我国松毛虫发生率的空间分布格局及其驱动因子

了解我国松毛虫发生的空间分布格局及其驱动因子, 对松毛虫暴发的预防?控制和治理具有重要意义?本研究基于我国各行政区2004年-2012年间每年松毛虫发生面积及其寄主植物面积, 使用一般线性模型分析气候因子是否以及如何驱动我国松毛虫发生的空间分布格局?结果表明:在全国尺度上, 最暖季降水量是松毛虫发生的主要气候驱动因子, 松毛虫平均发生率与最暖季降水量显著正相关?在最暖季降水量的作用下, 我国松毛虫的发生呈现明显的空间分布格局, 最暖季降水量较高的南方和北方部分地区松毛虫发生率较高, 而降水量较低的西北和青藏地区松毛虫发生率较低?我们的研究结果可为松毛虫暴发的预防和管理工作提供指导?     

Biodegradation of Linear Alkyl Benzene Sulphonate

The paper researches on the degradation of LAS (Linear Alkyl benzene Sulphonate) by combining AS1.860 immobilized with low intensity ultrasonic irradiation. The paper also discusses the influence of pH, rotary velocity, LAS concentration and the condition of low intensity ultrasonic irradiation on the degradation of LAS, the degradation rate of LAS is the main index of our experiment, the results of orthogonal test shows that low ultrasonic irradiation can increase the metabolizing of microorganism cells and facilitate the biodegradation of immobilized cells to LAS, here we research the degradation condition of 50mg/L LAS simulation wastewater with low ultrasonic irradiation, and the results show that the influence is obvious, the optimization degradation rate is about 83%, nine point five percent higher than that of the immobilized cells without ultrasonic irradiation.     

A MIMD PARALLEL ALGORITHM TO SOLVE TRIDIAGONAL TOEPLITZ LINEAR EQUATIONS

The rank one updating formula and the parallel eliminating algorithm for linear recurrence systems ane combined fo form a MTMD parallel algorithm fo solve tridiagonal Toeplitz Cinear equations. This algorithm has a simple strictire and requires onlty a few storages as well as in-terprocessor communications. There is no special demand on the number of processors in the parallel system. The speedup can come dose to p12 comparing with the LU decomposition method (p is the number of processors). It is worth pointing out that it is proposed algcmthn that considels and organizes the parallel arithmetic in the first order linear ricurrence systems with constant coefficients.     

NETWORK FEOW APPROACH TO RELIABILITY EVALUATION IN IARGE SCALE NETWORKS BY MIXING INCREASING ELOW WITH DECREASING FLOW

Based on the maximum flow principle about networks, a network flow approach to reliability evaluation in large scale netwerks ty mixing inereasing flow with decreasing flow is proposed in this paper.This approach gets the initial flow of each branch in a r.etwork associated with a state of the retwork by decreasing flows of some branches correlative to another state of the network.As a result, the number of flow compute required can be reduced enormously.The numerical example shows that the approach is powerful. The comparison of this approach with the minimal cutset one is also given in this paper.     

Application of Slicing in Component-based System Regression Testing

In component-based system regression testing, the dependence model of component-based system should be built in order to confirm the part which will be affected by modify. Since high reusability and high complexity, the existing dependence models may not be applicable to component-based systems, a hierarchical dependence model is proposed to describe component-based. Through the forward slicing of modified points in the model, the modified and affected parts can be gotten, then traverse these parts and get affected testing path, thereby regression testing examples can be chosen effectively, the efficiency of regression testing can be improred.     

Regression Applied in Continuous Mathematical Forecast

Data Mining can distill the connotative, unknown and potential value information or pattern from many data. It is a problem that must be settled during the developing of Decision Support System how to discover knowledge from Data Warehouse. In order to realize the continuous mathematical forecast that will be used in the Marketing Decision Support System for Industrial Enterprise, the authors use the method of regression to discuss how to design the algorithm for Data Mining, how to design the model for Data Mining, and so on. When the algorithm applied to the sales forecast, the result processing to simulation data indicates it can realize the expected effect.     

THE DEVELOPMENT OF COMPUTER AIDED NORM OF WORKING HOUR PLANNING SYSTEM

Based on Group Technology, part families of the norm of working hour are formed according to the similarity among components. With the progressive regerssion, the models of the norm of working hour are built for every part family. A computer aided norm model building program and a computer aided norm of working hour planning system are developed. The system is successfully integrated with CAD/CAPP system. Some examples of the model building and calculation results are illustrated as well.     

Transmission Congestion Management Based on Power Influence Coefficient

Basing eliminating on the idea that the generator who has the most influence on the power flow of line is mostly in favor of transmission congestion, the model of congestion management with the object of minimizing adjustments of bufions varied with generation outputs is proposed. It can eliminate the congestion effectively by judging the generators who should be adjusted and the amounts of adjustment. The test on IEEE-RTS24 buses system and other practical systems show that the proposed method is effective.     

RESEARCH ON A KIND OF GREY LINEAR PROGRAMMING AND THEIR DUAL THEORIES

In this paper, a kind of grey linear programming with grey interval coefficients is discussed,the definitions of the first and second whitenized linear programmlngs and the grey dual linear programmings are presented, the relationships between the solutions of the above three kinds of programming and the solution of the primal programming are explored, and some new conclusions are obtained.