Importance of Noncrystalline Hydroxide Phases in Sequential Extractions to Fractionate Antimony in Acid Soils

Abstract

Sequential extraction techniques have been used to make inferences about speciation of phosphorus (P) and to a lesser extent arsenic (As) in soils. However, sequential extraction studies on the less‐abundant group V element, antimony (Sb), are limited. In this work, a widely used P sequential extraction scheme was modified and used to extract P, As, and Sb from two acidic soils from the Macleay River floodplain, NSW, that were enriched with Sb (26.9 and 23.0 mg kg^?1). An ammonium oxalate–oxalic acid step was included in the extraction sequence to dissolve the noncrystalline iron (Fe) and aluminium (Al) hydroxide phase. It extracted 30 to 47% of Sb, indicating the importance of this fraction, which may be mobilized in the floodplain by acid sulfate soil processes and periodic waterlogging. The original method overestimated P, As, and Sb in the residual fraction (30–71%). Relative efficiency values of extracts for P, As, and Sb were compared, and inferences about phase distributions were made. The results suggest some potential in using extractions to assess bioavailability of Sb in soil.     

Soil CO2 emission in sugarcane management systems

Sugarcane management systems affect soil attributes such as the carbon cycle. This fact has stimulated the sugar and alcohol industry to refine the sugarcane production systems by replacing the pre-harvest burning (PB) and manual harvest with mechanized harvesting followed by residue deposition. The aim of this study was to evaluate different management systems with respect to C cycling carbon dioxide and soil parameters (chemical, physical and biological) which were determined over the season. Three sugarcane cultivation systems were evaluated at the following periods: (a) PB, (b) 5-year green harvest and (c) 10-year green harvest. The results indicated that CO₂ emission was 36% greater in the 10-year sugarcane green harvest system than in the PB system. The bulk density and macroporosity were the factors that were most affected by the different sugarcane management systems and that significantly influenced soil CO₂ emissions. The principal component analysis showed that soil CO₂ emission was 18% influenced by base saturation (V%) and 14% by pH, especially in the PB area. Additionally, 19% was affected by carbon and macroporosity in the 5- and 10-year green harvest areas, respectively. From our results, it can be concluded that the most CO₂ emissions are in the areas of sugarcane green, this is due to the higher carbon concentration when compared with the area of burning sugarcane. The parameters that most influenced the CO₂ emissions were bulk density, porosity, macroporosity, pH and V%.     

祁连山不同类型草地土壤细菌群落特征研究

祁连山是我国西部重要的生态屏障,拥有大量的草地资源。研究草地土壤细菌群落组成及其与土壤环境因子间的关系,可对维持草地生态及了解祁连山土壤细菌群落组成提供一定的数据基础。采用高通量测序技术检测并分析了祁连山默勒镇3种类型草地 （高寒草甸、人工草地、沼泽化草甸）0~10 cm土壤细菌群落结构及多样性,并对上述土壤细菌群落与土壤理化因子的相关性进行了系统的研究。结果表明：1）沼泽化草甸土壤全氮、全磷、有机质碳、含水量和硝态氮显著高于高寒草甸和人工草地（P<0.05）。2）3地共测得有效序列1022446条,以97%的一致性将序列聚类,高寒草甸、人工草地、沼泽化草甸OTU聚类均值分别是4917、5233、5075条。3）Shannon和Simpson多样性指数3地间差异不显著,Chao1指数表现为人工草地>高寒草甸>沼泽化草甸（P<0.05）。4）在门水平上,3地均以变形菌门、酸杆菌门、放线菌门和浮霉菌门为主要类群;在属水平上,表现出不同类型草地细菌富集类型不同。5）有机质碳、全磷、土壤含水量与土壤细菌群落的组成表现出极显著相关（P<0.01）。综上,祁连山地区小生境内3种草地土壤微生物群落存在差异,有机质碳、全磷、土壤含水量是影响群落的主要驱动因子。     

