构造柱施工质量的几项控制措施的一点体会

本文作者介绍了构造柱的设置、施工程序等 ,并且对其施工质量常出现的问题提出了几项控制措施。     

树干涂毒环防治下树转移沙棘木蠹蛾幼虫研究

观察研究沙棘木蠹蛾当年生幼虫的下树转移危害习性,利用该习性采取在树干上涂毒环、绑毒绳的方法控制该虫。观察发现,2005年9月1日到18日,幼虫绝大多数是在09：00-16：00间下树转移,极少数是在20：00-08：00下树;2005年9月18日以后未曾在早上和夜晚观察到下树幼虫,幼虫都是在10：00-16：00间下树。幼虫从排粪处爬出,顺着树干向下爬,到地面时继续沿着树干钻入土层,最后找到适宜的场所,停留在树根部的树皮裂缝处。用中西杀灭菊酯与金天敌长效缓释剂按1：9的比例混合配成毒剂涂干,环宽5cm,施药第5天对沙棘木蠹蛾幼虫的防治效果为100％,第30天防治效果在80％以上。     

Tangential and radial shrinkage variation within trees in sugi (<Emphasis Type="Italic">Cryptomeria japonica</Emphasis>) cultivars

The transverse shrinkage variation within trees was examined for five sugi cultivars. The within-tree trends of tangential shrinkage (α _T) were different by cultivar, whereas radial shrinkage (α _R) increased from pith to bark in most cultivars. The tangential/radial shrinkage ratio (α _T/α _R) decreased from pith to bark in most cultivars, because the radial variation of α _R was larger than that of α _T. The cultivars showed significant differences among cultivars in α _T, α _R, and α _T/α _R, but the difference among cultivars for α _T/α _R was smaller. The relationships between transverse shrinkage and microfi bril angle (MFA), basic density (BD), tree ring parameters, and modulus of elasticity were examined. The α _T and α _R showed positive relationships with BD, latewood percentage, latewood density, and modulus of elasticity, and negative relationships with MFA and ring width. The relationships with earlywood density were weak. Sugi exhibited variation in transverse shrinkage within stem and among cultivars, with the variation affected by MFA, density, and tree ring parameters. Part of this article was presented at the 56th Annual Meeting of the Japan Wood Research Society, Akita, Japan, August 2006, and the 57th Annual Meeting of the Japan Wood Research Society, Hiroshima, Japan, August 2007     

我国南方湿地松木材物理力学性质变异初探

我国南方五省区湿地松木材的密度、晚材率和各项力学强度,随纬度的增加,呈递减状态。纬度与气干容重之间的直线回归方程为:G=1.28—0.027L,相关系数r=0.984.产生此现象的主要原因是,木材的管胞宽度和厚度随着纬度的增加逐渐变窄、变薄。产地的年平均气温和年降水量对湿地松树木的年轮宽度和晚材带宽度影响较大;年轮和晚材带的平均宽度随产地自北向南依次增加,随着山地海拔的升高而减小。     

Influence of growth ring angle,adhesive system and viscosity on the shear strength of adhesive bonds

Abstract

To investigate the influence of growth ring angle, adhesive system and viscosity on the bonding properties of adhesive bonds, shear tension tests according to DIN EN 302-1 (2004) were conducted using one-component moisture-curing polyurethane, polyvinylacetate and urea-formaldehyde. Significant differences between the systems could be detected, which were reflected in the predominant failure behaviour for each system. Specimens showing wood failure were influenced mainly by the wood factors, whereas samples which had failed in the adhesive part of the bond differed only in the adhesive properties. The growth ring angle showed the same tendencies as it does in plain wood. Therefore, to gain more information on the adhesive performance in the bond, a loading along the LT plane seems more appropriate for beech wood used in DIN EN 302-1 (2004).     

软X—射线法测定木材生长轮密度的研究

本文开发了一种用于木材生长轮材质变异分析的软X-射线测量法,对14种木材进行了测定和分析,获得了满意的测量结果。     

竹缠绕复合管环刚度测试试验

测试了竹缠绕复合管母管的环刚度值,与母管承插连接后的环刚度值,以及母管与束节连接后的环刚度值。结果表明：DN 600管承插连接后的环刚度值为承口和插口环刚度值之和的97.3%;DN 600和DN 1 000管束节连接后环刚度值分别为束节和母管环刚度值之和的116%和107%。试验结果可为优化竹缠绕复合管的连接结构提供参考。     

桑树轮纹病病原菌的分离鉴定及其生物学特性研究

2012年6～8月,通过对桑树轮纹病病原菌分离、田间致病性测定、病原菌形态观察,将该病原菌鉴定为桑膝节霉,并对此病病原菌的生物学特性进行了研究。结果表明,不同培养基配方、温度、酸碱度、碳源、氮源、光照对桑树轮纹病病原菌菌丝的生长有一定影响,菌丝生长的最适宜培养基是理查培养基,最适温度是25℃,最适pH值是7.0,最适碳源为葡萄糖,最适氮源为蛋白胨,光照对菌丝生长无显著性差异,菌丝的致死温度和时间分别为85℃和10 min。对该病病原菌生物学特性研究为云南首次报道,对桑树轮纹病的防治具有一定的参考价值。     

The variation of tree-ring widths of Scots pine (Pinus sylvestris L.) affected by air pollution

Using eight populations of Scots pine growing in foothills of the Sudetes (southern Poland) as an example, the character and causes of annual ring variation in 1900–1999 were studied. The climate had a short-term effect on radial growth during the whole period investigated. A long-term decrease of radial growth occurred after 1960, but only in some localities. It was probably caused by non-climatic factors, most likely by industrial pollution. The decline of trees during that period is mainly evidenced by a high variation of width of annual rings, a small similarity of chronologies of annual ring widths, and a lack of signal years. After 1990, the tree recovery process was evident. It was most intensive in localities where the earlier stress was the most severe. Then, trees started to produce wide annual rings, homogeneity of the growth reaction increased, and the signal years began to occur.     

苹果轮纹病菌与干腐病菌的研究

从不同品种、不同地点的苹果树上的轮纹斑、干腐斑及病枯枝取样,观察到苹果轮纹病菌与苹果干腐病菌的有性阶段的形态特征容易区分,无性阶段在形态特征上不易区分。经人工接种,两种病原菌在果实上引起的症状相同。经测定,两菌的生物学特性及酯酶同工酶有差异,两菌的菌丝能融合。