, 反式- 2 - 己烯醛、水芹烯、顺式- 罗勒烯、3 - 崖柏酮、樟脑, 黄瓜醛、( - ) - 龙脑和( - ) - 乙酸龙脑酯被认定为形成蒌蒿香气的重要化合物。     

混合沙粒对半开式叶轮离心泵磨损的影响

为了研究含有混合多种颗粒粒径的含沙水对离心泵过流部件磨损特性的影响,应用RN G k-ε湍流模型和SIMPLEC算法,基于颗粒离散相模型(DPM)和半经验的McLaury磨损模型,沙粒注入选用Rosin-Rammler分布的拟合方法,对1台半开式离心泵内固液两相流的磨损特性进行数值分析.研究结果表明:叶轮流道内沙粒组分...     

萍乡显性核不育水稻临界温度值及其温度敏感期的研究

利用人工气候箱研究了萍乡显性核不育水稻临界温度值及其温度敏感期。试验结果表明高温诱导萍乡显性核不育水稻纯合不育株和杂合不育株育性转换的临界值均为27℃～ 28℃, 说明高温诱导萍乡显性核不育水稻育性转换不存在显性不育基因的剂量效应; 萍乡显性核不育水稻育性转换温度敏感期在花粉母细胞形成期至减数分裂期, 即抽穗前18～ 12 d;同时, 讨论了该不育材料的实际应用问题。     

Intrapancreatic accessory spleen mimicking pancreatic insulinoma with intrapancreatic metastasis in a cat

An 11-year-old neutered male Domestic Shorthair cat presented with a 3-month history of hypoglycemia, two episodes of seizure, and intermittent tick-like signs. Serum biochemistry revealed severe hypoglycemia associated with high insulin concentrations. Dynamic abdominal computed tomography (CT) indicated two pancreatic masses, which were enhanced most during the late arterial phase but had different degrees and variations of attenuation. Partial pancreatectomy was performed. Histopathology and immunohistochemistry confirmed that one mass was an insulinoma and the other was an ectopic splenic tissue, consistent with the differences in imaging findings. When an intrapancreatic lesion with hyper-attenuation on dynamic abdominal CT is detected, not only insulinoma or metastasis of malignancies but also intrapancreatic accessory spleen (IPAS) should be considered as differential diagnoses.     

4LZ-0.8型水稻联合收割机清选装置气固两相分离作业机理

为解决小型水稻联合收割机脱净率和损失率问题,提高脱粒清选质量,利用两相流动力学理论,分析了4LZ-0.8型水稻联合收割机脱粒清选分流筒中气流和杂物颗粒两相流动的规律。建立了杂物颗粒流的运动微分方程,导出了分离筒中杂物漂浮速度计算的一种方法,通过比较不同粒径、密度的物料的悬浮速度,得到了杂物颗粒最高速度与气流速度之比随气流速度变化的关系曲线,气流和杂物在分流筒及吸风管中运动时的压力损失随气流速度变化呈现先降后升的规律,压力损失中以加速损失和摩擦损失为主,各约占30%和26%。压力损失曲线存在最小值,此时的气流速度定义为经济气流速度。在喂入量为0.8 kg/s,谷草比为3:1脱粒条件下的经济的清选气流速度9.2 m/s,压力损失为630 Pa。该研究为4LZ-0.8型水稻联合收割机脱粒清选部件的参数优化设计及风机的选择提供了理论依据。     

Quantitative studies on the relationship between plowing into soil of clubbed roots of preceding crops caused by Plasmodiophora brassicae and disease severity in succeeding crops

