基于滚筒的打后碎片筛分工艺

为改善打后筛分工艺,降低投资运行成本,方便维护保养,对比分析了分别以振筛和滚筒为关键筛分设备的两种打后筛分工艺,从工艺设计依据、质量分析、投资运行、维护保养和持续改进等方面阐述了滚筒式打后筛分工艺的特性.结果表明,该工艺具有成熟的理论和实践基础,工序本身不会引起片烟过多的造碎和卷曲,而且在设备投资、维护保养和改进空间等方面,具有振筛式打后筛分工艺所无法比较的优越性.     

Toxicity of Bacillus thuringiensis Crystal Toxins to Field Populations of Rice Leaf Folder, Cnaphalocrocis medinalis （Guenee） and Establishment of Baseline Susceptibility to Cry1Ab

Eight insecticidal crystal proteins of Bacillus thuringiensis, CrylAa, CrylAb, CrylAc, CrylB, Cry2Aa, CrylC, CrylDa and Cry 1Ea were assessed for toxicity against 1 st instar larvae of rice leaf folder, Cnaphalocrocis medinalis （Guenee） at 48 HAT and 72 HAT. Bioassay results depicted CrylAa was the most toxic （LCso 2.35 ppm） followed by CrylBa （LCso 8,50 ppm） and CrylAb （LCso 8.73 ppm） at 48 HAT, whereas, at 72 HAT CrylAb proved to be highly toxic （LC50 0.50 ppm） followed by CrylAa （LCso 4.07 ppm）, CrylAc （LCso 4,84 ppm） and CrylBa （LCso 6.42 ppm）. Toxins Cry2Aa, CrylCa, CrylDa and CrylEa did not resulted in any mortality at 48 HAT and 72 HAT, respectively. Baseline estimates for CrylAb against 1st instar larvae of C. medinalis sampled from seven geographical locations revealed variation in LC50＇s from 0.37 ppm to LC50 16.25 ppm at 48 HAT and LC50 0.50 ppm to LC50 6.49 ppm 72 HAT, respectively with relative resistance ratios of 44-fold and 13-fold at 48 HAT and 72 HAT over the susceptible population.     

参考群筛选方法及规模对基因型填充准确性的影响

为探究基于A矩阵期望遗传关系最大化（maximizing the expected genetic relationship for matrix A,RELA）、基于A矩阵目标群体遗传方差最小化（minimized the target population genetic variance for matrix A,MCA）、平均亲缘关系最大化（the highest mean kinship coefficients,KIN）、随机选择（random selection,RAN）、共同祖先筛选（common ancestor,CA）等不同参考群筛选方法及参考群规模对基因型填充准确性的影响。本研究使用矮小型黄羽肉鸡作为试验群体,采用鸡600K SNP芯片（Affymetrix Axion HD genotyping array）进行基因分型,测定435羽子代公鸡45、56、70、84、91日龄体重。利用Beagle软件将低密度SNP芯片填充为高密度SNP芯片数据,比较不同参考群筛选方法、参考群规模对基因型填充准确性的影响,以及填充芯片基因组预测准确性。结果表明,使用Beagle 4.0结合系谱信息进行填充效果最佳,其次为Beagle 4.0,而Beagle 5.1填充效果最差。使用MCA方法筛选参考群进行基因型填充准确性最高,使用RAN方法筛选参考群进行基因型填充准确性最低,MCA、RELA、CA 3种方法基因型填充准确性差别较小。相比其他方法,使用MCA方法筛选个体作为参考群将低密度SNP芯片填充至高密度SNP芯片进行基因组选择的预测准确性较高,与真实高密度SNP芯片的基因组预测准确性相差甚微。随着参考群规模增大,基因型填充准确性也随之增加,但增速逐渐下降,最后趋于平缓。综上所述,可以通过参考群筛选方法构建参考群以及控制参考群规模,以保证基因型填充和基因组预测准确性并节省成本,本研究为基因型填充在畜禽遗传育种中的应用提供技术参考。     