卷盘式喷灌机卷盘驱动负载计算与分析

为优化卷盘式喷灌机驱动结构,研制高效卷盘喷灌机驱动器,需要对卷盘式喷灌机的卷盘负载情况进行计算和分析。为此,以软管牵引式卷盘喷灌机为对象,建立了卷盘负载转矩计算的物理模型,理论推导了在运行时的卷盘负载转矩数学计算模型。以JP50和JP75型卷盘式喷灌机为例,按推导所得数学模型进行计算,得到了运行时卷盘负载转矩随已回卷PE管长度的变化规律和估计值。计算结果表明:JP50型卷盘式喷灌机运行时最大负载转矩约为960N·m,JP75型为6 001N·m;卷盘负载转矩随已回卷长度的增加而减小,且当卷盘回卷半径变化时,负载转矩将突然变大;负载转矩的大小和变化规律只与喷灌机的参数和运行条件有关,与运行时的速度无关。     

沙对高尔夫果岭坪床物理特性的影响

对28种沙与泥炭按75∶25混配而成的高尔夫果岭坪床材料的物理特性进行了评价。不同类型沙的粒径、均一性和形状有所不同。高尔夫果岭坪床的物理特性主要取决于所使用的沙的特性。对沙 泥炭混配的坪床来说,其导水率在95~827 mm/h范围内变化,总孔隙度变化范围为38.8%~47.2%,而通气孔隙度(在-3 kPa水势下)为0.9%~24.6%,毛管孔隙度(在-3 kPa水势下)为17.7%~42.1%。结果表明,排水速率和通气孔隙度与毛管孔隙度的平衡主要受沙的粒径大小的影响,起决定作用的是粒径最大和最小的沙所占的比例,而容重、总孔隙度和抗剪切强度取决于沙的均一性。当沙粒较圆且较为光滑时,坪床材料孔隙度趋向减少。沙表面越粗糙,坪床抗剪切能力就越强,而沙对坪床硬度的作用不显著。     

乌江流域茶园土壤理化性状对茶叶品质影响的研究

对乌江流域主要茶场茶园土壤理化性状、茶叶生化成份测定结果表明：不同母岩发育的土壤理化性状各不相同，其对应的茶叶品质也不相同。土壤理化性状及茶叶品质优劣依序为硅质黄壤＞砂页岩黄壤＞第四纪粘质黄壤＞小黄泥＞黄棕壤     

Physical simulation of fluid field and structure optimization in two-strand tundish

The influence of the structure and location of dam and weir on fluid flow state in a two-strand tundish is studied, and a set of optimal structure, combining with the average residence time calculated from RTD curve, is obtained. The result indicates that the fluid flow state can be changed and the path of the fluid flow can be prolonged as well as the average residence time is improved after using dam and weir. But there are some dead zones after fluid passed through the dam and weir. Combination scheme of No. one dam and weir is better than the others. Its average residence time is 299 s and the volume fraction of dead zone is 31.0%. After the optimization of flowing control parameters in tundish, the best case is that the distance between dam and weir is 290 mm and the distance between weir and the long nozzle is 383 mm. The longest average residence time is 351 s and the minimum volume fraction of dead zone is 19.0% under the above situation. Compared with that of no dam and weir, the average residence time increases by 65 s and the dead zone volume fraction decreases by 15.0%. Based on Newton formula, the calculated results show that the inclusions with diameter larger than 17.5 μm can float up within 351 s under this optimization situation.     

Developing Method Based on Object-oriented Modeling Techniques for Management Information System

A developing method is given which based on object-oriented modeling techniques for management information systems.The modeling techniques,especially,from CDM to PDM conversion,make it possible that the method can be used for developing such management information systems which based on relational database.The result shows that it can raise the efficency of the system developing,improve the system tability,enhance the system maintenability.     

MACHINE PARAMETER IDENTIFICATION AND FAULT DETECTION FOR THE ALTERNATOR SYSTEM

In this paper, the machine( physical) parameters of the alternator system are on-line estimated on the basis of the derived system continuous-tims model, using Recursive Least-squares Estimation and Inverse Calculation Method proposed by Authors. Therefore, the estimated machine parameters can effectively track the changes of their true values and accomplish the fault detection for the alternator system. This paper gives a new way for machne parameter estimation and fault detection of the alternator systems.