The effect of the plowing of clubbed roots of cracifers on the population of Plasmodiophora brassicae in soil was quantitatively studied by measuring the number of resting spores produced in the diseased plants. Though the mean number of resting spores per diseased plant increased with the increase of the disease severity, it remained almost identical for the disease severity classified into category 3 among host species and cultivars tested. Mean number of resting spores per diseased plant ranged from 9.3 to 10.9 (log) regardless of the value of the disease index. When the number of resting spores in soil was calculated based on these data and plant cultivation methods, the values were equivalent to 4.8-6.4 resting spores g^-1soil (log)where clubroot disease occurred severely. The value of the disease index of Chinese cabbage plants grown in the pots where clubbed roots of initially grown plants had been plowed into soil (plowing plot) was higher than that in the pots where no plants had been grown (control plot) and where the clubbed roots of initial plants had been removed (removal plot). Though the number of resting spores of P. brassicae in soil decreased by 14% of the inocoKum concentration immediately after the inoculation, the number of spores after the first cultivation in the removal plot was similar to that in the control plot. On the other hand, the number of resting spores in the plowing plot increased significantly compared with that in the control plot. The plowing of clubbed roots into soil resulted in the increase of the population of P. brassicae and disease severity of clubroot in subsequent cultivation in the field. The results corresponded to the values estimated based on the number of resting spores in soil in relation to each value of the disease index.     

驱导辅助充种气吸式精量排种器设计与试验

针对现有气吸式排种器充种环节工作压力要求高、高速作业时充种性能不佳,导致排种质量下降的问题,采用主动驱导种群、减少局部种间接触的方法,提高排种器高速条件下的充种率,并基于此设计了一种驱导辅助充种气吸式精量排种器。分析了排种器充种过程中种子的受力状态,阐述了排种盘导种槽辅助充种的工作原理,以及在充种过程各阶段提高种子充填率的设计思路;对导种槽外形曲线方程、斜面倾角进行了理论计算,确定了曲线的基本参数;利用气固耦合数值分析方法 CFD-DEM,以型孔处局部空隙率为指标,进行了单因素仿真试验,确定了导种槽曲线方程的基圆半径最优值。为了验证设计结果,在工作压力-5、-6 kPa条件下,分别与其他2种气吸式排种器进行速度单因素对比试验,试验结果表明,所设计的排种器在高速条件下的漏充率优于其他排种器。对所设计的排种器进行了前进速度、工作压力的双因素试验,通过多目标优化方法,确定了排种器的最佳工作参数。将所设计的排种器安装在气力式玉米免耕播种机上,在3个工作速度下进行了单因素田间试验,结果表明,当作业速度为9. 11 km/h时,粒距合格指数为95. 48%,高速条件下充种性能较为稳定。     

旋流泵菜籽-水两相流浓度特性实验与流场数值模拟

为探索旋流泵固液两相流内部流场及变浓度输送特性,分析了旋流泵固液两相流动基本原理及其特点。在32WB8-12型样机上完成输送清水及菜籽体积分数CV分别为6%、10%的外特性实验,得出泵流量-扬程、流量-轴功率、流量-效率和流量-临界汽蚀余量性能曲线。采用Mixture多相流模型及RNG k-ε湍流模型,对旋流泵在清水最优工况流量qv=9. 31 m~3/h下输送菜籽固液两相流流场进行了数值模拟,求解采用SIMPLE算法,得到3个轴面静压、速度矢量和固粒体积分数分布图。通过对比分析,数值模拟准确性得到了验证。综合分析了泵外特性变化与内部流场之间的定性因果关系,并提出了两相流泵优化设计改进措施。     

Analysis on the Effect of Moisture Migration through Walls on Heat Transfer

A dynamic mathematical model for simulating the coupled heat and moisture transfer through walls was proposed with variable material properties. Relative humidity and temperature were chosen as the driving potentials. The temperature and relative humidity and heat flux of wall surface were calculated under varying boundary conditions and compared with those without taking moisture transfer into account. The results show that without and with absorption and desorption processes, the wall interior surface temperature amplitude of the former case is lager than that of the latter, and the average difference temperature of two cases is 0.9℃. The phase change latent heat caused by absorption and desorption of wall surface takes up 27.5% of the total heat transfer quantity, which cant be neglected.