基于分段波形的信号瞬时频率计算方法

针对局部均值分解（Local Mean Decomposition，LMD）中乘积函数（Product Function，PF）分量的瞬时频率计算问题，引入了一种新的信号瞬时频率计算方法.该方法基于分段波形，先将信号分成若干个全波段（full wave），然后以一组递增的反正弦函数定义每个全波段的瞬时相位，进而得到信号的瞬时频率.由该方法得到的瞬时频率理论上是正的、稳定的并且能够确保信号局部特征信息的完整.应用该方法计算了仿真信号和实际齿轮故障振动信号的瞬时频率，并与其他方法求得的瞬时频率进行了对比.结果表明，本文方法非常适合求取信号的瞬时频率.     

非线性、分形与期锌市场价格

从非线性角度研究期锌市场，运用R/S分析法对期锌市场进行分析，发现期锌市场的Hurst指数为0.6183,其价格收益率序列是分维时间序列，具有分形结构，维数为1.6174。期锌市场的平均周期长度为176天，具有强持续性和相关性。关联系数为19.47%，远远大于国外相关市场。在风险方面，期锌市场的风险比期铜市场的要小，而比股票市场的风险要大。     

冷却塔混凝土粗糙度对平均风压系数的影响

采用CFD方法研究全尺寸双曲冷却塔表面混凝土粗糙度对风压系数的影响.在规范规定的粗糙度范围内，分别对表面混凝土光滑以及表面混凝土有不同粗糙度高度的冷却塔全尺寸模型进行了数值模拟.将不同工况下的风压系数计算值与以往文献的风洞试验和现场实测数据进行了比较.研究结果表明：冷却塔全尺寸CFD模拟虽然解决了雷诺数相似问题，但纯粹的光滑壁面冷却塔在CFD计算中得到的平均风压系数比实际值偏离较大；在冷却塔全尺寸CFD模拟中必须考虑实际冷却塔表面的粗糙度对其平均风压系数的影响.     

基于霍尔效应的微小压强测量装置的设计与实现

针对化工液体的微小压强测量中所存在的测量复杂、精度低的问题，设计一种基于霍尔效应的测量流体微小压强变化的装置。该测量装置通过前端受力装置来承受液体压强的变化而产生一定的位移，并转换成霍尔电动势，经放大调理电路，最后接电压表显示相应的电压值。根据输出电压与液体压强之间的关系即可得到相应深度的压强大小。在实验中，电压表精确到1mV，最小可测量到0.792Pa的压强变化，其测量精度较高。该装置体积小、通用性强，具有较好的应用前景。     

炭化条件对竹原纤维炭孔隙结构的影响分析

为研究炭化竹原纤维的特性,进一步提升竹原纤维的使用性能,拓宽竹原纤维的应用领域,采用可控电炉制备了不同炭化温度和不同保温时间条件下的炭化竹原纤维,利用全自动比表面积及孔隙度分析仪测试了炭化竹原纤维的比表面积、比孔容及平均孔径,探讨了炭化条件对其性能的影响。结果表明：随炭化温度的升高和保温时间的延长,炭化竹原纤维的比表面积、比孔容和孔径分布先增大后减小,在较优的工艺条件下,炭化竹原纤维的比表面积和比孔容最大值分别可达819.35m2/g和0.7358cm3/g,平均孔径最小可达2.0836nm。     

杉木老龄林群落的种-多度关系研究

以杉木老龄林群落为研究对象,结合对数级数和对数正态分布模型,建立3 600 m2的大样地分析杉木老龄林群落的种-多度关系。结果表明:样方的平均物种数和个体数分别为6.86种和35.75株,各样方的物种数及个体数存在极显著正相关关系,说明杉木老龄林群落中生境空间对物种个体的承载能力,还未限制其物种数量。个体数-种序(p>0.05)和频度-种序(p>0.05)的分布曲线均符合对数级数分布;对数正态分布模型则能够较好拟合个体数-种序(p>0.05)的分布曲线,但频度-种序(p<0.05)的分布曲线则不适合用该模型来解释。随着尺度的增加,物种数和个体数的变异系数、二者间的相关性及物种数的方差逐步下降,个体数的方差却呈上升的趋势。     

不同通风工艺在浅圆仓中应用的研究

在对大豆进行冬季通风作业时,采用正压上行压入式、负压下行吸出式和先负压后正压三种作业方式分阶段进行通风,充分的利用自然冷源,达到降温目的,通过对比三种作业方式的降温效果、水分损耗、降温能耗、人工投入等,并根据粮情,找出最合适的通风方式。     

Organic input quality is more important than its quantity: C turnover coefficients in different cropping systems

Annual C input to soil is a major factor affecting soil organic carbon (SOC) dynamics. However different types of C-sources can have different behaviour, in relation to their chemical characteristics and how they interact with soil. Root-derived C, in particular, should be more efficient than other organic materials as a result of the physicochemical and biological characteristics of the surrounding environment, leading to a reduction in the C decomposition rate.To test this hypothesis, we considered a long-term experiment underway in Northern Italy since 1962, comparing permanent meadow and 6 different crop rotations over a wide range of nutrient inputs, in both organic and inorganic forms. C inputs from amendments were measured and those from crops were calculated using allometric functions and crop and residues yields. The time evolution of SOC was studied through a single-pool, first-order kinetic model, allowing the estimation of humification coefficients for residues, roots, farmyard manure and cattle slurries.The highest value of the humification coefficient was estimated for farmyard manure, which confirmed its high efficiency in stabilising SOC content. Root C presented a humification coefficient 1.9 times higher than above-ground plant materials while slurries were intermediate, with a humification coefficient roughly half that of farmyard manure and even lower that of roots.The quality of C input thus seems of fundamental importance for evaluating the sustainability of different cropping systems in terms of SOC dynamics.     

The effect of orifice shape and the injection pressure on enhancement of the atomization process for pressure-swirl atomizers

The following paper presents results of studies on the atomization process of water in pressure-swirl atomizers with different shapes of orifice using a laser diffraction technique. The effect of the shape of the orifice and the injection pressure on the droplet size distributions and mean droplet diameters was analyzed. The results obtained showed that droplet size decreases with an increasing injection pressure and droplet size distributions are expanded. The smallest droplet diameters were obtained by atomization in profiled and conical shaped orifice atomizers, however the largest droplet diameters were achieved for plain orifice atomizers. The analysis of the interfacial surface produced by the atomizers has shown that the greater enhancement of the atomization process had occurred using profiled and conical shaped orifice atomizers compared with plain orifice atomizers. The correlation for the Sauter mean diameter as a function of the Reynolds number and the ratio of orifice length to diameter has been proposed. The paper is related to agricultural water management. The data obtained are important from the point of view of the design of atomizers, agricultural treatments and crop protection.