木材干燥导水系数和换水系数的研究

木材(板、方材)的导水系数和换水系数是反映木材干燥或存放过程中水分迁移的重要物性参数。然而,我国对木材导水系数和换水系数的研究和测定工作十分有限。木材干燥有关的理论计算中,常用原苏联的数据。由于这些数据本身可能存在的误差及用于我国树种的可靠程度难以估计,故使理论结果的实际运用受到限制。本文采用等厚试件系数分离法研究和测定了木材干燥过程动态导水系数和换水系数。     

用简易诊断法检查判断液压系统各元件的工作性能

故障的排除首先在于判断，目前基层维修网点大多数没有检测仪器和设备，出了故障乱拆乱卸，导致液压元件工作失灵，甚至整车液压系统瘫痪。拖拉机液压系统产生故障的主要原因是液压元件工作性能恶化引起的。为此，介绍了在没有检测仪器和设备的条件下，如何应用简易诊断法检查判断各液压元件的工作性能。     

邓恩桉组培中影响继代增殖条件的研究

探讨抗寒树种邓恩桉组培快繁中影响其继代培养的因素。实验表明,继代培养以改良MS为基本培养基,随继代次数的增加逐渐减少细胞分裂素BA和生长素NAA的浓度。最初几次继代,BA的浓度为0.5 mg/L,NAA的浓度为0.2 mg/L。然后BA的浓度逐渐降低到0.1~0.3 mg/L,NAA的浓度逐渐降至0.05~0.1 mg/L,继代5~6次后,BA的浓度保持在0.1~0.3 mg/L,NAA的浓度保持在0.05~0.1 mg/L。继代周期随季节而不同,夏季为15~25 d,春秋季为20~35 d,冬季为40~50 d,芽的月增殖系数为3~5倍,满足工厂化育苗的要求。组培苗的玻璃化和遗传变异等异常现象很少,节间长度适中,有利于生根。     

Radiation Balance Components of Maize Hybrids Grown at Various Plant Densities

Components of the energy and heat balances were examined in two maize hybrids grown at three different plant densities (40, 70 and 100 thousand plants per hectare). One of the hybrids was drought tolerant, while the other was bred for cultivation under irrigated conditions. An increase in plant density influenced not only the size of the leaf area, but also the distribution of the leaves at various plant heights. The extinction coefficient, which provides a quantification of radiation penetration, was higher in the irrigated treatments. By contrast to the other two treatments, the plant canopy in the thinly sown stands remained open throughout the vegetation period, and thus behaved quite differently to the closed stands, making it impossible to compare them. Smaller albedo values were recorded for the hybrid bred for irrigation and in thinly sown stands. The low plant density allowed more energy to reach the soil, from which it was reflected, making a considerable contribution to the final temperature in the stand. The latent heat, in keeping with the quantity of water transpired, was the greatest in the densely sown stands. There was little difference between the latent heat values of the normal and dense stands in either hybrid, indicating that they both had a similar sensitivity to increased stand density. If sufficient water is available it would appear that the stand density could be increased even for the drought-tolerant hybrid.     

Application of acoustic Doppler current profiler combined with a scientific echo sounder for krill Euphausia pacifica density estimation

ABSTRACT:   An application of the acoustic Doppler current profiler (ADCP, 153.6 kHz) in combination with a scientific echo sounder (EK60, 38 and 200 kHz) was investigated to estimate the density of krill Euphausia pacifica . The acoustic backscattering strength from sound scattering layers was compared with biomass estimates from midwater trawls. Euphausia pacifica was targeted among mixed species populations in the sound scattering layer in the offshore Funka Bay area of Hokkaido, Japan. The frequency characteristics of acoustic backscattering by krill were calculated using a distorted wave Born approximation scattering model at three frequencies. Krill aggregations identified from the EK60 data were extracted as the mean volume backscattering strength difference between two frequencies. They were then used to identify similar aggregations in the ADCP data by matching observation times and depths for the two methods, which were applied simultaneously. Results from the comparison of the mean volume backscattering strength and the density calculated from the ADCP and EK60 showed that ADCP can be used to measure density and spatial–temporal distribution of krill aggregations. Current speed and direction at the study site were found to be 16.1 cm/s and 187.0°, respectively, and krill speed and direction (including the current component) were found to be 19.8 cm/s and 172.2°, respectively. Based on the ADCP data, the net speed and direction of the krill aggregations were found to be 5.9 cm/s and 128.0°, respectively.     

Evaluation of Five Most Commonly Grown Cotton Cultivars (Gossypium hirsutum L.) Under Mediterranean Conditions: Productivity and Fibre Quality

Studies were conducted in four regions of central Greece (Larisa, Karditsa, Livadia, Thiva), to evaluate the productivity and fibre properties (fibre strength and fibre length) of the five most commonly grown cotton cultivars in these regions. The experiments lasted for 6 years (1995–2000). All the characteristics tested were strongly influenced by the factors ‘year’, ‘cultivar’ and ‘region’. Significant cultivar × region, year × cultivar, region × year and cultivar × region × year interactions occurred for all the characteristics studied. The cultivar Alegria had the highest seed‐cotton and lint yield, while Aria had the lowest ones. Both cultivars gave the highest mean lint percentage but the lowest mean boll weight (MBW). Alegria had the lowest fibre strength, while Aria had the highest. The Acala‐type cultivars, Acala SJ2 and Zeta 2, had intermediate seed‐cotton and lint yield, while Vered 171 had high seed‐cotton and satisfactory lint yield. The three cultivars mentioned above had the highest MBW and very good fibre strength. Positive correlation was observed between fibre strength and length. In spite of the fact that mean fibre length was statistically the same in all cultivars, it was influenced by the factor ‘year’, as a result of different weather conditions. The year 1996 was the most unfavourable one for seed‐cotton yield and MBW, because it was characterized by lower than average air temperatures and rather dry conditions for all study sites. The factor ‘region’, a combination of different climatic conditions and cultural practices, influenced significantly all the parameters studied.     

Study on ambient noise in sawmill’s workshop

Ambient noise in 13 sawmill’s workshops was tested and analyzed to reveal its character and regularity. The situation of the ambient noise in sawmill’s workshops was evaluated     

手动比例复合阀在中高压液压绞纲机中的应用

中高压液压技术在海洋捕捞机械—绞纲机中的使用推动了我国渔业机械的发展,手动比例复合阀在中高压液压技术上的应用则大大加快了液压绞纲机在国内渔业生产中的普及。目前,我国浙江、江苏、福建、广东和山东等省沿海渔民使用的绞纲机普遍采用带手动比例复合阀的液压系统。为此,对手动比例复合阀换向、溢流、调速集成等功能进行了分析。     

可控止回阀水力特性的测试研究

本文运用水流相似原理，对可控止回阀的流阻系数曲线和动水力矩，进行了系统的水力模型试验研究，为该阀的节能效益和技术开发的可行性，提供了必要的科学依据，其流阻系数值为０．１９，优于液控蝶阀。     

二化螟群集性的调查研究

通过对二化螟群集性的调查分析,初步查明在不同类型田、水稻的不同生育期、二化螟幼虫的不同龄次,二化螟幼虫的群集性不同.这为科学制订二化螟防治指标提供了理论依据。