真空化学热处理多用炉的研究

A new type of versatile vacuum electric furnace for chemical heat treatment is developed, in which the low vacuum structure heating outside, the NH_3 auto-disintegrating instrument, the technology of ultra-red heating, TTL automation and the diverse distr     

Yield Stability of Winter Wheat (Triticum sp.) Cultivars and Lines

The purpose of this study was to compare responsiveness to environment as well as the stability of newly developed promising lines with traditional commercial cultivars. Subject research was conducted in Ankara between 1983-1989 on common and durum wheat cultivars and lines. Regression coefficient (b) was used as the criterion of genotypes' responsiveness to environment whereas deviation from regression (S²d) and coefficient of determination (r²) were used as stability parameters. Each experiment year was regarded as an environment and yield average of each year was used as the environmental index.
In consequence of the research, it was determined that new varieties with high yield, adaptable to diverse environments could be developed by means of hybridizations between parents having different genetic characteristics which were provided from diverse ecological regions.     

三分域模型在研究单胃动物内源氨基酸排泄中的应用

本文在分析三分域链状系统模型及单胃动物内源氨基酸排泄特点的基础上 ,讨论了如何将三分域链状模型用于单胃动物内源氨基酸排泄模式的确定。研究分三步进行 :1.测定动物血液体积 ;2.静脉连续灌注同位素标记的氨基酸并使之于体内达到平衡 ;3.检测消化道中同位素标记氨基酸的排泄率。文章指出 ,若能对所有必需氨基酸的内源排泄率均进行测定 ,则可得出内源氨基酸排泄模式 ,因而在实际测定饲料或日粮真可消化氨基酸含量时 ,只需测定某种氨基酸的内源排泄量即可知其它氨基酸的内源排泄状况     

福建林区运材汽车评价模式的探讨

根据福建林区道路状况，结合农用货车性能特点，建立运材汽车评价模式，对福建林区四种有代表性的运材汽车进行了评价、并按综合性能优劣进行排序。研究结果发现：HFC1060为最优车型，NJ1060为次优型。     

微生物谷氨酰胺转胺酶(MTG)分批发酵模型的建立

在本文中，以本实验优化好的工艺条件，建立了关于微生物谷氨酰胺转胺酶分批发酵的数学模型方程细胞生长的动力学方程、产物合成的动力学方程和底物消耗的动力学方程。并对所建立的动力学方程进行了生物统计分析，结果表明所建立的模型具有一定的可信度。     

猪血免疫球蛋白的热稳定性及动力学研究

为了使猪血免疫球蛋白在各类食品中得到较好的应用 ,对猪血免疫球蛋白 (PIgG)的热稳定性及热变性动力学进行了分析研究。结果表明 ,PIgG在 6 0℃以下很稳定 ,6 0～ 6 5℃比较稳定 ,大于 70℃变性明显加快 ,超高温杀菌 (12 0℃ ,4s)条件下 ,PIgG几乎失活 ;其热动力学反应为 1 2级 ;在 6 0 ,6 5 ,70 ,75 ,80 ,85和 90℃ ,PIgG热变性的D值分别为 33 333× 10 3 ,14 2 86× 10 3 ,3 333× 10 3 ,0 4 76× 10 3 ,0 2 2 2× 10 3 ,0 16 9× 10 3 和 0 0 76× 10 3 s ,在此温度范围内的Z值为 10 81℃ ,表观活化能为 2 2 7 31kJ·mol-1。     

Application of acoustic Doppler current profiler combined with a scientific echo sounder for krill Euphausia pacifica density estimation

ABSTRACT:   An application of the acoustic Doppler current profiler (ADCP, 153.6 kHz) in combination with a scientific echo sounder (EK60, 38 and 200 kHz) was investigated to estimate the density of krill Euphausia pacifica . The acoustic backscattering strength from sound scattering layers was compared with biomass estimates from midwater trawls. Euphausia pacifica was targeted among mixed species populations in the sound scattering layer in the offshore Funka Bay area of Hokkaido, Japan. The frequency characteristics of acoustic backscattering by krill were calculated using a distorted wave Born approximation scattering model at three frequencies. Krill aggregations identified from the EK60 data were extracted as the mean volume backscattering strength difference between two frequencies. They were then used to identify similar aggregations in the ADCP data by matching observation times and depths for the two methods, which were applied simultaneously. Results from the comparison of the mean volume backscattering strength and the density calculated from the ADCP and EK60 showed that ADCP can be used to measure density and spatial–temporal distribution of krill aggregations. Current speed and direction at the study site were found to be 16.1 cm/s and 187.0°, respectively, and krill speed and direction (including the current component) were found to be 19.8 cm/s and 172.2°, respectively. Based on the ADCP data, the net speed and direction of the krill aggregations were found to be 5.9 cm/s and 128.0°, respectively.     

双斜立式油缸木材抓具优化设计研究

通过对现行木材生产中所使用的双斜立式油缸木材抓具的受力情况的深入分析。推导了双斜立式油缸木材抓具在两种不同的工作状态下的抓取力计算公式。在此基础上,结合现代先进的设计方法——优化设计法的基本思想,建立了该类型木材抓具优化设计的数学模型。根据数学模型的特点,给出了能够处理约束优化问题的优化计算方法——内点惩罚函数法,编制了该方法的计算机程序,并对程序的使用进行了必要的说明。     

高等院校学生“团队工作”能力培养模式构建及其绩效评价研究

阐述“团队”、“团队工作”理论内涵,详述学生“团队工作”能力培养模式的四个阶 段、主要内容和阶段目标,并初步确立团队工作效绩评价的指标体系和评估方法。