黄连及黄连须、黄连茎叶体外抗氧化活性的谱效关系研究

测定黄连与黄连须、黄连茎叶主要生物碱含量并建立高效液相(HPLC)指纹图谱,分析其抗氧化活性的谱效关系。采用HPLC分析比较黄连及黄连须、黄连茎叶中小檗碱、表小檗碱、药根碱、黄连碱、巴马汀含量差异并建立指纹图谱,通过羟自由基(·OH)、1,1-二苯基-2-三硝基苯肼(DPPH)自由基、2,2-联氮基双(3-乙基苯并噻唑啉-6-磺酸)(ABTS)自由基体外清除试验与总还原力试验评价其体外抗氧化活性差异,应用Pearson相关系数法分析HPLC指纹图谱与抗氧化活性的谱效关系。结果发现小檗碱、巴马汀含量为黄连>黄连茎叶>黄连须;药根碱、黄连碱和表小檗碱含量为黄连>黄连须>黄连茎叶;总还原力为黄连>黄连茎叶>黄连须,·OH、DPPH、ABTS·+自由基清除力为黄连茎叶>黄连>黄连须;总还原力与各峰均有较强相关性,·OH、DPPH、ABTS·+自由基清除力与4号峰相关性较强。说明黄连茎叶体外抗氧化活性较强,黄连须与黄连茎叶均有一定药用开发价值。     

口感化及颗粒化开食料对早期断奶羔羊生长和胃肠道发育的影响

分析探讨口感化及颗粒化开食料对早期断奶羔羊生长和胃肠道发育的影响。选取新生健康的双羔湖羊公羔42只,随机分为两组,分别饲喂颗粒化和口感化开食料,试验期42 d。两组羔羊21日龄之前的采食量、体重和绝对生长的变化趋势相似。21日龄以后,口感化开食料组羔羊的采食量、体重、绝对生长和相对生长均明显高于颗粒化开食料组,42日龄体重、后两周的采食量及15～21日龄的相对生长率在两组间有显著差异(P < 0.05)。口感化开食料还显著提高(P < 0.05)了羔羊42日龄时的育肥指数、体长指数、胸围指数、管围指数和断奶前的瘤胃质量和瘤胃/胴体。以上结果表明,与颗粒化开食料相比,口感化开食料更有利于羔羊早期断奶前后的瘤胃发育、采食量提高、体重和体尺的发育,但对其他胃室及肠道发育没有影响。     

计算机视觉技术在智慧羊场中的研究进展

智慧羊场具有科学化、标准化管理的优点,是羊场转型发展的趋势。计算机视觉技术是人工智能的核心,可以实现非接触性、自动化、实时监测羊的个体信息。本文总结并分析了计算机视觉在羊场的个体识别方法、行为识别方法、体尺与体重估测、疾病监测的研究现状,并指出计算机视觉在智慧羊场的进一步发展趋势。 [关键词] 计算机视觉|智慧羊场|个体识别|行为识别|体尺与体重估测|疾病监测     

不同水分环境下玉米叶面积QTL定位及候选基因分析

玉米叶面积的大小及分布特征不仅影响其光合效率、蒸腾速率,而且与其耐旱性、耐密性、抗倒伏性及产量形成紧密相关。深入剖析不同水旱环境下玉米不同生育时期不同叶位叶面积的分子遗传机理对玉米耐旱高产新品种的选育具有重要意义。本研究以构建的2套F_2∶3群体为试材,在8种水分环境下,采用复合区间作图法（CIM）和基于混合线性模型的复合区间作图法（MCIM）对玉米相应叶（V₁₈时期第10片叶、R₁时期穗三叶）叶面积进行单环境和多环境联合QTL分析;参考玉米基因组B73 RefGen_v3挖掘稳定表达的QTLs （sQTLs）区间内的候选基因,并对其进行功能分析。结果表明,采用CIM法,单环境下2个生育时期2套F_2∶3群体间总共定位到了7个玉米相应叶叶面积QTLs,主要受显性（81.0%）、部分显性（14.3%）和超显性（4.7%）等遗传效应的调控,其中在干旱环境下定位到了5个QTLs。采用MCIM法,在2套F_2∶3群体间总共检测到6个相应叶叶面积的联合QTLs,其中1个表现为显著的QTL与环境的互作（QTL×E, Bin 2.08~2.09）,1对QTLs （Bin 1.08~1.10与 Bin 2.08~2.09）参与了显著的加性与加性（AA）上位性互作。结合CIM和MCIM法进一步分析在2套F_2∶3群体间检测到了6个sQTLs,其分别位于Bin 1.08~1.10、Bin 2.08~2.09、Bin 4.08~4.09、Bin 6.05、Bin 8.03和Bin 10.03处,并在这些sQTLs区间内确定了12个玉米叶发育相关候选基因。采用生物信息学,总共收集了75个玉米叶发育相关候选基因,通过系统进化树分析表明,这些候选基因划分为3大进化分支,且上述检测到的12个候选基因分布于这3大进化分支上。这些结果为系统地解析玉米不同生育时期不同水旱环境下相应叶叶面积的分子遗传机理提供理论依据,检测到的sQTLs可作为叶面积改良的重要染色体区段,检测到的候选基因为其进一步克隆、功能分析及育种应用提供了信息参考。     

高产棉花太阳辐射能利用率及干物质分配规律研究

通过对1988～1989年高产棉花栽培试验结果进行分析发现,棉花的太阳辐射利用率在叶面积系数小于2.0时随叶面积系数的增加而线性增加,大于2.0时增加变缓。从生育时间看,7月中旬前太阳辐射利用率指数上升,7月中旬至8月底相对稳定在1.2～1.4克/兆焦左右,9月以后又不同程度线性下降。生长季内子棉太阳辐射经济效率1988和1989年分别为0.14和0.15克/兆焦。收获指数与最大叶面积系数呈显著负相关;盛花期之前棉株各器官之间的同伸关系或明显,盛花期后器官的生长相互间无明显的确定性关系。如能调节密度与叶面积系数的关系,使得既提高5～6月的辐射能利用率,同时使7～8月叶面积系数维持在3.0～3.5的适宜范围内,9～10月群体又不早衰,则有利于获得高产。     

Impact of variation in structure of condensed tannins from sainfoin (Onobrychis viciifolia) on in vitro ruminal methane production and fermentation characteristics

Our study investigated the effects of condensed tannins (CT) on rumen in vitro methane (CH₄) production and fermentation characteristics by incubating lucerne in buffered rumen fluid in combination with different CT extracts at 0 (control), 40, 80 and 120 g CT/kg of substrate DM. Condensed tannins were extracted from four sainfoin accessions: Rees ‘A’, CPI63763, Cotswold Common and CPI63767. Gas production (GP) was measured using a fully automated GP apparatus with CH₄ measured at distinct time points. Condensed tannins differed substantially in terms of polymer size and varied from 13 (Rees ‘A’) to 73 (CPI63767) mean degree of polymerization, but had relatively similar characteristics in terms of CT content, procyanidin: prodelphinidin (PC: PD) and cis:trans ratios. Compared to control, addition of CT from CPI63767 and CPI63763 at 80 and 120 g CT/kg of substrate DM reduced CH₄ by 43% and 65%, and by 23% and 57%, respectively, after 24‐h incubation. Similarly, CT from Rees ‘A’ and Cotswold Common reduced CH₄ by 26% and 46%, and by 28% and 46% respectively. Addition of increasing level of CT linearly reduced the maximum rates of GP and CH₄ production, and the estimated in vitro organic matter digestibility. There was a negative linear and quadratic (p < 0.01) relation between CT concentration and total volatile fatty acid (VFA) production. Inclusion of 80 and 120 g CT/kg of substrate DM reduced (p < 0.001) branched‐chain VFA production and acetate: propionate ratio and was lowest for CPI63767. A decrease in proteolytic activity as indirectly shown by a change in VFA composition favouring a shift towards propionate and reduction in branched‐chain VFA production varied with type of CT and was highest for CPI63767. In conclusion, these results suggest that tannin polymer size is an important factor affecting in vitro CH₄ production which may be linked to the CT interaction with dietary substrate or microbial cells.     

A review of factors influencing litter size in Irish sows

Many factors influence litter size. These include genetics, gilt management, lactation length, parity distribution, disease, stress and boar fertility. In the past 20 years, litter size in Irish sows has increased by only one pig. Born alive figures now average at 11.2 pigs per litter. In this regard, Ireland is falling behind our European competitors who have made significant advances over this time. Denmark, for example, has an average figure of 12.7 pigs born alive per litter and France an average of 12.5. The single area that could be improved immediately is sow feeding. It is important that sows are fed correctly throughout pregnancy. If over-fed during pregnancy, sows will have depressed appetite during lactation. If underfed in pregnancy, sows will be too thin at farrowing. The correct way to feed a pregnant sow is to match her feed allocation to her requirement for maintenance, body growth and growth of her developing foetuses. During lactation, sows should be given as much feed as they can eat to prevent excessive loss of body condition. Liquid-feed curves should be such that lactating sows are provided with a minimum mean daily feed supply of 6.2 kg. A small proportion of sows will eat more and this could be given as supplementary dry feed. Where dry feeding is practised in the farrowing house, it is difficult to hand-feed sows to match their appetite. Ideally ad libitum wet/dry feeders should be used. From weaning to service, sows should once again be fed ad libitum. If liquid feeding, this means giving at least 60 MJ DE (digestible energy) per day during this period. If dry feeding, at least 4 kg of lactation diet should be fed daily. The effort spent perfecting sow feeding management on units should yield high dividends in the form of increased pigs born alive per litter.